Recently, I've been having some problems with the diesel in my J/42 stalling in rough seas, particularly when the tank is only partially full. The problem is...
Recently, I've been having some problems with the diesel in my J/42 stalling in rough seas, particularly when the tank is only partially full. The problem is...
Tom, As you know I just put a new aluminum fuel tank in my J/42, KITTIWAKE. I had the new tank fabricated by Coastline Equipment in Bellingham, WA, 360...
Hello, Ivan! I didn't have any problems with my tank either while I was in the Puget Sound region. The problems have all been offshore. For example, last week...
Hi folks: I can happily report that I have not had the symptoms of the engine cutting out that some are talking about. We have owned the boat 7 years and have...
We have never experienced any engine problems in 30,000 miles of ocean sailing with Jaywalker. Some of it as you can imagine has been under gale conditions in...
In thinking about your problem, I wonder, do you have to bleed the engine after it cuts out. If you do, it is sucking air. If you don't it is being starved...
... I have not had to bleed the engine to get it restarted (hence my theory that fuel starvation is causing the problem). As a double check, today I attached a...
The other thing you may want to check is the bottom end of the fuel pickup. Mine was flat and close to the bottom of the tank and would easily get blocked. A...
Will do. My pickup tube has a screen at the end. I've checked it and it's clear, but I'm suspecting there is a partial blockage somewhere along the way,...
I just had the fiberglass/gel coat stops at the aft end of the sliders for my cabin hatch bust off on both sides in big chunks - one side probably as big as 1...
Hi Bob: It was a pleasure to meet you in Bermuda! And yes indeed it was a rough trip back from Bermuda for us too....at least the wind was on the quarter ... ...
-One of my particular irritants! On FINESSE--Hull #20--I have had one side (port) reglassed, faired in with gel coat, rubber bumpers installed, at least six...
Because of all the warnings about hatch/stop problems, I've been very careful and not had any problems. One solutions is to take the hood off that covers the...
I will be out of the office starting 08/11/2008 and will not return until 08/26/2008. If your matter is urgent please contact Desiree Tinsley on extension...
You could try TPI Composites and confirm with them 401-247-1050. Bernie Bernie Coyne, Market Manager, Rational Team Concert product IBM Rational software,...
Thanks ________________________________ From: j4x-owners-group@yahoogroups.com To: j4x-owners-group@yahoogroups.com Sent: Sat Aug 23 10:22:07 2008 Subject: Re:...
This summer I had a total blockage at the screen on the pickup tube (which killed the engine until I switched to the reserve tank). The boatyard service...
Interesting---Is there a "right or wrong" regarding having a screen on the fuel pickup?? We encountered the clogged screen problem for the 1st time this year...
This spring I had a new tank made by RDS in Florida 850-584-6898. Not sure if it had a filter on the pickup tube but I didn't see one. One could call them...
As many of you know, a problem area for the J/42 (and, I guess the nearly identical J/40) is a failing starboard fuel tank. Water gets under the tank, causing...
More fun with petroleum products! Like Ivan, I found a completely amateurish installation of the access plate on the main fuel tank, so I cut a new one. ...
Has anyone ever taken out the factory installed microwave, and if so, how do you access the screws that are securing it in place? We cannot figure out how the...
So our situation is that the yard has determined (with the stick in) that the rod rigging needs to be replaced. They want to take the stick out and we are not...
