I have two emedded nodes. One has voice_id and time announcemnts in the crontbs and correctly transmits these when the node is idle or busy. The other used to...
767
Keith VE7GDH
ve7gdh
Mar 10, 2008 1:12 am
Mike VE6XUK/VA6XG wrote... ... If you run "crontab -l" it should list what is in crontab. If you have run them from the command line and they don't produce the...
768
David Ward
quintedave
Mar 10, 2008 3:25 am
We see ipupdate messages frequently as per the examples below. Can some explain what is happening when these messages occur? Is this something to be concerned...
769
Keith VE7GDH
ve7gdh
Mar 10, 2008 5:05 am
Dave VE3BIP wrote... ... server 209.160.72.104. Cant obtain current IP ... That's an odd node callsign for 2106... ...
770
va6xg
Mar 10, 2008 5:13 am
... have ... down ... don't ... works... ... Same ... would ... Thanks, Keith. 'playwav' runs normally and I can fix my problem by inserting -key -unkey...
771
David Cameron (IRLP)
ve7ltd
Mar 10, 2008 4:30 pm
In this case, you should use aux1on and aux1off to key the radio. This is suggested in the manual, and requires that PIN 2 and PIN 3 on the DB-9 be bridged....
772
va6xg
Mar 10, 2008 8:04 pm
... This ... through ... Thanks, Dave. I had completely forgotten that I had switched radios when my trusty Motorola gave out. And of course I switched cables...
773
Aubrey
ajmays45
Mar 11, 2008 12:51 am
I moved 4644/WA5YXW from my home qth in Texas where i did all the set up to Southbury Ct. I used the same modem/router and ATT as provider. I need to get into...
774
David Cameron (IRLP)
ve7ltd
Mar 11, 2008 4:02 pm
You seem to have two problems here: 1) The node has changed internal IP addresses, and you can't get in via SSH. This is where you have to use the console, and...
775
A J Mays
ajmays45
Mar 11, 2008 7:26 pm
David I was afraid of that I will not be back in Ct until summer and there is no way my Dad can do this. Do not know anyone close to help out. Will just have...
776
David Cameron (IRLP)
ve7ltd
Mar 11, 2008 7:47 pm
If you can get in remotely, we can change it remotely. Dave...
777
A J Mays
ajmays45
Mar 12, 2008 1:43 am
Do Not know how I am dump to this stuff David . A.J. "David Cameron (IRLP)" <dcameron@...> wrote: If you can get in remotely, we can change it...
778
James Hall
wh7coldduck
Mar 13, 2008 8:25 pm
Node 3024 has an embedded IRLP. It appears we have a different activity timeout for the IRLP and Echolink connections. The IRLP is approximately an hour and...
779
James Hall
wh7coldduck
Mar 13, 2008 9:24 pm
... wrote: Further invstigation found the "hour" irlp activity timeout was the reflector timeout so I understand the difference of the 2 timeouts, reflector...
780
James Hall
wh7coldduck
Mar 13, 2008 11:03 pm
... wrote:I modified the value in home/irlp/custom/timeoutvalue to 1200, flash_snyc, but the echolink timeout still is around 300. Looked for ...
781
gauthier_jacques
gauthier_jac...
Mar 17, 2008 11:10 pm
To whomever the node owner of 5821 is ... it appears your having difficulties with audio. You tried connecting to node 2266 twice today without audio. If you...
782
Nate Duehr
wy0x
Mar 17, 2008 11:14 pm
... Is 5821 an embedded node? If not... you won't find them here on this list... Try irlp@yahoogroups.com instead. Nate WY0X...
783
Nate Duehr
wy0x
Mar 17, 2008 11:26 pm
... p.s. Even better, go to http://status.irlp.net, click on "All IRLP nodes", search for the node number, and click on it to get to the detail page, and then...
784
Aubrey
ajmays45
Mar 18, 2008 7:25 pm
David: I have been out of town. I can get in to 4644 with the password and username you reset it to. I have no idea how to get in remotely to aumix. Thanks...
785
gauthier_jacques
gauthier_jac...
Mar 18, 2008 8:05 pm
Hi Nate Duehr, Checked out the status page before posting ... the node has no info or contact info. But as of today it shows as being down. I just wanted to...
786
Nate Duehr
wy0x
Mar 18, 2008 8:15 pm
... Oh well. If they keep calling your end with no data listed, I'd block 'em locally. Yep, their info isn't up on the site... it makes the site totally ...
787
ve7ltd
Mar 20, 2008 8:40 pm
All, I have made some changes to the way the Embedded IRLP nodes are built. This is due to some new technology available, and some older things being...
788
ke9v@...
ke9v
Mar 21, 2008 1:07 am
I've been running an embedded node (4212) for over a year with no issues at all. I would completely forget it's even in the shack if not for the constant...
789
David Cameron (IRLP)
ve7ltd
Mar 21, 2008 1:11 am
Well try it, and see if it gets too hot. I run mine without. The case is not designed as a fanless case, but if its ventilation holes are not blocked, it...
790
James Hall
wh7coldduck
Mar 21, 2008 2:24 am
Our embedded node 3024 is up and operating fine. I am able to bring up puTTY and access the node, but only on a computer connected thru the same router as the...
791
David Cameron (IRLP)
ve7ltd
Mar 21, 2008 2:45 am
I can login fine remotely into your node. You have to remember to set the port to 15426 (from the default 22) in putty to login to an embedded IRLP node. Also,...
792
JIM and LYN HALL
wh7coldduck
Mar 21, 2008 4:03 am
OK, we had 15426, but I was using the ip off the router. Didn't know about the hostname. Thanks. Jim ... From: David Cameron (IRLP) To:...
793
David Cameron (IRLP)
ve7ltd
Mar 21, 2008 4:07 am
The IP off the router will only work inside the network. Dave Cameron...
794
Don
donmor46
Mar 21, 2008 2:59 pm
Adding a 100 ohm resistor runs the fan at about 40 - 60% of the speed and have had no ill effects. Don VE7EDA ... issues at...
795
Aubrey
ajmays45
Mar 23, 2008 12:34 am
David: Thanks for the info I got in fine and got the audio level set fine on machine 4644. Thanks once again for your help. Maybe I want have to bug you and...
