Hello. I tried to download "model-2017151210.zip (2kB)" from the site of DL7IO but link do not work. Anyone know were I can found a 20/17/15/12/10 model...
Giorgio, I have uploaded a 5 band Top Feed EZNEC model to the Files section of this Group. Look in the G3TXQ folder. Ignore the segment size warnings - the...
Hi folks, I was able to put together the 40m-10m hexbeam over this weekend. The use of RG-58U seems to work for the 40m elements although I did not get to put...
Phil, Sorry to hear that the XYL didn't appreciate the "beauty" of the big HexBeam :) You say you had trouble tuning the 40m elements. I wonder what parameters...
... Hex ... I have my hex beam up. Have not heard one station from US. I will let you know if it is possible to contact anyone with time and freq. Low sun spot...
3503
hex-beam@yahoogroups....
Nov 7, 2006 2:56 pm
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the hex-beam group. File :...
I am not expert in antenna modelling AND I AM NOT SURE IF MY MODELS ARE CORRECTED, but I have tried to do a comparation from some 5 BANDS model with 4nec2...
Giorgio, Some things for you to check: 1) Are the results all produced under the same conditions i.e. are they all in Free Space, or if they are above Real...
Giorgio, Some further information. Your DL7IO model is producing some very strange impedance values. You appear to have 5 transmission lines interconnecting...
Hex up and on the air last night. Only 30 feet off ground. Big pile up from Europe. Worked several US stations on West Coast. Hex is much better than my old ...
Hi John I am on the east coast of the USA. Maybe a sched early( eastern time) Sunday am. That is when I hear most Japan, Chinese...and Asia. I run my 5 band...
Hi Steve, tnx for all your info. Before your msg, I do not knew average gain test and now I have read the Cebik article but I have many difficult with...
Hi, From Idaho I hear JA and the Pacific every day from 2100Z thru about 2400Z on 20/17/15 meters. I think that might be the times to look.It might be early...
Georgio, You might try increasing the impedance of the transmission line on the DL7IO model to about 200 Ohms and see if the SWR improves. Holger's models...
Hey John! Was on frequency today, but could not copy you and I don't think you could copy me either. Will try every day until I make it. I got your info...
Was able to work W6HB HEX to HEX He had a 58 sig. Will be on 18.15 at 1500 tonight and 14.245 from about 1520 till 1630. K7HC tried but could not make it. John...
John, I'll be listening for you. I have a Hex Beam on 20 Meters. I am a bit confused, however, by your use of "tonight" -- Would that be tomorrow night in...
Thanks Have the local governments put any restrictions on his operating ? I think 15 or 20 meters would be the way to go. Keep me in the loop...I would like to...
MADE IT HEX 2 HEX in XU! Thanks John. I could hear you on 17, but no copy for a QSO. On 20 you were way down at first and my first call did not make ie, but...
John, Just for your information - I have been working Hong Cong with strong signals at 0030 Z. I think that's around 7:30 AM your time, but not at all sure...
Have make many contacts to US between 1200 and 1600 GMT. East Coast at 1200 West at 1600. I will try to be on 14.245 2330 to 0030 call me I will listen. I will...
Hi John, Are you planning on working CW? If so, what time and frequency? 73 Alex VE3NEA Have make many contacts to US between 1200 and 1600 GMT. East Coast at...
Hi, I have had the parts for a Hex Beam sitting around for a while now. I have some time on my hands and am ready to assemble the beam. I am following the...
I installed a 2 element Steppir on a flat roof with the rotator on the bottom for a friend, and used a TB-105 support bearing for the top guy ring. It's got...
Thanks Doug, That could be just what I am looking for. From the pictures, it looks like there is a range of diameters. But I can't find any specs. I could use...
Ah, the inside diameter of the TB-105 is limited, but think it was maximum 1.5 inches, with a bit of filing of flashing to get that. So, if you used a...
I have the 20 Meter Hex beam at 30 ft on a fiberglass 40-ft Wonderpole ( http://www.wonderpole.com/ ) with NO guy wires at all. The rotor is at the bottom and...
I built a 5-band Hex-beam according to the exact measurements. For 20m the measurement is 5.52m times 2. The SWR on 20m was 2.8 at 5m above ground. I the...
