Hi Martin - Cheers for reposting! Yep, I am thrilled with it and just ironing out my understanding of the tuning logic and memories today (re; tune from a dit...
Michael, Good news, I got mine to take the new setting after several attempts at tuning the same old frequency with the new antenna. Guess it just took the ...
Good show Ron! Can you give me any clues on improving the memory settings on mine? Should I tune manually then go to auto in order to override the memory...
I followed the manual and did the manual tune and then switch to auto tune procedure. It seemed to take about 4 or 5 attempts at using that method before the...
Ron, I did the same as you but got "UNABLE TO TUNE" message. It does this sometimes on 40 and most times on 80m. I switch to Manual tune and find a low SWR...
Yes I would get that also. pre-ferrite. Try a slower step speed also, that may help. Ron WM9Q From: hf_auto@yahoogroups.com [mailto:hf_auto@yahoogroups.com]...
I saw the "UNABLE TO TUNE" message only a single time, post-ferrite. This was after it looked like it had gotten in some sort of tuning loop and just couldn't...
Using our USB to RS-232 adapter with windows 7 Subject: Windows 7, USB to RS232 Adapter installation For Windows 7 USB to RS232 Adapter installation 1) Plug...
Subject: HF-AUTO tuning time To reduce the tuning time of the HF-AUTO please try making the following changes in the unit's setup menu: 1) Change the QUICK...
Ok Thanks Paul, That explains the behavior. Ron WM9Q From: hf_auto@yahoogroups.com [mailto:hf_auto@yahoogroups.com] On Behalf Of Paul Hrivnak Sent: Monday,...
... Thanks for this Paul. This demystifies something I was half suspecting happened, based on my experiences where sometimes the memory seemed not to take but...
I watched the video and am considering a purchase. The video mentions that this tuner will be available as a remote tuner in a waterproof contaniner. 2...
Hi Dave Palstar will show a working remote head (HFAUTO-R) at Dayton this year. It will use a regular HF-AUTO with modifed software to function with the remote...
Thank you Paul. I appreciate the response and certainly don't want to steal your thunder at Dayton, hi. I was wondering if I should wait to purchase an...
Hi - I would like to offer these suggestions in the spirit of improvement. - Drive the motors for L and C simultaneously where possible It would be faster to...
Aloha Everyone, I'm still getting the "Unable to Tune" message especially on 80m and sometimes in the higher bands. I put clip on ferrite beads on both the...
Hi Delwyn, I sometimes get that. For me, I have a 160m ant and tuning it on 80m is quite a 'pin head' to balance on. I find that if the tuner starts off in the...
Delwyn - What version of firmware are you running? I've updated to the most recent and Palstar sent me a power cord with a big ferrite wrapped into it. That...
I'd call Palstar next and ask them about the power cord with the ferrite wound into it. They sent me one when I reported the unable to tune issue with mine. ...
I have the power card with the ferrite wound into it and I'm running 1.17. Occasionally, I still see the "UNABLE TO TUNE" message. I think it *may* have...
Interesting. I used to see that message quite often but haven't noticed it since changing the power cord and updating to the newest firmware. There are times...
Just saw this tweet from Dayton, but his pic looks like an HF-Auto with the cover removed. Any offical word on this? @erayboul: Palstar has a remote head for...
Thanks! And thanks also to @erayboul/N8OFI, who is also monitoring this forum. His latest tweet: @erayboul: Better pic of Palstar HF-AUTO-R. Can confirm it's...
