Skip to search.

Breaking News Visit Yahoo! News for the latest.

×Close this window

dxatlas_group · DX Atlas Group

The Yahoo! Groups Product Blog

Check it out!

Group Information

  • Members: 1095
  • Category: Shortwave
  • Founded: Aug 14, 2002
  • Language: English
? Already a member? Sign in to Yahoo!

Yahoo! Groups Tips

Did you know...
Message search is now enhanced, find messages faster. Take it for a spin.

Messages

Advanced
Messages Help
Messages 976 - 1010 of 2481   Oldest  |  < Older  |  Newer >  |  Newest
Messages: Show Message Summaries Sort by Date ^  
#976 From: "N6KK" <barger@...>
Date: Fri Aug 1, 2008 6:40 am
Subject: IonoProbe and Internet Proxy
N6KK
Send Email Send Email
 
I'm using IonoProbe 1.36 behind an Internet proxy that requires
authentication (user name and password).  I have two computers running
XP Pro (both with all updates) and IE 7 (latest version).  On one
computer IonoProbe is very happy grabbing the proxy settings from IE
and updates regularly.  The other (set up identically as far as I can
tell) will not update at all.  With either manual or automatic
updates, a red X in the lower right hand corner of the IonoProbe is
displayed almost immediately.  Other programs on the same computer
that are configured to use the IE proxy settings (such as DX Monitor)
work very well.

Does anyone have an idea what to check for at this point?  There are
hardware differences (one is a laptop and the other is an older HP
desktop), but the software (excluding hardware drivers of course)
should be the same.  But there could be some subtle configuration
somewhere that I haven't found (or is inaccessible).

Thanks for any help tracking this down.  It's driving me nuts!

joe n6kk

#977 From: "haircutter14085" <haircutter@...>
Date: Sun Aug 3, 2008 1:01 pm
Subject: not on freq
haircutter14085
Send Email Send Email
 
I am using the K3 and the E-MU soundcard with the cw-skimmer. When
using the cw-skimmer the call signs are about 3 kc off freq. Is there a
way to correct this?

Don..w2xb

#978 From: Pete Smith <n4zr@...>
Date: Sun Aug 3, 2008 1:25 pm
Subject: Re: [dxatlas] not on freq
n4zr
Send Email Send Email
 
What mode are you using Skimmer in?

73, Pete N4ZR

At 09:01 AM 8/3/2008, you wrote:
>I am using the K3 and the E-MU soundcard with the cw-skimmer. When
>using the cw-skimmer the call signs are about 3 kc off freq. Is there a
>way to correct this?
>
>Don..w2xb
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>

#979 From: "haircutter14085" <haircutter@...>
Date: Sun Aug 3, 2008 1:46 pm
Subject: Re: [dxatlas] not on freq
haircutter14085
Send Email Send Email
 
--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@...> wrote:
>
Morning Pete,
Cw mode on K3...

Don...



> What mode are you using Skimmer in?
>
> 73, Pete N4ZR
>
> At 09:01 AM 8/3/2008, you wrote:
> >I am using the K3 and the E-MU soundcard with the cw-skimmer. When
> >using the cw-skimmer the call signs are about 3 kc off freq. Is
there a
> >way to correct this?
> >
> >Don..w2xb
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >
>

#980 From: Pete Smith <n4zr@...>
Date: Sun Aug 3, 2008 1:50 pm
Subject: Re: [dxatlas] not on freq
n4zr
Send Email Send Email
 
Sorry, I meant what Skimmer mode?

