Hi there folks ... just came back from oshkosh and it was great seeing lots of lancairs and their owners out there. Something came up in my discussion with a...
Generally we dont use West Systems for structual items. I think using it for flox and micro is ok. Its is really nice with micro for sanding. I think you...
Glen, This rib goes at BL 57 and keeps the fuel pick up "wet" during an uncoordinated turn or turbulence when the fuel levels are low. Will ... From:...
Anthony when I was at the factory they stressed that only Jeffco and Hysol be used on anything structural. You can buy Jeffco products from Aircraft Spruce....
I hope you have solved this problem by now. I had a similar problem (you can probably find the string on this board a few years back). Turn out after much...
People: Have opportunity to replace TCM TSIO 550e cylinders with either TCM stock or ECI equivalants on rebuild process of engine. Would very much appreciate...
Sorry I don't have any info on which would be the best. However I do have a question if you don't mind. How much time on the engine when you discovered the...
I got to attach the right outer wing to the stub today.. as per page 3- 19 under point33 (the NOTE). Well it looks like the previous owner went too far with...
just a little carefull sanding until you get to the spar surface should do it. I wouldn't use a grinder. Too risky. Or you could put a little heat on those...
Zero. Not a found problem. It's a complete engine rebuild by very reputable shop which included supply of new cylinders of my choice.......either TCM originals...
Friends. I own a Lancair IV , 1050 hs. total time . From the beginning Cyl. head temperatures were hard to manage when climbing in hot weather, full tanks and...
Alex: Thank you very much for sharing your experience with me. It appears that your mechanical issues with the cylinders are random rather than anything else...
Ok, I'm a 320 buyer, not a builder. I purchased a pump used, but it was slightly different from the one I originally had in that it came without the pressure...
Bill, What is the part number on the label of the pump? You may have the wrong configuration. The part number identifies the internals of the pump. It...
Fellers---- I'm an EAA TC/FA in SW Ga (have worked on Veri's, Long's, Cozy and built a Europa, plus lots of non-composite stuff)---a buddy of mine just...
Hi Marl, Bring it home and start building. I got mine in about the same condition and finnished it in 20 months. Thats 20 months of that fiberglass itch ...
Congratulations on your Grand Champion Award!! I didn't make it to OSK this year . Do you have any pictures posted? Dan DeNeal Building 320/360 ... From:...
Chris, There was no part number on the pump, only a label "Model 108" (which I knew). However, I have determined (by pulling the cap nuts off the shuttle valve...
Bill, You have to go through a Parker distributor to get parts. You can probably find one cloe to you through the Parker website. To remove the spool...
Marl, I'm a two-time buyer, not a builder, but have re-done panels and poked around a bit. Here are a few personal OPINIONS of what you might do today that...
The regular size odyssey battery should fit behind the firewall somewhere. I have the smaller one for the dual LSE ignition but a friend just put his up...
Hi Dan, I do have some of the airplane posted but I have not posted any from Oshkosh yet. Craig From: lancair@yahoogroups.com [mailto:lancair@yahoogroups.com]...
Craig, Tony from Montreal ... we met at osh this year... I was the stalker with the camera lol .... GRAND CHAMPION ..... Fantastic!! Congratulations!! -Tony ...
Gentlemen, It is time for me to purchase Insurance as I am ready for first flight. I am being pointed towards AIG, however due to only 450 hrs this is going to...
Hey Bobby, I am currently going through a broker called AUA http://www.auaonline.com/ in Greensboro, NC. My latest policy for my 360 is trough them and the...
I know several Lancair pilots who use Skysmith, myself included. Very good rates through AIG and good service. _www.skysmith.com_ (http://www.skysmith.com) ...
Thanks Mike, I got my quote from Skysmith. It looks as though I will still not beat their quote, but I will have to insure for about ˝ of what I got in it,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
