Thank you gentlemen (Well most of you anyway). I do hope to upgrade to a
classier rig one day, but not until this one dies a permanent death, the trouble
being that these 'old' rigs are built to last, unlike many of the newer rigs
that are so full of specialised  ICs that will not be available in years to
come, and therefore non-repairable.
Best 73s.
Ron GW1HIN UK

--- In ham-radio-deluxe@yahoogroups.com, "Mike" <noddy1211@...> wrote:
>
> It has a very primitive CAT interface, which can be used only to command the
> radio. (Change VFOs, Frequency, enable/disable functions).  The key word
> being command, as has been said before if you change anything on the rig it
> cannot be read by an external software program, making it all but useless
> which is most likely why it is not listed in suit of radios that HRD
> supports.
>
>
>
> Yes, we can wish, dream and criticize but facts are facts unfortunately.
>
>
>
> Mike
>
>
>
> From: ham-radio-deluxe@yahoogroups.com
> [mailto:ham-radio-deluxe@yahoogroups.com] On Behalf Of Dave AA6YQ
> Sent: Thursday, November 26, 2009 11:07 AM
> To: ham-radio-deluxe@yahoogroups.com
> Subject: RE: [ham-radio-deluxe] HRD not reconising my Transceiver.
>
>
>
>
>
> The FT-757GX does have a CAT interface.
>
> 73,
>
> Dave, AA6YQ
>
> -----Original Message-----
> From: ham-radio-deluxe@yahoogroups.com
> <mailto:ham-radio-deluxe%40yahoogroups.com>
> [mailto:ham-radio-deluxe@yahoogroups.com
> <mailto:ham-radio-deluxe%40yahoogroups.com> ]On Behalf Of Pat-W9ZO
> Sent: Thursday, November 26, 2009 1:23 PM
> To: ham-radio-deluxe@yahoogroups.com
> <mailto:ham-radio-deluxe%40yahoogroups.com>
> Subject: Re: [ham-radio-deluxe] HRD not reconising my Transceiver.
>
> Seeing that this radio is about 25 years old, it probably does not
> support CAT control.
> Simon can't put something into the program if the radio is too old to
> have the CAT commands built in.
> Time to buy a newer rig.
> Pat - W9ZO
>
> uk_microguy wrote the following on 11/26/2009 10:15 AM:
> >
> >
> > Hi,
> > When I come to install HRD, I find my transceiver FT-757GX is not
> > listed. It seems that the author assumes that we are all rich and only
> > lists recent stuff. Or, have I got it all wrong (again).
> > Best 73s.
> > Ron GW1HIN UK
> >
> >
>
> [Non-text portions of this message have been removed]
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.426 / Virus Database: 270.14.83/2526 - Release Date: 11/26/09
> 09:10:00
>
>
>
> [Non-text portions of this message have been removed]
>

It has a very primitive CAT interface, which can be used only to command the
radio. (Change VFOs, Frequency, enable/disable functions).  The key word
being command, as has been said before if you change anything on the rig it
cannot be read by an external software program, making it all but useless
which is most likely why it is not listed in suit of radios that HRD
supports.



Yes, we can wish, dream and criticize but facts are facts unfortunately.



Mike



From: ham-radio-deluxe@yahoogroups.com
[mailto:ham-radio-deluxe@yahoogroups.com] On Behalf Of Dave AA6YQ
Sent: Thursday, November 26, 2009 11:07 AM
To: ham-radio-deluxe@yahoogroups.com
Subject: RE: [ham-radio-deluxe] HRD not reconising my Transceiver.





The FT-757GX does have a CAT interface.

73,

Dave, AA6YQ

-----Original Message-----
From: ham-radio-deluxe@yahoogroups.com
<mailto:ham-radio-deluxe%40yahoogroups.com>
[mailto:ham-radio-deluxe@yahoogroups.com
<mailto:ham-radio-deluxe%40yahoogroups.com> ]On Behalf Of Pat-W9ZO
Sent: Thursday, November 26, 2009 1:23 PM
To: ham-radio-deluxe@yahoogroups.com
<mailto:ham-radio-deluxe%40yahoogroups.com>
Subject: Re: [ham-radio-deluxe] HRD not reconising my Transceiver.

Seeing that this radio is about 25 years old, it probably does not
support CAT control.
Simon can't put something into the program if the radio is too old to
have the CAT commands built in.
Time to buy a newer rig.
Pat - W9ZO

uk_microguy wrote the following on 11/26/2009 10:15 AM:
>
>
> Hi,
> When I come to install HRD, I find my transceiver FT-757GX is not
> listed. It seems that the author assumes that we are all rich and only
> lists recent stuff. Or, have I got it all wrong (again).
> Best 73s.
> Ron GW1HIN UK
>
>

[Non-text portions of this message have been removed]



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.426 / Virus Database: 270.14.83/2526 - Release Date: 11/26/09
09:10:00



[Non-text portions of this message have been removed]

Don't know if this will be of any help, I wrote this "getting started thing"
a few years back.



