Having problems with message search?
Just had a look and there is about 2mm difference on bolt
centres between the 38 and 32mm spinners so swapping hubs may not be a straight
forward job and sanding the cone down to 36 or 32mm will mean re-mounting the
hub in the cone. Not a impossible job but more than 5 minutes work.
From: f5b_uk@yahoogroups.com
[mailto:f5b_uk@yahoogroups.com] On Behalf Of Alan
Sent: 01 July 2009 09:30
To: f5b_uk@yahoogroups.com
Subject: [f5b_uk] RFM Spinners
Was
going to be putting in an order for offset RFM spinners
shortly. Is anyone interested in the below at the
moment? As far as I know (can measure) the hub size between
the 32 and 36/38 spinners is the same. Just a bigger cone on the
front. So in theory the 38mm cone can be sanded
down to 32mm.
We have the 32mm Spinner only in 5° and 7°
The 2° and 9° Spinner are only in 38mm
available.
I
asked about the Surprise XVI but got no reply to that.
Checked by
AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.0/2209 - Release Date: 06/29/09
14:43:00
Offline 
Send Email