Hello (again) - I've noticed one of my Digitrax DH121 decoders (age unknown) has version=46 I'm assuming that I can just edit the *xml files and change the...
Bill, Try the Lenz US site http://www.lenz.com/manuals/index.htm It lists at least 3 versions of the LE103 Bruce Norton ... From: billhoye Is there a decoder...
Jon, The associated XML file may be edited directly. I'd like to add this information to our decoder database but wish to confirm with you that the value...
Bill, As Bruce points out, there are three variations of this decoder. Two of which include "XF" in the suffix of the model number and one which does not....
... It would be tough to get that 100% reliable. And if it's only 95% reliable, people will come to depend on the reminder, and then one of the 5% cases will...
... Thanks! That's useful to know. Are there any differences with the previous ones that you're aware of? If so, we'll have to set up a new "family" of...
Hello Bob As far as I know the new TCS T-1 includes decoder lock, programmable pulse and optional full range or part range "dither". All three are (early 2004)...
Hi: I am admittedly new to decoder pro but I have got it up and running on my laptop. I did a club members Trix big boy which is equipped with the NCE and a...
Hi Tim, Welcome to the fun of this adventure. Your problem is pretty basic. DecoderPro can only work on one decoder at a time. I have a couple of the...
In the DP manual in the "lights" section there are several terms with which I am unfamiliar and need help with their meaning: "Forward light FOF effect...
Lets see if I can clear some of this up for you. First, you are only able to program a single decoder, so all of the items apply to a single engine. There may...
... Here is what I found: Old T1 = 1.3amp, 2.0amp peak, 120ma function outputs New T1 = 1.3amp, 2.0amp peak, 100ma function outputs The following are features...
Thanks for looking that up. It seems there's good news and bad news. The good news is that we can tell "old" and "new" T1 decoders apart via CV7. The bad...
... Hi Bob - What about just doing something like: T1 V.a T1 V.b etc... Where {a} and {b} were the minimum version numbers? So this new T1 decoder would be...
I like Jon's suggestion better than my idea which was going to be "T1-27" Rich ... From: "Jon Miner" <cp_n18@...> To: <jmriusers@yahoogroups.com> Sent:...
... "T1" "T2 judgement day" ? Oh wait, you said BETTER ideas... How about T1 and T1a or "T1 <v27" and "T1 v27+" Maybe there needs to be some thought on how to...
Actually this condition will exist for all TCS decoders. Each time the software is changed they just roll the version number. This is fine but if you had a...
... Why do we need to expose the different definitions for the various versions of a decoder? If the change is "upwardly compatible", then is it possible to...
... Then prototype operation and/or modeler's license determines which end of the engine the headlight is located on, and, once so declared, the headlight is...
Okay Rick, I'm not going to repeat the whole previous posts but lets continue. ... From: Rick Daniels [mailto:soupac2004@...] Sent: Tuesday, May 04, 2004...
Hi: I've had good success using Decoder Pro and my laptop to read CV's from my BLI 4-4-4-4 T1. My problem is the loco speed on my passenger layout is too ...
using V1.4.2 I can write changes to this sheet, write changes to all sheets, but when I write all sheets, the loco address reverts back to the short address...
Thanks Harry for your help. I was indeed programming on the main, which is why I was getting the immediate response to clicking on a "write" button. And that's...
... Could you try something for me? 1) Set it all up as you did above. 2) Check the "Basic" tab to make sure that long address is selected 3) "Write all...
... programming track for an address change.< This is from my dim memory but if _programming an address_ on the main I think it's correct for the address to...
