I have a e80 system and would like to know what the amp hour consumtion is on one monitor. Also use the ST60 multi displays. Has anyone documented amp hour...
All is solved with a new magnetic switch (solenoid) and a starting relay. I busted up the old magnetic switch to see what is sealed inside. One of the two...
Indeed! As luck would have it, last week my engine refused to start with exactly the symptoms that Bill described. Now I know exactly where to look! -tk...
Thanks Conrad _____ From: j4x-owners-group@yahoogroups.com [mailto:j4x-owners-group@yahoogroups.com] On Behalf Of Scott & Kim Dickinson Sent: Sunday, July 10,...
Portable running lights... what do you use for running lights if your fixed lights fail and you need to use lights for a couple of nights. Conrad Another J #...
We have developed a table with electric usage by every item on board including individual Raymarine instruments. However; it is on board and I will not have...
Great... thanks for the help.. Conrad Another J _____ From: j4x-owners-group@yahoogroups.com [mailto:j4x-owners-group@yahoogroups.com] On Behalf Of Newt...
Need help with an overheating problem. We are on a cruise, overheated - no sea water flow out the transome. This occurred while at low RPM with the Sea Frost...
436
Robert Thuss
Robert.Thuss@...
Jul 13, 2011 3:50 pm
Tony - you might try replacing the impeller and cover seal, it sounds like your water flow is low - Robert From: j4x-owners-group@yahoogroups.com...
We once had an overheating problem that defied all understanding. Still had flow out the stern exhaust but not enough. Turned out that diesel fuel had leaked...
Tony, It sound like the impeller is not functioning properly. If the impeller is doing its job both the sea strainer and Sea Frost condenser should be full of...
In addition to the good suggestion s you've had here I would also check for an air leak in the condensor. It would explain the low water level. In particular...
Look for the entrance of tiny air bubbles at any fitting. The zinc fitting would be a good place to check. If you can somehow pressurize the suspect stretch...
It is probably the impeller. Look for a vigorous flow of water out of the exhaust. If it is wimpy and there are no obvious leaks then it is probably the water...
Thank you all !!! I went the impeller route, but it looked good. I also took off hoses to look for clogs. Got some water flow out back but it was weak. So I...
I recently changed mine. I bought a 100 pack of the needed o-rings (Dash #223) from McMasters (part #9452K61 <http://www.mcmaster.com/#9452k61> ) because it...
That is very kind of you. My address is William Stellin 2495 Cascade Springs Drive Grand Rapids, MI 49546 Thanks Bill Stellin. Jaywalker Sent from my iPod...
Tom, Send me your address and I will send you a postage paid envelope. My address is: Jeff & Susan Russo 4189 52nd Ave South St. Petersburg, FL 33711 Here are...
Hi Tom: That is very good of you. Thank you!! Please send them to: Bernie Coyne 89 Seaview Ave. Marblehead, MA 01945 Many thanks!! Bernie Bernie Coyne Market...
We are looking to purchase a new (to us) boat and the J/42 is in the mix. Is there anything specifically I should look at or have a surveyor look at? I know...
452
Robert Thuss
Robert.Thuss@...
Jul 27, 2011 2:34 pm
Do you have a particular one that you are considering? If not, mine is for sale and she is the least expensive one on the market, now that Dolphin (very...
Robert, I have looked at yours online. Looks to be in great shape and with great equipment. I remember watching you sail by us in one of the NBR races. Most...
Hi, Barry It would be great to see you in the ranks of J/42 owners! The J/42s are basically very well build boats but, like any boats, they have their weak...
Tom, Great info. Thanks. Barry From: j4x-owners-group@yahoogroups.com [mailto:j4x-owners-group@yahoogroups.com] On Behalf Of Tom Keffer Sent: Wednesday, July...