73, Pete

At 09:46 AM 8/3/2008, you wrote:
>--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@...> wrote:
> >
>Morning Pete,
>Cw mode on K3...
>
>Don...
>
>
>
> > What mode are you using Skimmer in?
> >
> > 73, Pete N4ZR
> >
> > At 09:01 AM 8/3/2008, you wrote:
> > >I am using the K3 and the E-MU soundcard with the cw-skimmer. When
> > >using the cw-skimmer the call signs are about 3 kc off freq. Is
>there a
> > >way to correct this?
> > >
> > >Don..w2xb
> > >
> > >
> > >------------------------------------
> > >
> > >Yahoo! Groups Links
> > >
> > >
> > >
> >
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>

#981 From: "haircutter14085" <haircutter@...>
Date: Sun Aug 3, 2008 1:57 pm
Subject: Re: [dxatlas] not on freq
haircutter14085
Send Email Send Email
 
--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@...> wrote:
>
Hi Pete,
Where on the skimmer is the mode? All I see is the band plan?


Don..





> Sorry, I meant what Skimmer mode?
>
> 73, Pete
>
> At 09:46 AM 8/3/2008, you wrote:
> >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@> wrote:
> > >
> >Morning Pete,
> >Cw mode on K3...
> >
> >Don...
> >
> >
> >
> > > What mode are you using Skimmer in?
> > >
> > > 73, Pete N4ZR
> > >
> > > At 09:01 AM 8/3/2008, you wrote:
> > > >I am using the K3 and the E-MU soundcard with the cw-skimmer.
When
> > > >using the cw-skimmer the call signs are about 3 kc off freq. Is
> >there a
> > > >way to correct this?
> > > >
> > > >Don..w2xb
> > > >
> > > >
> > > >------------------------------------
> > > >
> > > >Yahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >
>

#982 From: Pete Smith <n4zr@...>
Date: Sun Aug 3, 2008 2:23 pm
Subject: Re: [dxatlas] not on freq
n4zr
Send Email Send Email
 
On the very first tab - Radio. I'm guessing that perhaps you are running in
3-KHz mode, using the audio from your radio.  Or are you somehow connecting
to the IF output of the radio in an effort to use it more as a panadaptor?

73, Pete

At 09:57 AM 8/3/2008, you wrote:
>--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@...> wrote:
> >
>Hi Pete,
>Where on the skimmer is the mode? All I see is the band plan?
>
>
>Don..
>
>
>
>
>
> > Sorry, I meant what Skimmer mode?
> >
> > 73, Pete
> >
> > At 09:46 AM 8/3/2008, you wrote:
> > >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@> wrote:
> > > >
> > >Morning Pete,
> > >Cw mode on K3...
> > >
> > >Don...
> > >
> > >
> > >
> > > > What mode are you using Skimmer in?
> > > >
> > > > 73, Pete N4ZR
> > > >
> > > > At 09:01 AM 8/3/2008, you wrote:
> > > > >I am using the K3 and the E-MU soundcard with the cw-skimmer.
>When
> > > > >using the cw-skimmer the call signs are about 3 kc off freq. Is
> > >there a
> > > > >way to correct this?
> > > > >
> > > > >Don..w2xb
> > > > >
> > > > >
> > > > >------------------------------------
> > > > >
> > > > >Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >------------------------------------
> > >
> > >Yahoo! Groups Links
> > >
> > >
> > >
> >
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>

#983 From: "haircutter14085" <haircutter@...>
Date: Sun Aug 3, 2008 2:47 pm
Subject: Re: [dxatlas] not on freq
haircutter14085
Send Email Send Email
 
--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@...> wrote:
>
Hi Pete,
I'm using a external soundcard (emu 202) and the Lp-PAN and have the
softrock-if checked...

Don....


> On the very first tab - Radio. I'm guessing that perhaps you are
running in
> 3-KHz mode, using the audio from your radio.  Or are you somehow
connecting
> to the IF output of the radio in an effort to use it more as a
panadaptor?
>
> 73, Pete
>
> At 09:57 AM 8/3/2008, you wrote:
> >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@> wrote:
> > >
> >Hi Pete,
> >Where on the skimmer is the mode? All I see is the band plan?
> >
> >
> >Don..
> >
> >
> >
> >
> >
> > > Sorry, I meant what Skimmer mode?
> > >
> > > 73, Pete
> > >
> > > At 09:46 AM 8/3/2008, you wrote:
> > > >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@> wrote:
> > > > >
> > > >Morning Pete,
> > > >Cw mode on K3...
> > > >
> > > >Don...
> > > >
> > > >
> > > >
> > > > > What mode are you using Skimmer in?
> > > > >
> > > > > 73, Pete N4ZR
> > > > >
> > > > > At 09:01 AM 8/3/2008, you wrote:
> > > > > >I am using the K3 and the E-MU soundcard with the cw-
skimmer.
> >When
> > > > > >using the cw-skimmer the call signs are about 3 kc off
freq. Is
> > > >there a
> > > > > >way to correct this?
> > > > > >
> > > > > >Don..w2xb
> > > > > >
> > > > > >
> > > > > >------------------------------------
> > > > > >
> > > > > >Yahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >------------------------------------
> > > >
> > > >Yahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >
>

