Where do people put them? I have one now where my starboard 50 gal water tank was installed by the first owner. I would like to put the water tank back and...
Here's one solution, from the J/42 "Crisis Mode," now in South Africa: http://web.me.com/crisismode/Site/The_States/Entries/2007/12/3_False_Report.html He...
I installed a Spectra watermaker below the v berths in the bow- aft of the holding tank. I purchased the system without the mounting broad so that I could...
I took this approach myself with a Village Marine unit. See attached photo. Worked well, except that the intake would vent in rough seas, so I added a air...
Our J42 #33 currently has a fixed 3 blade prop. I'm considering replacing with a folding or feathering. Looking at all the popular models. We'll be racing in...
Original Max Prop still works well on our 22 year old J40. It drives the boat to hull speed, reverses well and feathers every time. What more can you ask? ...
I've got my old Martec folding prop sitting in my basement that you're welcome to for the price of postage. But, let me warn you, there's a reason why I...
I guess I am the only one without a MaxProp. We replaced our Martec with a Flexofold 2 blade geared folder and it has been fine for 30,000 miles and two...
Hi Scott: We have a Flexofold and it has worked very well for years. The boat originally came with a Martec which I still have - but I would not recommend. ...
All, Thanks for the great feedback! Sounds like Martec isn't going to be on the short list! Even if it was only the cost of postage!! We have a boat show...
As long as you're looking at all options check out the Gori folding 2-blade. Keep the Martec ONLY for back-up. Newt Newton PS Merrill nmerr10001@... ...
All, Your feedback was great and I've done my own additoinal review and decided on the Max Prop. I chose the Max Prop mostly because I wanted a feathering...
An 18" 3-blade VP prop is exactly the one I got, except we pitched it to 20" (which, with the VP, is trivial to change). I have the exact same engine. You'll...
We have installed an 18" 3-blade Max Prop Classic on "Sandpiper." We tried pitching at 20 degrees (X=K, Y=E) the first year. We have the 3JH2TE. The engine...
I too have experienced a lot of soot on the transom and I am sure it has nothing to do with the prop. I found fuel in Europe is much cleaner and thus little...
Has anyone set up twingers, particularly on a J-42? We are kicking around a few ideas on how to set them up and are interested in what has or hasn't worked on...
OK, I'll bite. What is a twinger???? When I Googled twinger and boat, what came up was links to "swinger boat", which seemed like fun, but I suspect is not...
Twing lines = tweakers We had these on our Laser 28. They are control lines that cinch the spinnaker guy down to the deck around the shrouds. This improves...
Jennifer: No I am not saying they won't work on the J/42 but the loads are considerably higher on a 20k pound boat. On our J/42 we use double-sheets and guys...
Ah yes...it does that on our boat too. Of course you don't want to choke the sheet down too much with a twing so we just live with it. I have had the boom...
thanks Bernie, we are not sure what to do--for our regular racing it is fine but we are going to Hawaii next summer in the Pac Cup and having the sheet chafing...
Jennifer We have the chafe problem as well on bottom of boom and it really is not that big a problem as the sheet is always moving a little so it doesn't rub...
Installed them on a Frac Rig X119 with relatively small for triangle. Used a double block for the sheet end so we could double purchase from the rail. The...
