Anybody have any of those square headed, 1/2"NPT ,ball check ,vented, pipe plugs for the Hayes Masters typically found on 24's? Do you all suppose White Post...
Hi All, Although I have been lurking around here for quite awhile I just aquired a 1940 24W project (thanks again mike e) all the repair work has been done...
Rick, Congratulations of the new bird. Hope all goes well. I live a LONG way from Mobile, but would be happy to take any specific pictures that you want. We...
Rick Send me your E-mail add.. & phone number I will give you a call. We can Help you out. John brendt Pres. Fairchild Club ... From: blinddog36451 To:...
I have a homemade can which I think doesn't do a good job.(Still a lot of oildrops out of the vent tube) so I want to replace it with a proven unit that will...
I need all the info I can find on replacing, rebuilding, repairing or manufacturing a camm shaft for a Menasco D7. Any help or ideas would be greatly...
The M-20 is STC'd for the Fairchild series. I have one each on my Cub & Luscombe, & think they're great. Not cheap though. see: www.m-20turbos.com Good luck! ...
Bob does seem to be the 'Master'. His mobile is 207 359 4445 last I knew. I believe he spends most of the summer and early fall up in Maine which may be why...
My 24W just left Paso Robles for Haywood where it will be containerized & shipped to Europe. On the two hour flight, the pilot reported the rigging was...
Steve, I'm just now finishing a month long re-rigging of my Temco R46. I've got a couple more test flights to accomplish. I should have some info for you in a...
Great! I really appreciate any help youcan provide on this. Steve Whelan Tom Mueller <tommuell@...> wrote: Steve, I'm just now finishing a month long...
Bob, Thanks for your wisdom. I'll probably stick with the struts on the same side & go form there. I saw the dihedral & incidence comment in the books. ...
Bob, Some planes have their right wing set at a higher angle of incidence then the left. This is to offset the left turning tendency. Also on some the ...
CarlMauro@...
Sep 8, 2007 3:17 pm
5647
Correct me if I'm wrong here..... A higher degree of incidence (or angle of attack, or wash in) on the starboard wing would only exacerbate attempts to correct...
I have 2 bendix DFA mags that were overhauled by Savage Mag, and set up as autoadvance. Does any one know the routine to set these to the Warner 165?...
After talking to Al at Savage mag, and Forest Lovely I found that the timimg is set at 13 degres before TDC on compression stroke and the mags will advance 15...
This is a little off topic but... Does anyone have any of the old style canister type spark plug shields lying around for a C-85? A friend needs 2 for her...
Call Fresno Airparts. They have them for Ercoupes. I used one for my Vagabond. It works well and only needs a touch of modification for the spark plug lead...
set the Warner 165 to 13 BTDC,#1, set the mag to point opening on #1 and install. adjust the timing to open the points to 13 BTDC wiht the regular timing...
lusc1863 <ehfk@...> Comment from user: Member/pilot of Early Birds Fndn (see www.vroegevogels.org). Fairchild is a totally restored 1939 24R-9. Trying to...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
