Yes, first suggestion, I figured it out last night, very stupid of me. Still can't figure out why the USB stoped working, but it is probably an XP problem. I...
David, Glad you got the serial problem figured out. We have a test PC with XP Service Pack 2 on it and the HomeVision-Pro USB stuff works fine on it. Thanks, ...
Craig, Thanks for all the help getting my HV unit back up and running, meant to let you know about a week ago everything was back up and running, but got...
David, I can’t explain it. We’ve been using SP2 here for over a year without problems. I can’t find anything in the Microsoft description of the XP SP2...
David, Hardware interfaces like USB don't degrade over time. If it worked for two months and then quit, you have a software problem. Either your drivers got...
Steve, Disclaimer: I don't use YAC and I don't have the PRONET interface. But if I'm not mistaken the PRONET interface is actually a Lantronix CoBox-Micro or...
Hi, Recently entered the world of home automation.. I have homevision controller conected to pc. Numerous light,appliance modules and wireless pir's Colour...
I agree that it is probably a software problem, and attribute no fault in the HV hardware, but there hasn't been a driver update from FTDI since 2001 or so....
Howdy, ... Only for some modules. Levitons green line switches, PCS switches and most SwitchLink switches support various versions of preset dim (though they...
Hi and welcome, I have a few different types of lighting modules and I can dim/bright them without going to full on first. My modules are of the plugin type ...
Hi Schelte, Thanks for your reply. I was using a TiVo but now I have switched to "Windows Media Center" I have the YAC listener is imbedded into Media Center...
Hi, Thanks for info, I have been using LM12W modules these do not seem to dim on first go.. I have just ordered some new din mounted controllers (LD11), hope ...
This is an example of my off schedule based on pressing A9 on my remote. X-10 SIGNAL 'OFF' EVENT # A 9 'Lights on / off' X-10: A 1 (Halogen) Off X-10: A 3...
I think this has been covered before, and I might have even been the person to ask, but I can't find it searching in the archives. Speaking of which, does...
... During a download, for all those objects where you selected an initial state of "No change" the software first reads the old state from the homevision...
Some more info for you to digest. The LM12W is esentially an LM12 without the plug. To make these dim or bright you must first switch them on then use the dim...
Hi, Thanks for info, not had much time to play but still struggling with some basics. A few things Im trying to do: These are just examples..just trying to get...
Not sure I fully understand the question, but I'll give it a shot. I would use Scheduled Events when you have specific times (10am, 11am, 3pm, 4pm). If you...
Hi yea thats exactly what i mean, I have just set flags one for home and one away etc Is it best then to use a periodic event to continualy check flags then if...
ok thats prob not the thing to do, I cant find how to check flags! Maybe I should run a macro one for home and one away and one cancel.. Then in the macro...
Kieran, Now you have the right way to do it (separate macros and enable the scheduled events as needed). In your previous post you mentioned doing periodic...
Hi again, It depends on how you want things to work. In your schedules you could put an if statement so if the home flag is enabled then it will continue...
What I do is create a scheduled event for each time. I then have flag that indicates home or away. In each scheduled event, I use an IF-THEN statement to...
I've had my HV system for about 3.5 years. With the digital temp sensors, a custom HVAC board, and a little programming, it has been in service as a...
Are the errors similar to what you where getting before you added the extra components. Try replacing the capacitors and or the resistors. It may even be the...
I would like to add motion sensors throughout the interior of my house for simple occupancy detection (not security). Simply connected to the HV inputs. Can...
I feel a bit silly asking this but I am lost... All I am trying to do is add a line of text with the date and time to a text file! So far I have a .txt file...
I have had many problems with my sensors also, with similar characteristics of working for some time, then breaking down. What I have read while researching...
Thanks all for help.. Craig, I have set it up using macros at present, I done it your way first and got a bit confudled..I think I may well go back to this way...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
