Mike thanks for the info, will get on the 303 today,hopefully and change out the caps...see what happens thanks dale wt4t ... From: w5rkl <w5rkl@...> To:...
In a message dated 10/12/2009 14:29:47 GMT Standard Time, yash@... writes: Iam finishing work on a sb-303,all is well ,except for the audio. The audio is...
I have the same poor audio from my SB-303. It appears to be a design issue. I've cut and pasted a write up and a small change that may improve the audio...
Thanks for all the inputs. The 2000B that I was looking at was on auction and went for more than I was willing to pay, about $200 including shipping. Unless...
Iam finishing work on a sb-303,all is well ,except for the audio. The audio is tinny and very irritating.Will give you a headache in a coupla of minutes. I...
... Yes, Walt, I know what you mean. My MFJ tuner claims 3KW on the front but the book says that's PEP input to the amp. I hope it will handle 500 Watts output...
There's no need to run any additional microphone amplification on the Apache. The microphone impedance on the Apache requires a high impedance microphone which...
The Murch 2000B does have a relative reflected power meter but it is of limited usefulness. It does have an internal balun. I just sold one for about $100 that...
Hello all, I have for sale an AD-1305 Audio Equalizer and an AJ-1214 AM-FM Stereo Tuner. Both were built by myself and come with the assembly manuals. The...
Just a quick question, have a set of 303/401 twins that need to be gone thru,no longer have the greatest bench to do the work, Where can I send them ,other...
Ron My recollection is the 2000B has an internal SWR bridge and balun and may even cover 160M. The 2000A has neither and does not cover 160m. A balun can be...
You should probably use a preamp to match impedances. I checked the Apache specs and they don't say what the mike input impedance is. The attached files...
There is a manual and schematic for the 2000A on BAMA/EDEBRIS. Shouldn't be too different. I had one these (don't remember whether 2000A or 2000B for a long...
Oh, yes, I just noticed you also asked how to wire it. The Apache has a single connection microphone jack on the front. Wire the D-104 mike output lead...
Yes, indeed, it will work, and it will work just fine. However, since the stock Apache does not have PTT (push to talk), you will either have to throw the...
Group... Am wondering if a D-104 will work on an Apache... Have the D-104, and am working on the buying the Apache... If it will work, how does one wire it? ...
... I am familiar with many of those quotes; unfortunately, they were written by some of the most clever scriptwriters of the early 20th century, not Groucho....
Do you show grid and plate current? To: heathkit@yahoogroups.com From: reddenh@... Date: Tue, 8 Dec 2009 03:40:14 +0000 Subject: Re: [Heathkit:Yahoo]...
OK, thank you. I have a couple of the big Altec Lansing Voice of the Theater and thought maybe you had the same. I would love to have two more of them. I...
Are you planning to use them, sell them or ??? I picked up the SS1's a couple of months ago at a stereo shop. I think they must have sold someone a new...
Opposite of an open circuit: The resistance reading was the same as connecting the multimeter leads together. Because of this I was unable to tell if this was...
reddenh wrote: [...] ... That's certainly suggestive that the wire carried more current that it was intended to. What do you mean by "did not have any...
Mike McCarty
Mike.McCarty@...
Dec 7, 2009 11:34 pm
13332
Send the owner an email and ask why. ... From: <wa7dxz@...> To: <heathkit@yahoogroups.com> Sent: Monday, December 07, 2009 12:35 PM Subject:...
The Yahoo group name is Heathkit_HFAmps I found it by looking for an SB-200 group, it too me to them... I sent the owner an email asking why i was supposedly...
Hello All, This is my first post to the group. I am a somewhat new to the hobby and have a sb-301/sb-401 combo. Recently the 401 stopped transmitting. I...
I use a little box (ARB-704) from Ameritron that has worked very well with my SB-200 and these radios I have owned; Icom 756 Pro, Kenwood TS-570SG and a Yaesu...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
