Popular APRS Tracker "FoxTrak", is now available as a module with 0.1inch headers instead of D9 Connectors. Although specifically designed for forth coming...
first let me say, great kit. I am trying to get my local Raynet group interested in bulding a few of these. I did end up with 1 spare 0.1uf cap (5 in the bag,...
Hi all: I am waiting for my kit to arrive, and have a question for the group. I hope to use this with my Thinkpad T22 which has Windows XP Pro SP2 installed....
New Programming Board PB2, consist of 40, 20 & 18pin ZIF sockets. Design is similar to PB1 otherwise. Board is suitable(fully compitable) with PICKIT2, FD-ICP...
A new project: FoxDigi is uploaded with most documents. Please visit: http://www.foxdelta.com/products/foxdigi.htm FoxDigi is a Tracker/TNC/Modem for 1200baud...
OZ2Meter is a free program that displays the readings of the PM3 power meter on-screen in dBm. It runs on Win98, XP and Vista. Readings can also be passed to...
A new project: FoXview2 is almost completed & tested. FoxView2 includes an LCD Viewer and a choice of tracker module. Foxview2 may address following (With...
Hello Friends in Japan have put up a nice display of Fox Delta Kits at Ham Fair. Kits are specially selected for APRS related activities. Kindly visit web page...
Long awaited, sound card interface kits are now available. SC2 supports COR isolation useful for echolink. Pls visit : http://www.foxdelta.com/products/sc2.htm...
hi i am configuring my Foxdigi, when i apply 12vdc the PWR and REc are On. why the REC is alway on?? even after programmation,when i connect the 12vdc it stays...
hi all i connected on the pin7 of J3 :12vdc H1 is Right selected to gave 5vdc at the GPS. no light are ON the Foxtrak, the 5 vdc onboard regulator is working...
Hello Looking to great interest on FoxDigi project & demand for simple single sided PCB design, I have tried to make one. Single Sided designs are tough but i...
TinyEcho project is now updated. PCBs and Kits are available. New interface uses RJ45 connector for transceiver and high quality bourns SMT transformers. ...
I have just found that D9M connectors supplied with few ST3 and FoxDigi kits had wrong pin numbers on connectors. Kindly ignore it as consider standard pinout...
A new plug-in module for FoxView2 is ready, called "VixenTrak"!! Its a simple PIC88 based GPS-less (or with GPS!) position encoder preliminary designed for...
During the last of week august-08, I shipped couple of ST3 assembled. I am very upset with the fact that they were not assembled or tested properly, resulting...
Hello I am happy to inform all of you, waiting for a long, that FoxView2 Kits are finally ready. http://www.foxdelta.com/products/foxview2.htm Its available...
Hi Dinesh, The club has just received the ST3 from you, nice bit of kit. I have tested the operation through satpc32 and the little test board supplied, very...
Hi Dinesh, Hi all, Just received the Fox Digi and got it up and running for a couple of days as a stand alone digi. It works fine, but I canīt figure out how...
Hello everyone, I just wanna ask, Can the Foxdigi connect to PC as a TNC to work with Uiview 32 & AGWPE. Now I'm using the sound card interface as a TNC. It...
Does anyone have the ST3 up and running with a G-5500? I can't get the ST3 to read 450 degrees using the test board. Also having trouble getting the 450...
ST2 Satellite Antenna Tracking Interface, with PIC16F876A and 2x16 LCD, was tested with good results and kits will be ready by 20th of Nov. Kindly visit...
I have built two of these over the past 2 evenings, and I have a problem. 1. Trace rcv never displays the debug output on either unit. 2. The receive led...
Hello Redesigned PM3A is now ready and all documents & schematics posted at: http://www.foxdelta.com/products/pm3.htm Kits are expected to be ready within...
Hello FoxTrak kits dispatched between 9th & 16th Nov were sent with 78L05 in place of BC547B. I regret for this error and will dispatch BC547B by tomorrow, to...
Hello I regret that Fox Delta Web site is off due to Bandwidth limit. I have 30GB of BW which is used by Fox. This will last till midnight of 30th but I will...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