#984 From: Pete Smith <n4zr@...>
Date: Sun Aug 3, 2008 4:00 pm
Subject: Re: [dxatlas] not on freq
n4zr
Send Email Send Email
 
Ah, then take a look at the discussion of the softrock-if mode in the
Skimmer help file - particularly the part on setting the "audio if."

73, Pete N4ZR

At 10:47 AM 8/3/2008, you wrote:
>--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@...> wrote:
> >
>Hi Pete,
>I'm using a external soundcard (emu 202) and the Lp-PAN and have the
>softrock-if checked...
>
>Don....
>
>
> > On the very first tab - Radio. I'm guessing that perhaps you are
>running in
> > 3-KHz mode, using the audio from your radio.  Or are you somehow
>connecting
> > to the IF output of the radio in an effort to use it more as a
>panadaptor?
> >
> > 73, Pete
> >
> > At 09:57 AM 8/3/2008, you wrote:
> > >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@> wrote:
> > > >
> > >Hi Pete,
> > >Where on the skimmer is the mode? All I see is the band plan?
> > >
> > >
> > >Don..
> > >
> > >
> > >
> > >
> > >
> > > > Sorry, I meant what Skimmer mode?
> > > >
> > > > 73, Pete
> > > >
> > > > At 09:46 AM 8/3/2008, you wrote:
> > > > >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@> wrote:
> > > > > >
> > > > >Morning Pete,
> > > > >Cw mode on K3...
> > > > >
> > > > >Don...
> > > > >
> > > > >
> > > > >
> > > > > > What mode are you using Skimmer in?
> > > > > >
> > > > > > 73, Pete N4ZR
> > > > > >
> > > > > > At 09:01 AM 8/3/2008, you wrote:
> > > > > > >I am using the K3 and the E-MU soundcard with the cw-
>skimmer.
> > >When
> > > > > > >using the cw-skimmer the call signs are about 3 kc off
>freq. Is
> > > > >there a
> > > > > > >way to correct this?
> > > > > > >
> > > > > > >Don..w2xb
> > > > > > >
> > > > > > >
> > > > > > >------------------------------------
> > > > > > >
> > > > > > >Yahoo! Groups Links
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >------------------------------------
> > > > >
> > > > >Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >------------------------------------
> > >
> > >Yahoo! Groups Links
> > >
> > >
> > >
> >
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>

#985 From: "haircutter14085" <haircutter@...>
Date: Sun Aug 3, 2008 9:53 pm
Subject: Re: [dxatlas] not on freq
haircutter14085
Send Email Send Email
 
--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@...> wrote:
>

Hi Pete,
I will do that and let you know how I make out. Its strange. It was
working fb until I started playing around with Lp-Pan and the bridge
software. Tried uninstalling and doing it over. No Joy!

Do will let you know how I make out.