Go to http://www.k6br.net/



And then the Remote button to view/download the PDF.



Mike



From: ham-radio-deluxe@yahoogroups.com
[mailto:ham-radio-deluxe@yahoogroups.com] On Behalf Of barrie.crampton







I would appreciate advice on how to enable the IP server in version 4.

Prior to installing the no-ip DUC I was able to start or stop the IP server
which carried the localhost IP address.

Since installing the DUC The IP server listener will not start and the local
host address remains.

Thanks
Barrie



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.426 / Virus Database: 270.14.83/2528 - Release Date: 11/26/09
09:10:00



[Non-text portions of this message have been removed]

I would appreciate advice on how to enable the IP server in version 4.

Prior to installing the no-ip DUC I was able to start or stop the IP server
which carried the localhost IP address.

Since installing the DUC The IP server listener will not start and the  local
host address remains.

Thanks
Barrie

Yes, you have it wrong.



The author does realize that people like you are not Rich, he makes the
program FREE for people  to use.  He does rather hope that one has a
transceiver that will accept CAT commands that can make use of the abundant
features he has built into the program.



Mike



From: ham-radio-deluxe@yahoogroups.com
[mailto:ham-radio-deluxe@yahoogroups.com] On Behalf Of uk_microguy
Sent: Thursday, November 26, 2009 8:16 AM
To: ham-radio-deluxe@yahoogroups.com
Subject: [ham-radio-deluxe] HRD not reconising my Transceiver.





Hi,
When I come to install HRD, I find my transceiver FT-757GX is not listed. It
seems that the author assumes that we are all rich and only lists recent
stuff. Or, have I got it all wrong (again).
Best 73s.
Ron GW1HIN UK



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.426 / Virus Database: 270.14.83/2526 - Release Date: 11/26/09
09:10:00



[Non-text portions of this message have been removed]

Robert please make sure that you follow the steps in the order that was written.
If you still have problems email me direct and I'll be happy to help you out.
Double check your "ALE" and make sure that the boxes are filled in then click
save.
Once you save then it should start adding the "Distance" data.
Happy Thanksgiving to everyone. I'm on my way to mom's.
Will return this evening. Robert don't worry we'll get it going.
Gobble, Gobble.....
 Ruben Echevarria KA2HHB
070 Club#861 30MDG#1148
10-10#33308




________________________________
From: Ruben Echevarria <ka2hhb_2000@...>
To: ham-radio-deluxe@yahoogroups.com
Sent: Thu, November 26, 2009 11:59:26 AM
Subject: Re: [ham-radio-deluxe] Re: How to activate the "Distance" option in
Logbook

 
No, you shouldn't have to do it everytime. Just once to get it all going. After
that it will add the Distance everytime you add a contact.
 Ruben Echevarria KA2HHB
070 Club#861 30MDG#1148
10-10#33308

____________ _________ _________ __
From: "purrins1@comcast. net" <purrins1@comcast. net>
To: ham-radio-deluxe@ yahoogroups. com
Sent: Thu, November 26, 2009 11:45:47 AM
Subject: Re: [ham-radio-deluxe] Re: How to activate the "Distance" option in
Logbook

 

Hello,

     Am I missing something? I followed all the instructions, and the "0" is
in the distance row in the log book.

If I click on the "Ctrl" button and the and "A" button, then to go to "Click
the "More" dropdown button, I select Bulk Editor/Distance & Heading. Click
Update. I then Click Finish to have the new contact distance in the log book. 
My question is this.  Do I have to do this everytime I make a contact?

73 Robert

KF2GQ

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

The Icom IC-706MkIIG has a CAT interface too, but Icom did not include
ways of programming remotely *everything* that can be changed from the
front panel.

73

Alan NV8A


Dave AA6YQ wrote:
> The FT-757GX does have a CAT interface.

> Seeing that this radio is about 25 years old, it probably does not
> support CAT control.
> Simon can't put something into the program if the radio is too old to
> have the CAT commands built in.
> Time to buy a newer rig.
> Pat - W9ZO
>
> uk_microguy wrote the following on 11/26/2009 10:15 AM:

>> When I come to install HRD, I find my transceiver FT-757GX is not
>> listed. It seems that the author assumes that we are all rich and only
>> lists recent stuff. Or, have I got it all wrong (again).

The FT-757GX does have a CAT interface.

