... Linksys uses/used Reverse-Polarity TNC connectors, these can be purchased from companies such as RF Parts Co. : http://www.rfparts.com/connectors.html Make...
There is a new, experimental wireless link analysis CGI at: http://gbppr.dyndns.org/wireless.super.main.cgi It now generates graphs that show the required...
What have you tried so far? We have some used amps in our warehouse. Need to know your antenna: brand & model, radio: brand & model, desired coverage area,...
Jimmy Fitch
jfitch@...
Apr 9, 2003 4:42 pm
639
... Mount it up as high as you can and use directional antennas at all locations. RF Power amplifiers are only needed in worst-case situations....
Im trying to get through a building , im using a omni 8 dbi , its not mounted very high tho only about 7 feet off the ground . this will be covering an area of...
... Try to get that antenna up higher. Radio Shack sells stackable 5 foot poles you can stick together to make a taller mast. The general area around the...
New utility to check out: Microwave Radio Path Analysis http://gbppr.dyndns.org:8080/path.main.cgi Plots terrain, radio paths, Earth curve, and Fresnel radius....
Anyone experiment with a USB DVB receiver with a downconverter as the hardware basis for a spectrum analyzer? jim tarvid...
tarvid
tarvid@...
Apr 16, 2003 11:32 am
644
does anyone know where i can buy a single bulkhead n connector? i've tried radio shack and looked on ebay. most sellers don't offer singles, and i only need...
www.aerialix.com will sell you singles.. and thier cables are pretty cheap as well. I know they have N bulkheads, not sure for what cable group though.. ...
Brian Oblivion
oblivion@...
Apr 16, 2003 1:15 pm
646
Untitled DocumentSubject: Low-speed, single chip TI FSK eval board for $99 Is this too slow (38.4 kbps) to be of any interest to this list? The advantage seems...
Thanks for the info but its all going to be down for a few days now, there was a bad storm here and it knocked a tree limb into my antenna !!!! . I am using a...
... Another little bit of information if you are using an outdoor antenna is too make sure the antenna and mast/hardware are properly Earth grounded, otherwise...
... Also RF Parts Company, www.rfparts.com is now carrying the hard-to-find connectors used in Part 15 hardware. It's a good one-stop store for the RF...
... Good find. That looks like the perfect setup for a long distance, reliable data link. I'm also working on a low-speed data radio using the Maxim MAX2754...
From the land of fruits, nuts and flakes comes the latest. I didn't make it to this talk due to a prior commitment.. "100,000 Foot Wireless Repeater Network" ...
the tools on gbppr are fantastic but I would like to browse around the maps. I found some older DEM viewers but nothing that compiles easily on Mandrake 9.1. ...
tarvid
tarvid@...
Apr 27, 2003 9:09 am
656
... These are a few I know of, all work under Linux: SPLAT! - designed especially for radio work http://www.qsl.net/kd2bd/splat.html DEM tools: ...
i had 4 aa battries in my pocket i put my keys in the same pocket. a little later my leg got uncomfortable, about 5 seconds later i had to empty my pocket. one...
... OK, It was wireless right? ... I have a REAL QUESTION for all ye who care. I am getting my feet wet with a real 5.2 mile link, or at least proposing it and...
Hi All, I have a very old IBM wireless LAN) that a want to see working, but the problem is that all the drivers i have are of OS/2 2.1 and Win 3.1. This is not...
... Do you have an exact model number or better hardware desscription? If they are related to the old NCR WaveLAN series, the old full-length ISA cards, they...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