Thanks again my friend

Don...w2xb





> Ah, then take a look at the discussion of the softrock-if mode in
the
> Skimmer help file - particularly the part on setting the "audio if."
>
> 73, Pete N4ZR
>
> At 10:47 AM 8/3/2008, you wrote:
> >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@> wrote:
> > >
> >Hi Pete,
> >I'm using a external soundcard (emu 202) and the Lp-PAN and have
the
> >softrock-if checked...
> >
> >Don....
> >
> >
> > > On the very first tab - Radio. I'm guessing that perhaps you are
> >running in
> > > 3-KHz mode, using the audio from your radio.  Or are you somehow
> >connecting
> > > to the IF output of the radio in an effort to use it more as a
> >panadaptor?
> > >
> > > 73, Pete
> > >
> > > At 09:57 AM 8/3/2008, you wrote:
> > > >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@> wrote:
> > > > >
> > > >Hi Pete,
> > > >Where on the skimmer is the mode? All I see is the band plan?
> > > >
> > > >
> > > >Don..
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > Sorry, I meant what Skimmer mode?
> > > > >
> > > > > 73, Pete
> > > > >
> > > > > At 09:46 AM 8/3/2008, you wrote:
> > > > > >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@>
wrote:
> > > > > > >
> > > > > >Morning Pete,
> > > > > >Cw mode on K3...
> > > > > >
> > > > > >Don...
> > > > > >
> > > > > >
> > > > > >
> > > > > > > What mode are you using Skimmer in?
> > > > > > >
> > > > > > > 73, Pete N4ZR
> > > > > > >
> > > > > > > At 09:01 AM 8/3/2008, you wrote:
> > > > > > > >I am using the K3 and the E-MU soundcard with the cw-
> >skimmer.
> > > >When
> > > > > > > >using the cw-skimmer the call signs are about 3 kc off
> >freq. Is
> > > > > >there a
> > > > > > > >way to correct this?
> > > > > > > >
> > > > > > > >Don..w2xb
> > > > > > > >
> > > > > > > >
> > > > > > > >------------------------------------
> > > > > > > >
> > > > > > > >Yahoo! Groups Links
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >------------------------------------
> > > > > >
> > > > > >Yahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >------------------------------------
> > > >
> > > >Yahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >
>

#986 From: "haircutter14085" <haircutter@...>
Date: Sun Aug 3, 2008 11:26 pm
Subject: cw-skimmer and right freq
haircutter14085
Send Email Send Email
 
Hello Group,
Fixed the problem with the skimmer and syncing with the rig. went into
the lp-bridge and looked at the if freq that it was reading for the K3.
Changed the audio IF freq in the skimmer a couple times (up/dwn) All
working fine now...birdge showed 3200 for the if, I put -3200 in the
skimmer and it worked....

Don..w2xb

#987 From: "Marijan Miletic" <s56a@...>
Date: Mon Aug 4, 2008 8:29 pm
Subject: Re: [dxatlas] not on freq
s56a
Send Email Send Email
 
I am also experiencing occassional freq errors and I suspect they are
caused by manually turning FT-1000 RX2 VFO dial.  However, high
percentage of accurate callsigns and frequencies detected make a lot
of fun to operate Skimmer on both FT1K RX 455 kHz IF.  I am looking
forward to EU DX contest this weekend.  Only rotor needs fixing
again :-(