     73,

          Dave, AA6YQ

-----Original Message-----
From: ham-radio-deluxe@yahoogroups.com
[mailto:ham-radio-deluxe@yahoogroups.com]On Behalf Of Pat-W9ZO
Sent: Thursday, November 26, 2009 1:23 PM
To: ham-radio-deluxe@yahoogroups.com
Subject: Re: [ham-radio-deluxe] HRD not reconising my Transceiver.



Seeing that this radio is about 25 years old, it probably does not
support CAT control.
Simon can't put something into the program if the radio is too old to
have the CAT commands built in.
Time to buy a newer rig.
Pat - W9ZO

uk_microguy wrote the following on 11/26/2009 10:15 AM:
>
>
> Hi,
> When I come to install HRD, I find my transceiver FT-757GX is not
> listed. It seems that the author assumes that we are all rich and only
> lists recent stuff. Or, have I got it all wrong (again).
> Best 73s.
> Ron GW1HIN UK
>
>





[Non-text portions of this message have been removed]

--- In ham-radio-deluxe@yahoogroups.com, "uk_microguy" <ronelltom@...> wrote:
>
> Hi,
> When I come to install HRD, I find my transceiver FT-757GX is not listed. It
seems that the author assumes that we are all rich and only lists recent stuff.
Or, have I got it all wrong (again).
> Best 73s.
> Ron GW1HIN UK
>
Also:
It has a very primitive CAT interface, which can be used only to command the
radio. (Change VFOs, Frequency, enable/disable functions).

Unfortunately:
1- It cannot change the mode (it has a rotary switch)
2- It cannot report information back (the CAT is
unidirectional)
3- As a consequence of 2 if you make a change in the front panel, it goes
completely unnoticed in the program.

Pat - W9ZO

Ron,

Try another Yaesu rig close to the FT-757GX and see if it works.  The
command sets seem pretty standardized by manufacturer.

BTW, which interface are you using with you 757GX?  The FIF-65, FIF-232C or
???

On Thu, Nov 26, 2009 at 8:15 AM, uk_microguy <ronelltom@...> wrote:

>
>
> Hi,
> When I come to install HRD, I find my transceiver FT-757GX is not listed.
> It seems that the author assumes that we are all rich and only lists recent
> stuff. Or, have I got it all wrong (again).
> Best 73s.
> Ron GW1HIN UK
>
>
>



--

73 de Mike, K6MKF


[Non-text portions of this message have been removed]

Seeing that this radio is about 25 years old, it probably does not
support CAT control.
Simon can't put something into the program if the radio is too old to
have the CAT commands built in.
Time to buy a newer rig.
Pat - W9ZO

uk_microguy wrote the following on 11/26/2009 10:15 AM:
>
>
> Hi,
> When I come to install HRD, I find my transceiver FT-757GX is not
> listed. It seems that the author assumes that we are all rich and only
> lists recent stuff. Or, have I got it all wrong (again).
> Best 73s.
> Ron GW1HIN UK
>
>

No, you shouldn't have to do it everytime. Just once to get it all going. After
that it will add the Distance everytime you add a contact.
 Ruben Echevarria KA2HHB
070 Club#861 30MDG#1148
10-10#33308




________________________________
From: "purrins1@..." <purrins1@...>
To: ham-radio-deluxe@yahoogroups.com
Sent: Thu, November 26, 2009 11:45:47 AM
Subject: Re: [ham-radio-deluxe] Re: How to activate the "Distance" option in
Logbook

 


Hello,

     Am I missing something? I followed all the instructions, and the "0" is in
the distance row in the log book.

If I click on the "Ctrl" button and the and "A" button, then to go to "Click the
"More" dropdown button, I select Bulk Editor/Distance & Heading. Click Update. I
then Click Finish to have the new contact distance in the log book.  My question
is this.  Do I have to do this everytime I make a contact?

73 Robert

KF2GQ


[Non-text portions of this message have been removed]

It's really Jose's work I just did part of the write up, but thanks.
 Ruben Echevarria KA2HHB
070 Club#861 30MDG#1148
10-10#33308




________________________________
From: Howard Z <Howard_Z@...>
To: ham-radio-deluxe@yahoogroups.com
Sent: Thu, November 26, 2009 9:03:17 AM
Subject: [ham-radio-deluxe] Re: How to activate the "Distance" option in Logbook

 
Ruben

Thanks - worked great.

