I am getting ready to hookup node 4960 to backup power and am wondering what the min and max voltages that the node will still operate, does any one know? ...
With the standard power board (not the $60 option), the node will operate +12V +-5% (11.4-12.6) only. With the option board, an input voltage of 5-26 volts is...
I did some experimentation and I found some interesting results on the heat generation and buildup in the standard cases I offer. Depending on if noise or...
Hello All, I recently got my embedded node working however when I connect to a reflector or other node it only reads back the standard "You are connected to...
Due to the limited storage space, the custom audio files are not stored on the machine. My intention was to have the custom audio files streamed from the...
Have you thought about letting endusers add an external memory stick (USB) with audio files or other information to the embedded node device? 73 & Thanks de...
The features to add that USB stick are already there. Please refer to the following message: http://groups.yahoo.com/group/irlp-embedded/message/115 If people...
Thanks for the information Dave. I just thought it might be an option after reading the original post. Keep up the great work! -- 73 & Thanks de Emit, W0UAW ...
You can always just add this snippet to the custom_off, right? I guess this should remove all of the audio files that start with stn in the audio directory......
No, that will not work. The way that the system works now is the first time you call a node, you get the "node number 1 0 0 0 , link on". I did not want to...
I finally got my embedded IRLP node up and running. It is at my house being burned in behind a router. I have one problem. I can not get nodes to come up using...
Can you check to make sure that the DTMF tones are not being muted by the controller? That is a commonly overlooked issue. Most controllers mute DTMF by...
Dave, Thanks for the suggestions. My embedded IRLP Node 3860 is now working great! The problem with the DTMF was simply a matter of finding the sweet spot to...
My node 4960 did not change with the time change last night so I manually changed the time and on the next time update it went back to the old time how do I...
Rich (N9GPY?) wrote... ... First I needed to update the timezone info on node 1147 (not embedded node) which is using FC 3. Mostly, I used a posting by Ted...
Hmmm, sorry but I never fully tested this... Eeek I am a bad designer. I will post updated timezone data files as quick as I can. I was pretty sure that the...
Dave VE7LTD wrote... ... Does this mean they are going to retract that Technical Excellence award at Dayton? hi www.arrl.org/news/stories/2007/03/09/101 All...
I wrote... ... I didn't even think of it before posting my earlier message, but the steps I outlined would only be appropriate for people in the Pacific time...
This is a yahoo group which you control the settings for. All of the unsubscribe information is in the footer of each message. You unsubscribe yourself. David...
... <---So true Mr. Dayton 2007! The info is in the header as well Ken (I don't personally run an imbedded node. I saw what imbedded reporters can do)...
... Thanks, Keith. Those files were the easy way to fix three of the six nodes I did this morning. Just copy it into /etc as filename localtime, and you're...
Gary AGØN wrote... ... No problem! Go ahead and post the files for others to use. I'll also leave them accessible on my site until some time after Dave has...
The DST fix is out. It is a simple script to do all the dirty work for you. One of the steps in the script runs the "timeconfig" program. The first question...
I did it on my FC 3 node and it worked just fine, did the date command afterward and it is exactly what it is supposed to be. 73 Jim wd0ekr Node 3081...
Dave VE7LTD wrote... ... Even though I manually patched my embedded node yesterday, I ran the fix-dst script. All went smoothly. I skipped rebooting afterwards...
Yes, but the kernel logger and some other processes need to be restarted to propoerly show the right date. Not required, but it doesnt hurt an embedded node to...
Did your node run the timeconfig script? I just logged into your node and ran the timeconfig program, and then it had the right time and date. Did your node...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