73 de Mario, S56A, N1YU


--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@...> wrote:
>
> Ah, then take a look at the discussion of the softrock-if mode in
the
> Skimmer help file - particularly the part on setting the "audio if."
>
> 73, Pete N4ZR
>
> At 10:47 AM 8/3/2008, you wrote:
> >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@> wrote:
> > >
> >Hi Pete,
> >I'm using a external soundcard (emu 202) and the Lp-PAN and have
the
> >softrock-if checked...
> >
> >Don....
> >
> >
> > > On the very first tab - Radio. I'm guessing that perhaps you are
> >running in
> > > 3-KHz mode, using the audio from your radio.  Or are you somehow
> >connecting
> > > to the IF output of the radio in an effort to use it more as a
> >panadaptor?
> > >
> > > 73, Pete
> > >
> > > At 09:57 AM 8/3/2008, you wrote:
> > > >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@> wrote:
> > > > >
> > > >Hi Pete,
> > > >Where on the skimmer is the mode? All I see is the band plan?
> > > >
> > > >
> > > >Don..
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > Sorry, I meant what Skimmer mode?
> > > > >
> > > > > 73, Pete
> > > > >
> > > > > At 09:46 AM 8/3/2008, you wrote:
> > > > > >--- In dxatlas_group@yahoogroups.com, Pete Smith <n4zr@>
wrote:
> > > > > > >
> > > > > >Morning Pete,
> > > > > >Cw mode on K3...
> > > > > >
> > > > > >Don...
> > > > > >
> > > > > >
> > > > > >
> > > > > > > What mode are you using Skimmer in?
> > > > > > >
> > > > > > > 73, Pete N4ZR
> > > > > > >
> > > > > > > At 09:01 AM 8/3/2008, you wrote:
> > > > > > > >I am using the K3 and the E-MU soundcard with the cw-
> >skimmer.
> > > >When
> > > > > > > >using the cw-skimmer the call signs are about 3 kc off
> >freq. Is
> > > > > >there a
> > > > > > > >way to correct this?
> > > > > > > >
> > > > > > > >Don..w2xb
> > > > > > > >
> > > > > > > >
> > > > > > > >------------------------------------
> > > > > > > >
> > > > > > > >Yahoo! Groups Links
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >------------------------------------
> > > > > >
> > > > > >Yahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >------------------------------------
> > > >
> > > >Yahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >
>

#988 From: "nc1john" <johnoberlin@...>
Date: Wed Aug 6, 2008 9:08 pm
Subject: Vista compatability?
nc1john
Send Email Send Email
 
Excuse me if I'm in the wrong place for this question.

I have a Vista laptop and went to dxatlas.com to try Faros and a
couple of related applications.  They won't start/run on my PC.  Is
this a known Vista incompatibility issue?  If so, is their an update
coming?  Thanks much.  If not, any advice?  Thanks.

#989 From: "Alex Shovkoplyas, VE3NEA" <alshovk@...>
Date: Wed Aug 6, 2008 10:40 pm
Subject: Re: Vista compatability?
alshovk
Send Email Send Email
 
Hi John,

Please see this posting for a detailed answer:
(http://groups.yahoo.com/group/dxatlas_group/message/777)

73 Alex VE3NEA



> Excuse me if I'm in the wrong place for this question.
>
> I have a Vista laptop and went to dxatlas.com to try Faros and a
> couple of related applications.  They won't start/run on my PC.  Is
> this a known Vista incompatibility issue?  If so, is their an update
> coming?  Thanks much.  If not, any advice?  Thanks.
>

#990 From: "Chris" <airguzzler@...>
Date: Thu Aug 7, 2008 8:52 pm
Subject: DXAtlas Display
ptbm134aox
Send Email Send Email
 
Hi Alex

I've been using both DXAtlas and HamCAP for some time now. I find the
psuedo-colour display in HamCAP very easy to see where the propagation
is working or not, and I like the estimator for which propagation mode
(ie. 1F2, 2F2, F2F2 etc) is most likely along a given path.

My question is:

Would it be possible to incorporate the psued-colour display and the
prop. mode into DXAtlas?

Keep up the excellent work.

Regards

Chris

#991 From: "rdvrey" <rdvrey@...>
Date: Thu Aug 7, 2008 10:10 pm
Subject: Re: [dxatlas] Omni-Rig and Logbooks
rdvrey
Send Email Send Email
 
Hi Dan,

I actually bought AAlog.