Howard

--- In ham-radio-deluxe@ yahoogroups. com, Ruben Echevarria <ka2hhb_2000@ ...>
wrote:
>
> This was accomplished with the help of José Dumoulin F5JD.
> First thing to make clear is that the "ALE" of the Logbook is the one that is
used, not HRD or DM780.
> Click on your "Logbook" once it's up click on the green "ADD" icon, this
brings up the proper "ALE" go to
> "My Station" and fill in the blanks then click save. There are 10 save fields
choose #1 if you are or will be
> operating with different equipment then you can choose a different number and
save. Close the "ALE".
> This will be the information that your logbbook will be using.
> Once this is done you'll want to update and fill in the blank "Distance"
entries.
> To accomplish this bring up your logbook (you should see your entries), then
click Control+A this will
> tag all of your logbook entries by turning them all blue. Just above the
entries, there is a menu.
> Click the "More" dropdown button, select Bulk Editor/Distance & Heading. Click
Update. Click Finish.
> With F5JD's help I finally fixed my logbook as long as there is a locator
entry there will be a "Distance" entry.
> Many thanks to José Dumoulin F5JD for his help.
>
> Ruben Echevarria KA2HHB
> 070 Club#861 30MDG#1148
> 10-10#33308
>
> [Non-text portions of this message have been removed]
>




[Non-text portions of this message have been removed]

Hello,



     Am I missing something? I followed all the instructions, and the "0" is
in the distance row in the log book.

If I click on the "Ctrl" button and the and "A" button, then to go to "Click
the "More" dropdown button, I select Bulk Editor/Distance & Heading. Click
Update. I then Click Finish to have the new contact distance in the log book. 
My question is this.  Do I have to do this everytime I make a contact?



73 Robert

KF2GQ

----- Original Message -----
From: "Howard Z" <Howard_Z@...>
To: ham-radio-deluxe@yahoogroups.com
Sent: Thursday, November 26, 2009 9:03:17 AM GMT -05:00 US/Canada Eastern
Subject: [ham-radio-deluxe] Re: How to activate the "Distance" option in Logbook

 




Ruben

Thanks - worked great.

Howard

--- In ham-radio-deluxe@yahoogroups.com , Ruben Echevarria <ka2hhb_2000@...>
wrote:
>
> This was accomplished with the help of José Dumoulin F5JD.
> First thing to make clear is that the "ALE" of the Logbook is the one that is
used, not HRD or DM780.
> Click on your "Logbook" once it's up click on the green "ADD" icon, this
brings up the proper "ALE" go to
> "My Station" and fill in the blanks then click save. There are 10 save fields
choose #1 if you are or will be
> operating with different equipment then you can choose a different number and
save. Close the "ALE".
> This will be the information that your logbbook will be using.
> Once this is done you'll want to update and fill in the blank "Distance"
entries.
> To accomplish this bring up your logbook (you should see your entries), then
click Control+A this will
> tag all of your logbook entries by turning them all blue. Just above the
entries, there is a menu.
> Click the "More" dropdown button, select Bulk Editor/Distance & Heading. Click
Update. Click Finish.
> With F5JD's help I finally fixed my logbook as long as there is a locator
entry there will be a "Distance" entry.
> Many thanks to José Dumoulin F5JD for his help.
>
> Ruben Echevarria KA2HHB
> 070 Club#861 30MDG#1148
> 10-10#33308
>
> [Non-text portions of this message have been removed]
>




[Non-text portions of this message have been removed]

Hi,
When I come to install HRD, I find my transceiver FT-757GX is not listed. It
seems that the author assumes that we are all rich and only lists recent stuff.
Or, have I got it all wrong (again).
Best 73s.
Ron GW1HIN UK

Ruben

Thanks - worked great.

Howard

--- In ham-radio-deluxe@yahoogroups.com, Ruben Echevarria <ka2hhb_2000@...>
wrote:
>
> This was accomplished with the help of José Dumoulin F5JD.
> First thing to make clear is that the "ALE" of the Logbook is the one that is
used, not HRD or DM780.
> Click on your "Logbook" once it's up click on the green "ADD" icon, this
brings up the proper "ALE" go to
> "My Station" and fill in the blanks then click save. There are 10 save fields
choose #1 if you are or will be
> operating with different equipment then you can choose a different number and
save. Close the "ALE".
> This will be the information that your logbbook will be using.
> Once this is done you'll want to update and fill in the blank "Distance"
entries.
> To accomplish this bring up your logbook (you should see your entries), then
click Control+A this will
> tag all of your logbook entries by turning them all blue. Just above the
entries, there is a menu.
> Click the "More" dropdown button, select Bulk Editor/Distance & Heading. Click
Update. Click Finish.
> With F5JD's help I finally fixed my logbook as long as there is a locator
entry there will be a "Distance" entry.
> Many thanks to José Dumoulin F5JD for his help.
>
> Ruben Echevarria KA2HHB
> 070 Club#861 30MDG#1148
> 10-10#33308
>
> [Non-text portions of this message have been removed]
>

