I've had a strange problem where some echolink users can't head my node. They can connect and transmit but don't hear. I've been talking to Skip WB6YMH (tbd...
1256
David Cameron (IRLP)
ve7ltd
Jun 14, 2010 4:09 pm
You can build it under CentOS 4.8 and it should work on the embedded nodes (as a binary). I use a Slackware 10 build environment for most compiling for IRLP,...
1257
ve7ltd
Jun 21, 2010 11:05 pm
It seems that a recent update to the CentOS 5 kernel has solved the problems I was seeing with the parallel port processes taking up a lot of processor time....
1258
Keith VE7GDH
ve7gdh
Jun 22, 2010 2:29 am
Dave VE7LTD wrote... ... I'm only aware of one problem (maybe two) since I upgraded to the 2 GB flash drive / CentOS 5. The node stopped responding once a few...
1259
David Cameron
ve7ltd
Jun 22, 2010 2:36 am
Good point on the flash_sync thing. I was not thinking. Dave ... David Cameron - VE7LTD IRLP System Designer - http://www.irlp.net ... From: "Keith VE7GDH"...
1260
denniswj
Jun 27, 2010 4:34 am
To all Experts out there. I have a problem in which you maybe able to help. The following is what i get when trying to update files. I do not know if the files...
1261
David Cameron IRLP
ve7ltd
Jun 27, 2010 12:44 pm
What is happening is you have something placed into your "custom.crons" file that is corrupted. the custom.crons file is used as a scheduler. So I would have a...
1262
g8amd
g8amd...
Jul 13, 2010 10:00 pm
Is it possible to mount a USB memory stick on the current IRLP embedded controllers. This would a usefull way to transfer data and provide some additional...
1263
ve7ltd
Jul 13, 2010 10:10 pm
Yes, you can, but you have to manually load the modules for both the USB controller and the usb-storage: # Loads the CF card drivers insmod ehci-hcd insmod...
1264
KR6WP.ilrp
jsgroenke
Jul 14, 2010 5:44 pm
Dave have you considered offering the IRLP distro(s) as a bootable ISO on a USB thumbdrive type device? Jim G KR6WP...
1265
g8amd
g8amd...
Jul 14, 2010 8:03 pm
I have followed Dave's suggestions but as of now to no avail. Loading ehci-hcd causes a fatal kernel crash. After I took a look using LSMOD it appears that the...
1266
g8amd
g8amd...
Jul 19, 2010 6:07 pm
Here we go, bad practice, repling to my own message. I have come to the conclusion that really a Kernel upgrade is needed, maybe from 2.4 fo 2.6 + . that's a...
1267
douglas warren
kc8uzm
Jul 21, 2010 9:56 pm
yes you can ... From: g8amd <g8amd@...> Subject: [irlp-embedded] Re: Can I mount a USB storage device. To: irlp-embedded@yahoogroups.com Date:...
1268
ve7ltd
Jul 21, 2010 9:56 pm
Yes that is a major issue. The kernel that is running is chosen for a reason: to support the hardware available on the system with minimal overhead and space. ...
1269
ds00101
Jul 22, 2010 6:59 pm
All, When connecting to the test server, we have adjusted the audio settings to acceptable levels. When we listen to local users (radio to radio through the...
1270
David Cameron (IRLP)
ve7ltd
Jul 22, 2010 8:24 pm
Are you using the node as a repeater controller? In the setup document, the two levels are adjusted separately. Why are you not using pin9 of the IRLP DB9? It...
1271
ve7ltd
Jul 27, 2010 10:19 pm
On older nodes, the trick was to use rdate to sync the time with another computer. But most of the public time servers no longer accept requests using this...
1272
Donald Jacob
wb5eku
Jul 28, 2010 12:38 am
Thanks Dave.. Don WB5EKU...
1273
kc2rqr
Aug 17, 2010 8:16 pm
Hello to all IRLP Trekkie's, Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Node 8643 on line processing...
1274
ve7ltd
Aug 17, 2010 8:18 pm
Sorry for the 11 day delay in posting the last message. Not sure why the SPAM filter thinks a lot of messages to this group are junk. I also don't get any...
1275
ve7ltd
Aug 17, 2010 8:44 pm
Again, sorry for the delay. You should run the program ps ax when the machine does not seem to decode DTMF. Take note if there is a process called dtmf...
1276
kc2rqr
Aug 21, 2010 3:54 am
Thanks David                    Better late than never! FYI. The problem was attributed to the PC mother board bit the dust. ...
1277
r gilson
rgilson14215
Aug 26, 2010 5:28 pm
Hi to All:   Being a new member and a current owner of node 4491, which is used to link four  927 repeaters to the internet, I have decided to build a...
1278
Donald Jacob
wb5eku
Aug 26, 2010 5:41 pm
Ron, Instead of a USB stick, you might want to try a Compact Flash card and an IDE to CF adaptor. I have that running on my home node with mini-ITX board and...
1279
frankrh77
Aug 28, 2010 5:05 pm
... If your ISP access is DSL or Cable modem you might want to call their help desk and verify that your modem is correctly configured to get rid of the modem...
1280
r gilson
rgilson14215
Aug 28, 2010 5:05 pm
Don:        Many thanks for you idea. Where did you get the board and approx how $ did the board cost? I have most of the repeater done and hope to...
1281
Mike Morris
web_magician
Aug 30, 2010 5:36 am
<http://www.buyextras.com/syhiquidetoc1.html?gclid=CNG_y4m94KMCFQsTawodUH3I6A> BTW - I'd have both the CF-IDE adapter and the USB stick, - or at least a USB...
1282
Donald Jacob
wb5eku
Aug 30, 2010 6:12 am
Ron, I bought the IDE to CF at Fry's.. frys.com will get you there if you don't have one near you. They also have the CF cards and usually have them on sale.. ...
1283
Lil Twig
ckojeff
Sep 14, 2010 6:11 pm
Irlp embedded node c/w all cables for attachment to a motorola max trac 65w radio programmed and configured for irlp node. just plug in and away you go. ...
1284
k5mes
Sep 21, 2010 10:31 pm
I have a embedded irlp node #4273 that I got from VE7LTD. The time was correct on it but I had to send it back to dave for repairs and since I got it back, the...