73,

Robert

--- In dxatlas_group@yahoogroups.com, "rdvrey" <rdvrey@...> wrote:
>
> Dear Dan
>
> I was hoping for a more sensible discussion. Actually we are much more
> alike then one would think. I almost wrote software for a 68008 system
> but it was to unstable. So I it became a 6809 and I wrote the Os in
> assembly and the user interface in Pascal. It was a real time 16
> channel reaction measurement system. 2 ms accurate.
> With Hamport I can do what I like. And the integration with the dx
> software does work rather needly. But it doesn't do a real time look
> up in qrz.com instead it can only use a cd. My guess is that this way
> the guys at qrz.com earn some money but then again one never has a up
> to date database this way.
>
> 73,
>
> Robert
>
> --- In dxatlas_group@yahoogroups.com, "Dan Schaaf" <dan-schaaf@> wrote:
> >
> > Dear Robert
> >
> > I understand completely. I will be interested to hear from you if
> the softwares works to your satisfaction. As I said previously, the
> HAMPORT window will do what you want, just not in the logger window.
> >
> > BTW, my rig is a Yaesu FT-920 and FT-897D with Tokyo HyPower
> amplifier. Enough internal computing power to get the job done.
> >
> > Yes, I do come from the old days of analog radios, licensed in 1963.
> Only last year did I purchase a CAT control radio (FT-920 and FT-897)
> for exactly that reason, CAT control. But 245 of my 295 countries
> worked were all done on an old FT-101ZD analog, tube radio.
> >
> > If you are interested, my credentials are:
> > My first company that I owned in 1996 was The Computer Doctor. I
> built computers for the underpriveleged kids in the Miami area to help
> them further their education.
> > In 1976, I built my own computer from scratch around a Motorola 6800
> processor , programmed it in Machine Code with an Assembler and wrote
> an operating system for it to drive a Pertec 5 track tape drive
> (Nibbles) which I rebuilt from 3 scrap drives.
> > Then I wrote the code to control az and el antenna control for Oscar
> satellite tracking.
> > Then I built the first telephone  modem that could be plugged into
> the computer motherboard buss. That done so that I could send my
> college assignments to the Professor by modem rather than drive 1 hour
> to the school. At General Instrument corp. myself and 2 other
> engineers designed the first Varactor tuned TV VHF/UHF tuner and the
> accompanying remote control to replace the rotary knob channel
> selectors on TVs.
> >
> > So, I am not totally out of touch with technology.
> >
> > Best Regards
> > Dan Schaaf
> > K3ZXL   www.k3zxl.com   "In the Beginning, there was Spark Gap"
> > ===============================
> > NOBSKA
> > www.nobska.net
> > ===============================
> > Cape Cod Instruments
> > www.oceanbiz.net
> > ===============================
> >
> >   ----- Original Message -----
> >   From: rdvrey
> >   To: dxatlas_group@yahoogroups.com
> >   Sent: Wednesday, July 02, 2008 7:31 PM
> >   Subject: Re: [dxatlas] Omni-Rig and Logbooks
> >
> >
> >   It might be that there is a difference in the way we work. You
like to
> >   work your way and I my way. Neither one is bad or better. My rig as
> >   any rig now a days has inbuilt intelligence that is far greater in
> >   computing power then the navigation computer of the Apollo that went
> >   to the moon. And the technical excellence that nowadays rigs have is
> >   due too computer added designing only. Unless you are working a old
> >   analog rig I can imagine your reaction. Since it has serial
> >   communication with a PC its not old. I belong to the generation that
> >   works with computers every day, and like to do so. If I want a
logbook
> >   that can do that so be it. Its for me to decide. If AAlog works for
> >   you I am happy for you but maybe it doesn't do that for me. I will
> >   test it and I had already downloaded it before your first comment.
> >
> >   --- In dxatlas_group@yahoogroups.com, "Dan Schaaf" <dan-schaaf@>
> wrote:
> >   >
> >   > Well, I applaud the advancements in digital automation and control
> >   on radios. However, when you watch videos of DXers and
DXPeditions in
> >   operation, the left hand is usually always on the VFO and the right
> >   hand is operating the keyboard and Morse Key. It is extremely
> >   efficient to have the VFO in hand when operating in pileups or
trying
> >   to pull out a weak signal. Don't get me wrong, I am sure that a
> >   skilled mouse operator can accomplish the same goals. But there is
> >   nothing like fine tuning the knob manually because you are
tuning for
> >   your ear, and the ear/brain combo likes analog moreso than digital.
> >   > And those DXers seem to have the radio in front of them and all
> >   other accessories offset from the radio.
> >   >
> >   > Anyway, to each his own. That is what makes this hobby unique.
> >   > But, I think you will like the AALog/BM/DXAtlas combo a suitable
> >   setup. It may mean that you have to adjust operating habits. Or
maybe
> >   the software that you are using presently is a better choice for