This was accomplished with the help of José Dumoulin F5JD.
First thing to make clear is that the "ALE" of the Logbook is the one that is
used, not HRD or DM780.
Click on your "Logbook" once it's up click on the green "ADD" icon, this brings
up the proper "ALE" go to
"My Station" and fill in the blanks then click save. There are 10 save fields
choose #1 if you are or will be
operating with different equipment then you can choose a different number and
save. Close the "ALE".
This will be the information that your logbbook will be using.
Once this is done you'll want to update and fill in the blank "Distance"
entries.
To accomplish this bring up your logbook (you should see your entries), then
click Control+A this will
tag all of your logbook entries by turning them all blue. Just above the
entries, there is a menu.
Click the "More" dropdown button, select Bulk Editor/Distance & Heading. Click
Update. Click Finish.
With F5JD's help I finally fixed my logbook as long as there is a locator entry
there will be a "Distance" entry.
Many thanks to José Dumoulin F5JD for his help.

Ruben Echevarria KA2HHB
070 Club#861 30MDG#1148
10-10#33308

[Non-text portions of this message have been removed]

I now use DXBase 2007 for my main logbook and I use the QSO Fowarding
feature
in DM780 to send my digital QSO logging over to DXBase. Just in the last few
weeks
I have noticed that when I have the QSO Fowarding turned on, DM780 does NOT
send
the contact to the HRDLogbook. I would like for the contact to be logged in
DXBase 2007
and also HRDLogbook because as a few more features are added and bugs fixed
I may
want to switch to HRDLogbook as my main logbook. I may be wrong (I was once)
but I
would consider this as a bug and not by design.

73 de Tony, KD4K



[Non-text portions of this message have been removed]

Jay

We go

Mike
   ----- Original Message -----
   From: Jay Farlow
   To: ham-radio-deluxe@yahoogroups.com
   Sent: Tuesday, November 24, 2009 4:19 PM
   Subject: [ham-radio-deluxe] Re: Delayed CAT response



   Update: The replacement cable from eBay vendor "qmall" arrived today. It
   exhibits the same problem as the original cable - that is, intermittent
   connection to the radio. The ZLP cable, on the other hand, keeps the radio's
   CAT indicator on all the time.

   So, it would appear that qmall's CAT cable for the FT-900 has a design flaw
   - probably in the USB-to-serial interface section.

   I'm really happy with the combination of ZLP's USB-to-serial interface cable
   and serial-to-CAT cable. They just work! I wish I'd bought them to start
   with.

   73,

   Jay, WB9MDS

   [Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

Update: The replacement cable from eBay vendor "qmall" arrived today. It
exhibits the same problem as the original cable - that is, intermittent
connection to the radio. The ZLP cable, on the other hand, keeps the radio's
CAT indicator on all the time.



So, it would appear that qmall's CAT cable for the FT-900 has a design flaw
- probably in the USB-to-serial interface section.



I'm really happy with the combination of ZLP's USB-to-serial interface cable
and serial-to-CAT cable. They just work! I wish I'd bought them to start
with.



73,



Jay, WB9MDS





[Non-text portions of this message have been removed]

José



     In my log book, under station, I have all the correct infomation placed
in the boxes, and I did hit the save button .  But the "Distance" showing on
the log page for all my contacts is still a "0".  When I make a contact in
DM780 I see the "Locator" and the "D istanc e" top left , and when I sign with
the station, that infomation is not transfered to the log book.



73, Robert

KF2GQ


[Non-text portions of this message have been removed]

Let me repeat what I said before. Distance and bearings are displayed correctly
if you have a valid locator in the "My Station" field of the logbook and if your
contact has one.

Ruben, KA2HHB, sent me a screenshot showing his locator in DM780. Not he right
place.

José F5JD

--- In ham-radio-deluxe@yahoogroups.com, purrins1@... wrote:
>
>
>
> I have followed the thread about distance on the log book.  I am able to get
the "locator's" to show on the log book page, but the distance in miles from me
to them is showing as a zero "0" in all the columns.  How do I get anything
but a "0" to show in the log book?
>
>
>
> 73, Robert
>
> KF2GQ
>
>
> [Non-text portions of this message have been removed]
>

I all,
 
I am running W7 64 and have only had problems with some drivers which are now
working, i only have 7 running not XP or Vista.
 
Good luck
 
Richard

--- On Mon, 23/11/09, George H Hughes <ghhughes@...> wrote:


From: George H Hughes <ghhughes@...>
Subject: Re: [ham-radio-deluxe] HRD With Windows 7
To: ham-radio-deluxe@yahoogroups.com
Date: Monday, 23 November, 2009, 18:37


 



My system runs fine as described. I have not desire to fiddle with a working
system. Not a wise idea with over 35 years experience with PC computers. I have
seen it all.
de AF4GH

----- Original Message -----
From: Tony
To: ham-radio-deluxe@ yahoogroups. com
Sent: Monday, November 23, 2009 9:52 AM
Subject: RE: [ham-radio-deluxe] HRD With Windows 7

FWIW, There is MUCH difference in having your account set for administrator
permission and
Running a program with administrator permission(right click program .exe
then click
"Run as Administrator" ).

