Com2 I think, it can be set in the BIOS. There is a 10 pin header on the motherboard as a second serial port. Dave...
830
ve7ltd
May 18, 2008 8:14 pm
The log problem is likely that your node ran for that long before being reset. If the node is reset without running a flash_sync, it will do that. The log...
829
Craig
craiginhouston
May 18, 2008 8:11 pm
... I also noticed in the motherboard manufacturer's info it says: "Back panel I/O - 1 serial port" "Onboard I/O connectors - one serial port connector for a...
828
nospamk7iou
May 18, 2008 8:05 pm
I checked my log today and noticed it was there for Jan, Feb, March with no April and May 18th only as I rebooted the node. Anyone else experence this? Also...
827
Craig
craiginhouston
May 18, 2008 7:39 pm
... I forgot for a moment that the embedded node has a keyboard, mouse and VGA port. I actually haven't used the serial port for the console. This brings up...
826
Nate Duehr
wy0x
May 18, 2008 6:19 pm
... Mucho excelente, Senor! :-) Heh heh... having fun with D-STAR here, got an ID-800H... running this thing through the front-panel is a pain in the ass, but...
825
Mike Mullarkey
k7pfj
May 18, 2008 6:16 pm
Hi Dave, Thanks again for the help. I am slowly learning all the things that need to be rest etc. Mike Mullarkey (K7PFJ) 6886 Sage Ave Firestone, CO 80504 ...
824
dcameron@...
ve7ltd
May 18, 2008 5:46 pm
All I did was log in and reset the tbd process. Dave ... David Cameron - VE7LTD IRLP System Designer - http://www.irlp.net ... From: "Mike Mullarkey"...
823
Keith VE7GDH
ve7gdh
May 18, 2008 2:25 pm
Craig WD5BDX wrote... ... The best place to place "add-ons" would be in /home/irlp/custom. ... It is? As far as I know, the serial port isn't being used. ... ...
822
Mike Mullarkey
k7pfj
May 18, 2008 1:30 pm
Hi Nate, No his is the normal node, just a computer. The Echolink is working now. I think David logged in and made some changes. All is working great. Mike...
821
Nate Duehr
wy0x
May 18, 2008 6:24 am
... Is his an embedded node too? Remember, they run from RAM disk and you have to issue the command to write the RAM disk to flash or they come back with...
820
Mike Mullarkey
k7pfj
May 17, 2008 3:42 pm
HI David, The fix for the DTMF works great but K7UND's node will not keep the settings if the node happins to reboot for some reason. I am trying to figure out...
819
Craig
craiginhouston
May 17, 2008 4:10 am
Here is the current status of my little project. I downloaded to my windows xp machine the "spu.tar.gz" file from www.coaa.co.uk Then I copied it over to the...
818
Craig
craiginhouston
May 17, 2008 12:08 am
... Hi Nate. I thought that package was for only reporting the status of your IRLP node and not for collecting APRS data from a TNC via the serial port on the...
817
Randy Hammock
kc6hur
May 16, 2008 11:46 pm
... The new system no longer uses perl so should work on embedded nodes. We were experimenting with embedded nodes a while back, but don't recall if it worked....
816
Nate Duehr
wy0x
May 16, 2008 11:00 pm
... There's a package for "normal" IRLP nodes that sends APRS "connected/disconnected" messages to the APRS servers, but two things: 1. I don't know if it will...
815
Craig
craiginhouston
May 16, 2008 10:36 pm
In addition to standard IRLP functions, I am interested in having my embedded controller route APRS data and AIS data to servers on the internet (Igates)....
814
Chris Underwood
cunderwood2800
May 15, 2008 9:12 pm
YEA!!!!!! That did it Dave! Now, there is an unkey before a re-key and now the DTMF is working GREAT! Thank you so much for your attention to this. Chris...
813
Chris Underwood
cunderwood2800
May 15, 2008 9:12 pm
BCC'd Steve @ Link Communications Hello Everyone, Mike and I have been doing a BUNCH of testing and we have it narrowed down to this as our issue. The first...
812
Mike Mullarkey
k7pfj
May 15, 2008 8:36 pm
HI David, I just spoke with Chris K7UND in Oregon and he is resetting his node. I belive the problem is with his side since he can control my embedded node ...
811
David Cameron (IRLP)
ve7ltd
May 15, 2008 8:31 pm
A 2 second delay was added earlier today. Perform a update files or reset your nodes, and try the system again. Dave Cameron VE7LTD...
810
Nate Duehr
wy0x
May 15, 2008 12:42 am
... The DTMF_REGEN dtmf comes out at "100%" I think by default, or it's settable somewhere... Dave may have added that later on, I can't remember... 50% of...
809
Mike Mullarkey
k7pfj
May 15, 2008 12:06 am
Hi David, I think that if the audio is lowered the DTMF will work but the voice audio cant be herd. I have my embedded node hooked to my RLC-4controller with...
808
Nate Duehr
wy0x
May 14, 2008 8:53 pm
... Hmm.... if it's there, I've never heard it, but I wasn't listening all that closely either. :-) That would "fix" it, just fine. Cool. -- Nate Duehr, WY0X...
807
David Cameron (IRLP)
ve7ltd
May 14, 2008 8:17 pm
Actually, there is (or should be) and unkey between the initial send and the regen. If not, you can always add delay into the dtmfregen script. Dave Cameron ...
806
Randy Hammock
kc6hur
May 13, 2008 7:02 am
... When configured for _FD operation, I recall there being a way to disable regeneration and allow DTMF pass-through if both nodes agreed on the method. I...
805
Nate Duehr
wy0x
May 13, 2008 6:35 am
... Hi Mike, DTMF_REGENERATION=YES in the /home/irlp/custom/environment file (default it's set to no) on the remote IRLP node will cause IRLP to regenerate any...
804
Mike Mullarkey
k7pfj
May 13, 2008 3:40 am
Is there a way to allow the DTMF to pass through the to another node to control another part of a system. Is there a special script that will make this work. ...
803
ve7ltd
May 9, 2008 9:48 pm
Jason, Your node is behind a router, and that router has port forwarding information set in it to allow your node to work behind it. What has likely happened...
802
vk4mih
May 9, 2008 9:48 pm
I have a fault with our node 6464 we can dial into other nodes and they can here us but we can not here them, we also get the anoucment on our end when the...
