When I rebuilt the Rearwin I installed a Microair 760 as the reviews of it were good. How wrong I was! The thing was appalling and has now ceased to work. ...
I have a set of Edo 2880 (not 2870)floats with rigging certified for a Fairchild 24. These are extremely rare and are also certified for a few Waco biplane...
Giday Melvyn. I've always had good experience with PS Engineering's intercom system and the VAL 760 radio seems to get good reports too at around $600. Ebay...
Gentlemen, I have had a 760 Microair Transceiver in my open cockpit PT 19 since August of 2000. It has worked Flawlessly since then serving as a intercom as...
... ever, ... I have used a 760 it has worked great. I would trouble shoot the antenna co-ax, antenna and make very sure the antenna ground plane is of the...
Six each 4.125 inch standard dimension cylinders overhauled by Harrison Engine Service. Yellow tagged serviceable with intake and sodium exhaust valves...
Thanks for your comments guys. It is interesting to see that some of you have positive experience with the M760. I wonder if they are different over here or if...
Does anyone have a good way to comply with the wing spar inspection (AD) on the PT-19 without having to cut holes in the fabric? Any Official references would...
If you're asking about an alternate method of compliance, there is none. You have to perform the requirements of the AD as written with reference to the...
Dear Sir, I am an aero-modeller from Slovakia-eu and I am interested about F24 R with ''long nose'' I think powered with Ranger L-440-C5 I just start to build...
I am look to by a new set of electronics for my F-24. I am not out for a fancy set. I got over the need for bells & whistles a long time ago. If I thought I...
_rletter@..._ (mailto:rletter@...) First, do you have an F-24 with the hump instrument panel? That is what mine is in a 1940 F-24W40. When I...
EarlN28645@...
Nov 12, 2006 8:31 pm
5047
Hi Guys Thanks for all the halp in the past . Does any one have or know where to get one ? The hole is in the a/c (f24 wing) and i have the switch, but no...
I have a Grimes retract. I'd have to go to my hangar to get the model number and size. Got with a bunch of Bellanca parts. Cy Galley - Bellanca Champion Club ...
Subject: Re: [fairchildclub] Landing light required. Checked the hangar... I have a Grimes G-3100 retracting 12v light. Bulb is 8" in diameter (PAR64),...
Hi My F24 is 28 volt can this scupper our plans? cgalley <cgalley@...> wrote: Subject: Re: [fairchildclub] Landing light required. Checked the hangar... I...
Yes, Mine is a '46 model, with the hump. I have an old an old Mk 12B, but I am not sure that I want the use it. I was serviceable when I removed it from a...
We are installing an ICOM 200(?) Nav/comm in N81229. It is light weight, has a built-in intercom and flip/flop frequency capability. Don't know that we need...
Does anyone having lying around two Main wheel axle nut dust covers for the gear on the PT-19 that they want to sell? If not any idea where one might get them?...
Hello All, I am in the process of rebuilding my 24G after ground looping it, and I am planning to replace the free-pivoting tailwheel with a steerable...
(See the following link for pictures of it and of my aircraft) [LINK CORRECTED -- SORRY] http://members.cox.net/dcasali/ Dan Casali -- Dan Casali MacWizard Box...
We have our wheel pants off again for annual - looking at the Idaho airplane pictures brings me to think that we may choose to leave the wheel pants off IF we...
I have several. I suppose that you would like 8 of them? I will need your shipping address. Use the E-mail address shown below. The earliest that I can send...
I had seen this very conversion (Scott 3200) on a F24, liked it, bought records on CD from FAA, no mention of conversion in records. I won't say anymore on...
Hi Chief! If you mean the little 1.5 in square rubber shock mounts, I have some new ones excess to our restoration How many are you looking for? Jim C. SMsgt...
4...where are you located-? THX Dick Russell, CMS, USAF (Retired) DNR Aviation, LLC (Home of the 2007 Meyers Owners Reunion) Checking Six and Flying safe in...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