73 de Tony, KD4K

-----Original Message-----
From: ham-radio-deluxe@ yahoogroups. com
[mailto:ham-radio-deluxe@ yahoogroups. com] On Behalf Of George H Hughes
Sent: Sunday, November 22, 2009 10:55 PM
To: ham-radio-deluxe@ yahoogroups. com
Subject: Re: [ham-radio-deluxe] HRD With Windows 7

I run Windows 7 64 bit home premium and have not problems at all with HRD
and DM780 V5 and the latest build.
Try going into the folder where the HRD and DM780 are installed and right
click on the executable program (.exe extension) then under properties click
the "compatibility tab). Put a check in the box and it should say (XP SP3
compatible).
Now I haven't had any of these problems. But I must tell you that the
account that I use when I log into my computer is set up with administrator
permissions. .....
de AF4GH

----- Original Message -----
From: Ira KE4EX
To: ham-radio-deluxe@ yahoogroups. com
Sent: Sunday, November 22, 2009 12:50 PM
Subject: Re: [ham-radio-deluxe] HRD With Windows 7

Hi Ron,
I have win 7 and HRD
I am unable to get HRD to even open.
I have ran several digital soft programs, (i.e. mutipsk-Hamsoft) w/no
problem.
I have Signalink USB and from the that point on all is well.
As a matter of fact I can somewhat run DM780.
I even tried V5 HRD forget it.
I have sent an email feed back to HRD
Let me know if you get lucky.
Ke4ex@hughes. net
Best Regards
Ira KE4EX

From: uk_microguy
Sent: Sunday, November 22, 2009 10:33 AM
To: ham-radio-deluxe@ yahoogroups. com
Subject: [ham-radio-deluxe] HRD With Windows 7

Hi,
I find I cannot run HRD with Widows 7 64bit Proff. has anone else had
problems please.
Ron GW1HIN

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------ --------- --------- ------

--- S u p p o r t H R D ---
Please visit http://www.ham- radio.ch/ donations. htm to sponsor the HRD
development. Yahoo! Groups Links

[Non-text portions of this message have been removed]











[Non-text portions of this message have been removed]

My system runs fine as described.  I have not desire to fiddle with a working
system.  Not a wise idea with over 35 years experience with PC computers.  I
have seen it all.
de AF4GH


   ----- Original Message -----
   From: Tony
   To: ham-radio-deluxe@yahoogroups.com
   Sent: Monday, November 23, 2009 9:52 AM
   Subject: RE: [ham-radio-deluxe] HRD With Windows 7




   FWIW, There is MUCH difference in having your account set for administrator
   permission and
   Running a program with administrator permission(right click program .exe
   then click
   "Run as Administrator").

   73 de Tony, KD4K


   -----Original Message-----
   From: ham-radio-deluxe@yahoogroups.com
   [mailto:ham-radio-deluxe@yahoogroups.com] On Behalf Of George H Hughes
   Sent: Sunday, November 22, 2009 10:55 PM
   To: ham-radio-deluxe@yahoogroups.com
   Subject: Re: [ham-radio-deluxe] HRD With Windows 7

   I run Windows 7 64 bit home premium and have not problems at all with HRD
   and DM780 V5 and the latest build.
   Try going into the folder where the HRD and DM780 are installed and right
   click on the executable program (.exe extension) then under properties click
   the "compatibility tab). Put a check in the box and it should say (XP SP3
   compatible).
   Now I haven't had any of these problems. But I must tell you that the
   account that I use when I log into my computer is set up with administrator
   permissions......
   de AF4GH

   ----- Original Message -----
   From: Ira KE4EX
   To: ham-radio-deluxe@yahoogroups.com
   Sent: Sunday, November 22, 2009 12:50 PM
   Subject: Re: [ham-radio-deluxe] HRD With Windows 7

   Hi Ron,
   I have win 7 and HRD
   I am unable to get HRD to even open.
   I have ran several digital soft programs, (i.e. mutipsk-Hamsoft) w/no
   problem.
   I have Signalink USB and from the that point on all is well.
   As a matter of fact I can somewhat run DM780.
   I even tried V5 HRD forget it.
   I have sent an email feed back to HRD
   Let me know if you get lucky.
   Ke4ex@...
   Best Regards
   Ira KE4EX

