All This discussion is all over the place. Can I ask a basic question. What port number is assigned to that piece of USB/RS232 hardware? Please, take a moment...
Hi, I use a FT817 as my prime digital mode rig, so I have my profile set to 5 watts. When I make CW contacts I use a different rig and power level. I've...
Hi, I'm using a Fox Delta ST1 interface together with HRD Version 5 build 2893. The connection between PC (win xp)and ST1 happens via a Tweex USB-Serial...
I am using hrd and dm780 lastest version. I have noticed difficulty recently. Today I had 3 qsos all 599. But the return came back on a higher frequency....
First make sure RIT and XIT are off! If you then make any small adjustment to your receive frequency do it by RIT not main dial or HRD slider Roger [Non-text...
... This problem is generally caused by a full duplex sound card having different errors in the sample rate. The rx and tx offset need to be calibrated. Eric...
Marc, I don't know about #1 but as for your #2 question, The ST-1 does NOT report back the AZ and EL to The computer/program, this is why the indicators in the...
Wondering what rig you are using.. most rigs will drift some.. a few hc to 20 50 hz that you can see.. if you just use the AFC you should not have much...
I did update the usb driver now and I don't get the blue screen but the radio control program will lock up after a bit, I found that if I only run Digital...
You are still having Prolific USB to Serial adapter driver problems. The reason DM780 and the Logbook program run forever is because they don't use the USB to...
Okay, I am too lazy to scan the documentation for sound card calibration but I will read it - promise. But for now, what do we do with the results? I'm must a...
Okay, I am too lazy to scan the documentation for sound card calibration but I will read it - promise. But for now, what do we do with the results? I'm must a...
I am using Signalink USB.But the driver does not say anything about Prolific USB to Serial adapter driver, I downloaded a windows 7 driver from the web site...
From the SignaLink website: The SignaLink USB is a sound card interface that provides the necessary hardware to operate all sound card digital and voice modes,...
Hi Tony, Many thanks for answering my questions. In the meantime i found out that the USB--->Serial problem has nothing to do with HRD. I've used a real...
I run a Kenwood TS-2000 and it has a serial port on the radio so I use the USB to Serial cable....my new computer only has USB (9) of them....no serial port on...
The problem is with cables using the Prolific chip. Whether the cable OR the drivers, the Prolific is the problem. A normal serial port on a desktop works 100%...
On my Yaesu FT-950, it's called RX CLAR instead of RIT. Pat - W9ZO ================================================================================ ... ...
Ron, It is the converter chip in the cable. You need a cable with a FTDI chip in it if you want to successfully use it with Win 7 and HRD (and some other ...
OK I give up where do I buy a cable with a FTDI Chip? John From: ham-radio-deluxe@yahoogroups.com [mailto:ham-radio-deluxe@yahoogroups.com] On Behalf Of James...
Hi, This is a bit off-topic from Ham Radio Deluxe, and I hope it does not offend the group moderators. I bet there are a few Amateur Radio operators who wish...
Hi all jut got my FT-990 interface working & was wondering if anyone has the antenna tuner buttons & status flags programmed? All the missing CAT commands for...
John, I bought mine from RT Systems. Others have bought theirs elsewhere but this is the only place I know for sure. http://www.rtsystemsinc.com/ James "Jim"...
John, Here is where I got mine. They had the best prices I could find on the web. http://www.usbgear.com/USB-Serial.html And this is the model I use and has...
...just be sure and pick one that has the FTDI chip. James "Jim" M. Geidl, K6JMG No trees were harmed in the sending of this message; however, a large number ...
