This is my first posting here so "Hello to all!". I just received my tuner in the mail on Friday and got it in line Friday night. I had a 989C before this and...
Hey all; Having Troubles getting the Tuner to Memorize or Keep the Manual Settings as per the Instructions in the "Tech Bulletin #2" I Tune in Manual, go back...
Jeff - My experience is that when you go to manual, you need to manually tune to the absolute minimum SWR before going back to auto. If you just tune to...
71
hf_auto@yahoogroups.com
Dec 4, 2011 7:41 pm
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the hf_auto group. File : /Bul_4A.pdf ...
Jeff, what value is the TUNING LEVEL SET TO in the menu?? Jim - KE4WY ... From: hf_auto@yahoogroups.com [mailto:hf_auto@yahoogroups.com] On Behalf Of ** N8NOE...
Jim, It's Set to 1.62.. I did try the Tune Best I Can., and it was fine till I changed Bands, then it wanted to tune again for 15M.. I'm using a Windom and...
SET THETUNE MENU TO 1.15 LIKE THE OP MAN SAYS IT TUNES EASIER ... From: ** N8NOE ** <N8NOE@...> To: hf_auto <hf_auto@yahoogroups.com> Sent: Mon, Dec 5,...
Jeff, if you have it tuned completely and then turn the Amp on transmitting at say 1500 watts and it HUNTS or retunes while you talk you can raise the tuning...
Jim; Tried it again lastnight. I got it tuned on 15 "Best Possible 1:50" and changed back to Auto, it did NOT search, but going to another Band and tuning it...
Jeff, is the tune timing at 1, 2, or 3? Jim ... From: hf_auto@yahoogroups.com [mailto:hf_auto@yahoogroups.com] On Behalf Of ** N8NOE ** Sent: Tuesday, December...
Jeff - If the best you can do manually is 1.5:1 SWR on 15 meters, you have a very complex and difficult reactance on that frequency. It is difficult, but not...
Has anyone used the tuner yet with something like 600-ohm open wire line? The tuner's design appears to be unbalanced, yet it is also isolated from the...
Jeff, it should remember with 1.06? The reason I asked you about the tune timing and if it's 1, 2 or 3. (1) will find the match quickest but if you have a...
Gary - My 260' center fed doublet fed with 500 ohm home brew open wire feeders works great. But, I use a hefty external balun and a short run of coax to the...
John, Thanks for the response. You've got the actual box. I'm just looking at the web site. What I see is a back panel with 2 feedthrus for OWL. I'd like to...
Gary - Are you talking about the AT-Auto or the new HF-Auto that this group discusses? The AT-Auto is a very different piece of gear the is no longer related...
The feature description if the HF-AUTO on the website is a bit sparse - is the manual downloadable somewhere? I'm considering it for a remote base setup. I'm...
Thanks Iain, That did the trick. I do not know why it would not open before. Neil -- *"Let us not accept mediocrity in the guise of building self esteem." * ...
Hello all - yes, there's a few grayed out spots - trying to fix it ASAP. From: hf_auto@yahoogroups.com [mailto:hf_auto@yahoogroups.com] On Behalf Of Neil...
A temporary fix of the manual has been uploaded to http://www.palstar.com/hf-auto.php From: hf_auto@yahoogroups.com [mailto:hf_auto@yahoogroups.com] On Behalf...
Greetings to all; I was wondering if it would be possible to plug an antenna analyzer into the HF-AUTO and see if the power out of the analyzer is enough to...