   From: uk_microguy
   Sent: Sunday, November 22, 2009 10:33 AM
   To: ham-radio-deluxe@yahoogroups.com
   Subject: [ham-radio-deluxe] HRD With Windows 7

   Hi,
   I find I cannot run HRD with Widows 7 64bit Proff. has anone else had
   problems please.
   Ron GW1HIN

   [Non-text portions of this message have been removed]

   [Non-text portions of this message have been removed]

   ------------------------------------

   --- S u p p o r t H R D ---
   Please visit http://www.ham-radio.ch/donations.htm to sponsor the HRD
   development.Yahoo! Groups Links





[Non-text portions of this message have been removed]

All:



Ebay vendor "qmall" wrote that they'd sent a replacement for their
apparently defective cable. As of today, (more than 20 days later) it has
not arrived.



So, last week, I ordered a CAT cable and USB interface from ZLP. It arrived
today and works perfectly.



Thus, we have confirmed that the problem was with qmall's cable. What we
don't know is whether qmall's cables have a design flaw that makes them all
unreliable, or if I just got a bad one.



If qmall's replacement cable ever arrives, I'll give it a try and report the
results here.



Thanks to all who attempted to help me solve this problem!



73,



Jay, WB9MDS







From: Jay Farlow [mailto:wb9mds@...]
Sent: Thursday, October 29, 2009 9:08 PM
To: ham-radio-deluxe@yahoogroups.com
Subject: RE: [ham-radio-deluxe] Delayed CAT response





Thanks, Simon. In case you didn't see, I have a replacement adapter on the
way (of the same model I'm having trouble with). If the replacement works
fine, that'll indicate that my problem all along was hardware failure and
I'll be sure to let you know.

In the interim, if you want to see my PortMon log, let me know and I'll send
it to you.

73,

Jay, WB9MDS

From: Simon (HB9DRV) [mailto:simon.brown@...
<mailto:simon.brown%40kns.ch> ]
Sent: Thursday, October 29, 2009 5:16 PM
To: ham-radio-deluxe@yahoogroups.com
<mailto:ham-radio-deluxe%40yahoogroups.com>
Subject: Re: [ham-radio-deluxe] Delayed CAT response

I'm hoping to be able to test this next week, shack's a mess at the moment.

Simon HB9DRV
http://sdr-radio.com

--------------------------------------------------
From: "Jay Farlow" <wb9mds@... <mailto:wb9mds%40arrl.net>
<mailto:wb9mds%40arrl.net> >
>
> Good work finding the alternative driver. I hope it works for you. It
> hasn't
> solved my problem (I still wait up to 10 seconds for a change made in HRD
> to
> show up on the radio), which might support the idea that there's a problem
> with the circuitry in my cable.
>

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

Tried that also and would not run.
Dan




________________________________
From: Tony <kd4k@...>
To: ham-radio-deluxe@yahoogroups.com
Sent: Mon, November 23, 2009 6:52:44 AM
Subject: RE: [ham-radio-deluxe] HRD With Windows 7

 

FWIW, There is MUCH difference in having your account set for administrator
permission and
Running a program with administrator permission(right click program .exe
then click
"Run as Administrator" ).

73 de Tony, KD4K


-----Original Message-----
From: ham-radio-deluxe@ yahoogroups. com
[mailto:ham-radio-deluxe@ yahoogroups. com] On Behalf Of George H Hughes
Sent: Sunday, November 22, 2009 10:55 PM
To: ham-radio-deluxe@ yahoogroups. com
Subject: Re: [ham-radio-deluxe] HRD With Windows 7

I run Windows 7 64 bit home premium and have not problems at all with HRD
and DM780 V5 and the latest build.
Try going into the folder where the HRD and DM780 are installed and right
click on the executable program (.exe extension) then under properties click
the "compatibility tab). Put a check in the box and it should say (XP SP3
compatible).
Now I haven't had any of these problems. But I must tell you that the
account that I use when I log into my computer is set up with administrator
permissions. .....
de AF4GH

----- Original Message -----
From: Ira KE4EX
To: ham-radio-deluxe@ yahoogroups. com
Sent: Sunday, November 22, 2009 12:50 PM
Subject: Re: [ham-radio-deluxe] HRD With Windows 7

Hi Ron,
I have win 7 and HRD
I am unable to get HRD to even open.
I have ran several digital soft programs, (i.e. mutipsk-Hamsoft) w/no
problem.
I have Signalink USB and from the that point on all is well.
As a matter of fact I can somewhat run DM780.
I even tried V5 HRD forget it.
I have sent an email feed back to HRD
Let me know if you get lucky.
Ke4ex@hughes. net
Best Regards
Ira KE4EX

