Hi Dick, OK. I found something on the net suggesting that the FTDI driver is installed by both OS X 10.5 and 10.6, but I'm not convinced it's using an up to...
Frank, This is the relevant bit in the log ... JMRI is sending a request for the PowerCab to identify itself and is not getting a reply. It then keeps...
... Could describe this in a little more detail? I'm not sure what you mean by "two entries". ... I don't really see what you mean by this either. Do you...
Hello fellow JMRI users, I recently found my Locobuffer-USB again and thought I'd give it a try on my new computer. Thing is that I seem to have lost my copy...
Hi Phil: I also have and still use on my train room XP computer one of the kit type Locobuffers, still works great & never had any problems with it.. I use...
Miles, You may download the drivers from RR_CirKits web site: http://rr-cirkits.com/ HTH Ross _____ From: jmriusers@yahoogroups.com...
49974
timandjan@...
Jan 1, 2010 2:06 pm
Hi Bob: Thanks very much for your reply. I will try to clarify. Each wire from the Kato switch connects to a port on the YardMaster. My first switch as an...
Hi Bill: Is your PR3 a serial version or a USB? I have a USB version running under Windows7 as my PC has no serial ports. I had some trouble getting the...
Tim; Different Bob here (Bob C). First of all welcome to the world of JMRI. Its a great group. I actually wrote the support code for CTI (Acela). Could you...
49979
timandjan@...
Jan 1, 2010 3:27 pm
Hi Bob: Further to my previous note describing how the YardMaster is configured and how the Acela module interfaces it to JMRI, I think there is a hardware...
Hi all and Happy New Year. Can anyone tell me how you can change the background color in the subject area. Black steam locos don't show up very well on a...
Tim; This is how some others have done this. You end up with a two-step process. You 'connect' each turnout to an output of the YM (other than the first one)....
The programmer is USB, and the soundloader says it can not communicate with programmer. ... From: timandjan@... <timandjan@...> Subject:...
49986
timandjan@...
Jan 1, 2010 4:38 pm
Hi Bob: Thanks very much for your help. Just so I am clear. When you say to connect each turnout do you mean both wires from each turnout to subsequent...
Graeme, As long as your OSX version includes an FTDI driver from the last few years it should be fine. As long as it is there it does not matter if it is the...
Bob, Is there a manual for PanelPro? Richard From: jmriusers@yahoogroups.com [mailto:jmriusers@yahoogroups.com] On Behalf Of Bob Jacobsen Sent: Thursday,...
I'm continuing to refine my Quaker Valley CTC panel. I want to blank out the lamp position on a few signal lever plates. For example I need a lever position...
Tim; And now I am confused :). What I just described works (and I have tested it and others are using it) for a Switchman. But (a) I basically described it...
... Starting with basics... 1) has this PR3 been known to work on other operating systems or other computers ? If yes, then the problem is likely to be...
... If SoundLoader (the Digitrax Windows-only program) can't communicate with the PR3, your best bet is to talk to Digitrax directly. It could be a hardware...
I'm having a problem accessing three panels i've created in Layout Editor. Each time I try to open one of the panels PanelPro opens each of the three panels...
Would it be useful to put some of this info on the JMRI Acela page? <http://jmri.sourceforge.net/help/en/html/hardware/acela/index.shtml> Bob ... -- Bob...
Gary, This a common problem that keeps on cropping up in the forum. If you search the forum you will find many references to the problem that will help you...
... Sounds like we need a "button" icon. Would a set of buttons from this <http://jmri.org/resources/icons/USSpanels/Panels/USS-15.gif> be about the right...
