Would someone guide me in the proceedure of setting up a consist using DecoderPro and a Digitrax DB150? Is it just a matter of putting the same number in the...
... Using which method, the consisting tool, or on the programming track? If using the consisting tool, which version? ... This sounds like you're doing this...
... This might be a clue as to how to get past the error: Add some load to the outputs, perhaps with a resistor, or a small light bulb or whatever. ... This...
Programming track? As I said, I'm using a Digitrax DB150 And it doesn't use a separate "programming track". All programming is done on the main although OPS...
Can someone please e-mail me a couple of the US&S switch panel plates from the current devel version? The machine I have JMRI installed on doesn't have...
Again, thanks to all who pointed out the workaround for the bug in the current devel version that was preventing me from adding sensors. I've got them all...
... Ok, replace where I said programming track with "Service Mode" then :D. (I'm not a Digitrax user, sometimes I forget what each Digitrax Command Station can...
... The most recent versions of icons, etc, are usually available at: <http://jmri.sourceforge.net/resources/> I think the ones you're looking for are in ...
Thanks Paul. I have it working well now. Pretty easy when you use 2 digit addressing. <VBG> Ken ... From: paul.bender@... To: jmriusers@yahoogroups.com ...
First, I want to thank everyone on this list and those who have been developing DecoderPro for the great unwashed masses like myself who have _zero_ experience...
By consisting I am assuming you want to mu your locos. Personally, I'd suggest doing this with the throttle functions MU (+/-). Using the DB150 and ...
Bob, The Decoder is connected to diode head lights - but I would be fairly sure that they don't draw anywhere near enough to register at the SPROG. Is there...
Hi, I'm a new JMRI user, but I have a question about the Fast Clock support in JMRI 1.5.6. Is there a way in the Fast Clock Setup tool to have the time source...
There are two ways to access info in PanelPro: via tables, or by entering a name in a text field. Turnouts, Sensors and SignalHeads are accessed directly from...
Jim, ... What you actually describe is NOT what is generally referred to as "Basic Consisting". Let me give you the background information, you need to see...
It sounds like you've hit a bug. I don't have one of the LRT clocks to test with, so I can't recreate this exactly. I'd be happy to look into it if you'll...
Jerry, Finally hooking JMRI Panel Pro up to the real thing ... Jeff Warner and I discovered a bug with the NCE SwitchIt. Rev A. When you use a throttle to...
Thanks Jim. I have successfully MU'd 2 locos using DecoderPro after finding out that 2 digit addressing must be used. (Can't use 4 digit) Very easy to do. Ken ...
... Thanks, Nick, but someone gave me this fix a few days ago. If you reprogram using the computer, is there any reason to worry about getting the SwitchIt's...
You're welcome Jerry, ... I'm a little behind in my emails after the Cornwall's "last" op session this Saturday. I'm glad that you got it solved. ... Not in my...
Bob, Thanks for the quick response. I'll get a log file for you tonight and send it off list. I'll be glad to run any other tests you need. Thanks, Bruce -- ...
... Paul: What an excellent explantion of consisting for DCC. I actually use command station consisting and decoder consisting combined. This allows me to make...
I had hoped to get it right by not looking at my notes or going out and looking at my programming system. I goofed in referring to Basic Consistning, and...
... <rstern1@c...> wrote: (snip) ... RSD15(snip) I understand I can't program individual sounds ... index, (snip) In the files are(on the left of this screen)...
... My personal reaction is that it just lowers the priority of getting the new code into them. You can bet your bottom dollar that in a couple of years you ...
Alright, this is one of those "I'm an idiot!" threads... and I share it so you can all have a chuckle at my expense. In recent days I noted that, while...
... Thanks for that Jerry. Here I was thinking that I'm the only one that ever did that. As that great philosopher Homer would say "Doh!" Andrew Send instant...
I have done similar but my best was Swearing at the hot soldering iron while I had the phone on speaker. Lucky my sister is an understanding lass who only ...
Hi Niklas, ... The code for JMRI has been written, but it has yet to be officially released to the public (that will be in version 1.5.7). If you'd like a copy...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
