Hi Frank, My web page has, as entry point, directly the HV initial web page so I do not have (yet) any public part of it. Anyway, I could send yo directly the...
That is what ACE uses to get the cid info. One thing ACE is meant to do is provide a link so data can be exchanged between various hardware and software...
Why have you not got ACE!!! Go get it!! I think ACE and HV ARE the best things since sliced bread!!! Shame on you Sir..... Just my opinion you understand :-)))...
Kris, yes you can connect. The application note covers why you need to be careful how you connect to the "rcvr in" port on the Xantech blocks. The specifics...
ACE is cool K ... From: Brian G. Reynolds [mailto:brian.g.reynolds@...] Sent: Saturday, February 01, 2003 5:11 AM To: homevision-users@yahoogroups.com...
John Thanks ... From: John Tollini [mailto:john@...] Sent: Saturday, February 01, 2003 6:52 AM To: Home Vision Users Subject: [HOMEVIS] Subject: HV to...
Craig, Yes I've downloaded the schedule amny times as I am going through a phase of repid system development. The s/w is running under Xp pro on a dedicated HA...
Julian, I tested it here and it works fine. What version PROM do you have? The PROM is what controls sending out the report (assuming the PC software has ...
I just had a Channel Plus Transformer go south on me. It seems to be non standard, and Digi Key does not stock it. 110VAC to 12VDC 400MADC - 1.3mm cord plug ...
Can you order it from Channel Plus? Any electronic store in town will have bunch of them. You need polarity to. I'm asking because I'm using their product to. ...
Jameco has a 12VDC, 300ma, 1.3mm plug, center positive (part number 201099). 300ma may be enough for you. If not, you could cut it's plug off and use it on a...
Hi Craig and others I'm having some problems transmitting IR signals. When HV receive IR signal #9 then accordingly to the action defined for this signal # it...
Kris, Put a serial command in the IR event to transmit a message. That way, you will know for sure that the event ran. If it does run, and the IR signal you...
Craig, It is not working. The terminal emulation log is showing the receiving of proper IR signal but the serial command and IR transmitting was not executed. ...
Hi Kris I tried to do something similar with my system...ie when i press channel up on my ha remote the hv video menu comes up (on the correct zone tv) and...
Kris, Frank has hit on something. I don’t think you can use the same signals as the ones that control the video menu system (as defined in the Video Remote ...
Thank you Frank and Craig So I need create macro which will be triggered by other IR signal and then inside macro turn on the HV Video and transmit the IR...
Hi Kris Yes i used the 0 button on the ha remote (standard code) and in the ir actions called a macro which in my case detected which zone(room) was active...
I have found that the connection speed of my modem drops when the Phone/Serial device is connected (on-hook) to the phone line. Without the Phone/Serial device...
Hi Kris I detect receiving zones with my FirM controller ..which reports back to Homevision which zone the received ir signal came from...... Frank ... From:...
Thanks Kris ... From: Frank Mc Alinden [mailto:armagh@...] Sent: Thursday, February 06, 2003 6:55 PM To: homevision-users@yahoogroups.com Subject: Re:...
When I use HV to disply TV pictures over my Sky video out (Via scart) the picture from sky disappears Weather HV is displaying pic’s or not.. get HV to just...
Kris, A bit late but perhaps still useful (I expected someone else would've suggested this by now): In the Remote Control Configuration screen you can specify...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
