I am using ver 5.0 build 2893 with a K3. I use it only for rig control. The program controls the K3 fine, however, the buttons do not all indicate properly...
I can connect to the radio via HRD, control the radio and everything BUT whenever i click the TX the program crashes.. Have to mention that I already have HRD...
HRD Software, LLC is pleased to announce the release of Version 6.0 of the Ham Radio Deluxe Software. The product will be available at noon on Friday, February...
Hi, I am able to make PSK31 contacts with the following set up Kenwood ts2000 rs232-to-usb converter usb signalink HRD For my next trick I would like to use...
I think this started with the released version of 6. TX text whether entered from a macro or manually typed is repeated on the next transmission. I need to...
I have a K3 set up with a microkeyer 2 and just finally figured out how to get the Winkey to work in CW mode with DM780. I was so stoked last night when I...
Anyone tried true FSK? if you think it works, what mode is your HRD screen set to? What mode is your dm780 screen set to? The only response I get here is to...
Greetings all.. I'm have DM780 - Vista desktop - ICOM 718 - with an MFJ 464 Keyer/Reader and keyboard (which I may not need?). Due to health issues I have...
I had a problem with Windows Explorer in Win7, and once I got it corrected, I found that the folder for DM780 logbook had somehow been marked as read only....
Hello, I have connected my 990 to pc using a Max232 interface (max232cse chip). It is connected and working great after I added the resistor between (serial...
I have been trying to label print and cannot get the label printer to center properly on Avery 5160 labels. Any recommendations on edit measurements would be...
Hi. I've searched the group and I found the same problem but not the solution. I have a Yaesu FT-920 and HDR 5.24.0.38 on my PC for remote use. The buttons...
HRD V6.0 has been successfully installed here at K6MKF and is working well. - 73 de Mike, <http://www.qrz.com/db/k6mkf/> K6MKF, <http://www.qrz.com/db/w6nag/>...
Hello Everyone, I'm running the HRD 6.22 beta and am using the HRD logbook as my primary log application. Earlier this week the FCC granted me a new call sign...
Hi all, I've published in Google Play store a new application named Pocket Transceiver (Pocket RXTX) which is able to control a transceiver in several ways -...
Morris, In DM-780, Program Options, Logbook, Make sure you have changed the current logbook in DM-780 back to My Logbook, or what ever the logbook was before ...
Hi there. I finally got my Sat rig hooked up and working last week (IC9100) and I have a question to anyone in the group who uses the sat tracker in HRD. I...
I am using HRD on Windows 8. The setup and communications with the radio are perfect. The HRD satellite tracking program and HDR rotator programs communicate...
I just want to say that the beta release has been rock solid at my QTH. With XP and and Elecraft rig. I stumbled on some of the features in the awards tracking...
When I start HRD it shows the com port as #7. That is wrong. When it finally fails to load I select port #10 and it loads OK. The problem is that it does not...
Hi all, In the preparation of a new Android CAT (and not only) application (Pocket RXTX) which I intend to publish at the end of this week (with HRD support),...
Can you make and tab when you select send (Yes) and recieved (Yes) and ( / )ticked, on the contact and it goes on a que so you can print Those on que for...
I'm about to jump on the KX3 wagon and it comes with a rig-to-USB cable. I am registered for HRD 6 but haven't been loading the Beta's 'cause I can wait for...
No matter what I do, I cannot get new Macros to be saved. I had a DM780 friend (via SSB) help me with this but still no go. Yes, I can change the text in the...
To all, I am trying to use HRD 5.24 with a xggcomms interface for rig control to my Kenwood TS-850. After about 6 minutes both the secondary then the primary...
