Ok, Now I finally got everything to trigger properly and I can get power out
using the "tune" button, so I know that the softrock is working properly. The
difficulty is that I am not able to get the software to produce CW using the
key. I have the key configured so that it connects CTS and RTS when pressed.
This will switch the SR into Transmit, but does not produce a tone. I am
operating 12 KHz away from the center Frequency (7042.5 KHz with a center of
7056 KHz). As indicated above if I press the tune button, then it does produce
a tone and power out.

I suspect that I have something set wrong in the software so that it is not
producing a tone when pressed. I have the side-tone set to 600Hz and am using
CWL.

Any assistance would be appreciated.

Thanks,
AF4PM