Hi, I noticed that when you compare a range plan generated for a dive it does not always match the deco profile dictated byt the program for the given time....
Hi Marcin, I verified the problem exists. Take a dive to 130 ft for 30 min on Air. No problems. I increased the percentage of O2 by one percent with no...
Thanks Adam, I've located the problem which is due to erroneous formating. The formatting function automatically rounds the total number of minutes to the...
Hi Marcin, While you are fixing that bug, you may want to look into the fact that the first stop should never be a fraction of a minute if the minimum stop...
Hi All, Just a quick update: 1) The bug in time formatting in the range plan has been resolved and the update is available in the usual place. 2) The website...
Looks like you compiled it while it was off 1024x768 screen... have to maximize via the right click to see it... ... [Non-text portions of this message have...
... is available for download from http://www.hlplanner.com/lpacks.htm Any comments from all francophones will be much appreciated :) Best Regards Marcin...
When I use a TMX as deco gas, and execute the result, the mix deco gas appears strikethrough in the deco gas windows... What does this mean? Thank you Best...
Sorry for the trouble, I don't know what happen. I didn't get the problem anymore. If I get it again, I let you know. Thank you, ... screenshot so I can see...
Hi Carlos, I may only suspect that you entered switch depth that was greater than the MOD. In such a case the deco gas is displayed in bold red font. Best...
Marcin, It's still not crystal clear for me how it works .... the gas switch in HLPlanner I mean ;) When I use EAN50 as deco-gas and set it to be switched at...
Hi Nico, First of all sorry for delayed answer but I was on holiday with no Internet access. ... HLPlanner "performs" gas switches only at deco stops. ... ...
Marcin, Thank you for ur answer. I thought I'd change at 22 msw and then go to the first mandatory stop depth. Why do I indicate a switch depth at the deco-gas...
Hi Nico, ... There are 2 cases when you'd want to override the default MOD based switch depth: first when you want to exceed PPO2 of 1.6 ATA e.g switch to O2...
Hi All, I have just produced a gas blending program based on real gas laws, which is actually a prototype of a gas blending module to be included in HLPlanner...
Thanks a lot Marcin! Another very welcome piece of software. Allthough I look very much out to the PocketPC version of the planner;-) One suggestion in the...
Hi Nico, ... "be patient, my young apprentice" [Obi-Wan Kenobi] :) ... I knew this one is going to bug me :) I'll think of something. Best Regards -- Marcin...
Hello, my name is Manuel Delgado, i am a spanish diver. If you want I offer to you to translate hlplanner to the Spanish (Castilian i prefer) .. I am...
Hi Marcin, Hi all I'm Pierre, a new member of the group. I'm a french OC, (SCR) and CCR diver... so please let me first apologize for my poor english. I've...
Hi Guys, New Member, and apologise if this question is asked a million times before, however Is it possible to set up the print outs for DECO and Range plans...
Hi Steve, Sorry for the late answer but I was on holiday for the last 2 weeks. Back to your question: unfortunately at present you have to choose between...
Thanks for the reply Marcin, Isn't a big deal, currently i just copy and paste into excel then manually enter the stop times at this stage.. Will look forward...
Hello to you all I would like to ask you how you set your own safety factor in HLPlanner? To receive similar total decompression time to my previous program...
Hi Misiu :) Personally I use 10% SF mainly due to people I dive with (and we usually spend ~5min@21m). If I was to do it on my own I'd probably go for 0% ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