From: uk_microguy
Sent: Sunday, November 22, 2009 10:33 AM
To: ham-radio-deluxe@ yahoogroups. com
Subject: [ham-radio-deluxe] HRD With Windows 7

Hi,
I find I cannot run HRD with Widows 7 64bit Proff. has anone else had
problems please.
Ron GW1HIN

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------ --------- --------- ------

--- S u p p o r t H R D ---
Please visit http://www.ham- radio.ch/ donations. htm to sponsor the HRD
development. Yahoo! Groups Links







[Non-text portions of this message have been removed]

I tried that also. I was the only account on the computer and was set up as
administrator. It was that way on Vista 64 bit, also which is where I set it up
origionaly. When I upgraded to Windows 7 64 bit I was still the only account on
the computer and was administrator. Under windows 7 HRD would run fine but when
I licked on DM-780 nothing would happen. The cursor would chance for a couple
seconds and then nothing. No error message or anything. I tried running it from
the start menu also and nothing. I did as someone suggested and set up another
account for me as a regular user and now HRD and DM-780 run fine if I log on to
the computer as a regular user and not as administrator. Don't understand that
but I have it up and running.
Dan W6DAW




________________________________
From: George H Hughes <ghhughes@...>
To: ham-radio-deluxe@yahoogroups.com
Sent: Sun, November 22, 2009 7:54:44 PM
Subject: Re: [ham-radio-deluxe] HRD With Windows 7

 
I run Windows 7 64 bit home premium and have not problems at all with HRD and
DM780 V5 and the latest build.
Try going into the folder where the HRD and DM780 are installed and right click
on the executable program (.exe extension) then under properties click the
"compatibility tab). Put a check in the box and it should say (XP SP3
compatible).
Now I haven't had any of these problems. But I must tell you that the account
that I use when I log into my computer is set up with administrator permissions.
.....
de AF4GH

----- Original Message -----
From: Ira KE4EX
To: ham-radio-deluxe@ yahoogroups. com
Sent: Sunday, November 22, 2009 12:50 PM
Subject: Re: [ham-radio-deluxe] HRD With Windows 7

Hi Ron,
I have win 7 and HRD
I am unable to get HRD to even open.
I have ran several digital soft programs, (i.e. mutipsk-Hamsoft) w/no problem.
I have Signalink USB and from the that point on all is well.
As a matter of fact I can somewhat run DM780.
I even tried V5 HRD forget it.
I have sent an email feed back to HRD
Let me know if you get lucky.
Ke4ex@hughes. net
Best Regards
Ira KE4EX

From: uk_microguy
Sent: Sunday, November 22, 2009 10:33 AM
To: ham-radio-deluxe@ yahoogroups. com
Subject: [ham-radio-deluxe] HRD With Windows 7

Hi,
I find I cannot run HRD with Widows 7 64bit Proff. has anone else had problems
please.
Ron GW1HIN

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]

Right that's my problem too. Jose did respond but his response made no
difference. 
Although it would be nice if it worked I just left it alone... 
 Ruben Echevarria KA2HHB
070 Club#861 30MDG#1148
10-10#33308




________________________________
From: "purrins1@..." <purrins1@...>
To: ham-radio-deluxe <ham-radio-deluxe@yahoogroups.com>
Sent: Mon, November 23, 2009 7:52:16 AM
Subject: [ham-radio-deluxe] distance in either K's or Miles

 


I have followed the thread about distance on the log book.  I am able to get the
"locator's" to show on the log book page, but the distance in miles from me to
them is showing as a zero "0" in all the columns.  How do I get anything but a
"0" to show in the log book?

[Non-text portions of this message have been removed]

I use different My Station settings for each QTH. I have only lived in 1
location since I got my license but I operate /4 when I visit my in-laws in NC
and bring equipment there. I also used K2DSL/140 during the ARRL special event
and have stations logged as that. They are all combined into a single logbook.

I still don't think there's an easy "batch" update to the My Station info in v4
or v5, but what you might be able to do, and how I batch update my contest
entries when importing from N1MM, is to use the HRD Utilities program from
WD5EAE. You'd probably want to export the unique locations (ADIF + HRD as the
export type) into their own logbook temporarily and then using the Logbook
Update utility in his program, update all the records. Then export them (ADIF +
HRD) and import them all into a common HRD DB.

You can download the program off Stephen's pages at
http://wd5eae.org/Software.html

If the above sounds too daunting, contact me directly and I'll see how I can
help walk you through the specific steps.

K2DSL - David
david@...

--- In ham-radio-deluxe@yahoogroups.com, "Randy" <wb8art@...> wrote:
>
> What is the groups recommendation on logging multiple QTH's I have lived at
over the years.  Is it best to start a new database for each home location or
other?
>
> Thanks
> Randy
>