you.
> >   >
> >   > BTW, You need to download HAMPORT along with Omnirig. Hamport
is the
> >   actual interface between the BM and AALog and rig.Now, Hamport DOES
> >   allow you to incrementally change frequency in 10 Hz increments.
> >   >
> >   > Best Regards
> >   > Dan Schaaf
> >   > K3ZXL www.k3zxl.com "In the Beginning, there was Spark Gap"
> >   > ===============================
> >   > NOBSKA
> >   > www.nobska.net
> >   > ===============================
> >   > Cape Cod Instruments
> >   > www.oceanbiz.net
> >   > ===============================
> >   > ----- Original Message -----
> >   > From: rdvrey
> >   > To: dxatlas_group@yahoogroups.com
> >   > Sent: Wednesday, July 02, 2008 6:53 PM
> >   > Subject: Re: [dxatlas] Omni-Rig and Logbooks
> >   >
> >   >
> >   > Yep mine has too thats odd, seriously when your holding the
> mouse its
> >   > handy to continue doing that. And then there are short keys. My
> rig is
> >   > up 2 feet higer and its more convenient to have that feature on
> the PC
> >   > too.
> >   >
> >   > --- In dxatlas_group@yahoogroups.com, "Dan Schaaf" <dan-schaaf@>
> >   wrote:
> >   > >
> >   > > I use a knob on my radio labeled "VFO" for small adjustments
> after I
> >   > have clicked on a spot. It is much faster than playing around
with a
> >   > digital adjustment in the software.
> >   > >
> >   > > Best Regards
> >   > > Dan Schaaf
> >   > > K3ZXL www.k3zxl.com "In the Beginning, there was Spark Gap"
> >   > >
> >   > > ----- Original Message -----
> >   > > From: rdvrey
> >   > > To: dxatlas_group@yahoogroups.com
> >   > > Sent: Wednesday, July 02, 2008 5:43 PM
> >   > > Subject: Re: [dxatlas] Omni-Rig and Logbooks
> >   > >
> >   > >
> >   > > --- In dxatlas_group@yahoogroups.com, "Dan Schaaf" <dan-schaaf@>
> >   > wrote:
> >   > > >
> >   > > > You don't tune the rig from the logbook. You tune it by
> >   clicking on
> >   > > a cluster spot in Bandmaster and the rig tunes to that
> frequency and
> >   > > if the spot is split freq, then your rig VFO A and B are set
> >   > > accordingly. And the DX call sign is automatically inserted
> into the
> >   > > New QSO window of the log.
> >   > > >
> >   > > > And, when ever a station is spotted that you already
worked, BM
> >   > > shows it in Grey. If the country has never been workedand
> >   logged, then
> >   > > it shows in Red in BM. If it is a new station but not a new
> country,
> >   > > it is shown in black in BM.
> >   > > >
> >   > > > And, if the station is a LOTW user, the call sign is
underlined.
> >   > > >
> >   > > > Many good features. I have been using it for 3 years and
it has
> >   > > gotten me 295 countries in most bands in 3 years. Has saved me
> a lot
> >   > > of searching.
> >   > > >
> >   > > > Best Regards
> >   > > > Dan Schaaf
> >   > > > K3ZXL www.k3zxl.com "In the Beginning, there was Spark Gap"
> >   > > >
> >   > > > ----- Original Message -----
> >   > > > From: rdvrey
> >   > > > To: dxatlas_group@yahoogroups.com
> >   > > > Sent: Wednesday, July 02, 2008 5:21 PM
> >   > > > Subject: Re: [dxatlas] Omni-Rig and Logbooks
> >   > > >
> >   > > >
> >   > > > --- In dxatlas_group@yahoogroups.com, "Dan Schaaf"
<dan-schaaf@>
> >   > > wrote:
> >   > > > >
> >   > > > > AALog is the solution. It is integrated with DXAtlas and
> >   > Bandmaster.
> >   > > > go to www.DXSoft.com
> >   > > > >
> >   > > > >
> >   > > > > Best Regards
> >   > > > > Dan Schaaf
> >   > > > > K3ZXL www.k3zxl.com "In the Beginning, there was Spark Gap"
> >   > > > >
> >   > > > > ----- Original Message -----
> >   > > > > From: rdvrey
> >   > > > > To: dxatlas_group@yahoogroups.com
> >   > > > > Sent: Wednesday, July 02, 2008 5:07 PM
> >   > > > > Subject: [dxatlas] Omni-Rig and Logbooks
> >   > > > >
> >   > > > >
> >   > > > > Hi,
> >   > > > >
> >   > > > > I would to find a logbook program that uses omni-Rig because
> >   i am
> >   > > > > allready using Band master dx-atlas.
> >   > > > >
> >   > > > > Do you know of such programs.
> >   > > > >
> >   > > > > 73,
> >   > > > >
> >   > > > > Robert PE1CWU
> >   > > > >
> >   > > > >
> >   > > > >
> >   > > > >
> >   > > > >
> >   > > > > [Non-text portions of this message have been removed]
> >   > > > >
> >   > > > But does it retreive information from my rig?
> >   > > > Can I tune my rig from within the logbook ?
> >   > > > Like Log Window 4.5?
> >   > > >
> >   > > > 73,
> >   > > >
> >   > > > Robert
> >   > > >
> >   > > >
> >   > > >
> >   > > >
> >   > > >
> >   > > > [Non-text portions of this message have been removed]
> >   > > >
> >   > >
> >   > > Hi,
> >   > >
> >   > > Maybe I should explain better, Log Wondow allows for small
steps,
> >   > > since the ferquentie tuned to by band master might be slight of.
> >   > >
> >   > > 73,
> >   > >
> >   > > Robert
> >   > >
> >   > >
> >   > >
> >   > >
> >   > >
> >   > > [Non-text portions of this message have been removed]
> >   > >
> >   >
> >   >
> >   >
> >   >
> >   >
> >   > [Non-text portions of this message have been removed]
> >   >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>

#992 From: "Dave" <g0kth@...>
Date: Sat Aug 9, 2008 2:50 pm
Subject: Ionoprobe and aurora data
g0kth
Send Email Send Email
 
I'm running Ionoprobe 1.36 and since 20:30 UTC on the 7 Aug I have not
received any aurora data, everyhing else seems to be working ok.

I have manually downloaded all the updates, current, recent and old
and it makes no difference.

Is anyone else having the same problem? As far as I'm aware none of my
settings have changed.

I did have an outage on the aurora data on the 5 Aug from 14:00 to
00:00 UTC but then it started working again.

Cheers

Dave
GM0KTH

#993 From: James Streible <k4dli@...>
Date: Sat Aug 9, 2008 3:01 pm
Subject: (No subject)
k4dli
Send Email Send Email
 
Dave,

Same here.
No Aurora data since August 7th.

Jim  K4DLI


Dave wrote:
>
> I'm running Ionoprobe 1.36 and since 20:30 UTC on the 7 Aug I have not
> received any aurora data, everyhing else seems to be working ok.
>
> I have manually downloaded all the updates, current, recent and old
> and it makes no difference.
>
> Is anyone else having the same problem? As far as I'm aware none of my
> settings have changed.
>
> I did have an outage on the aurora data on the 5 Aug from 14:00 to
> 00:00 UTC but then it started working again.
>
> Cheers
>
> Dave
> GM0KTH
>
>

#994 From: "Dave" <g0kth@...>
Date: Sat Aug 9, 2008 6:49 pm
Subject: Re: Ionoprobe and aurora data
g0kth
Send Email Send Email
 
Thanks for that Jim, at least it doesn't look like the problem is at
my end.

We'll just have to wait until it comes back on line.

Dave
GM0KTH

--- In dxatlas_group@yahoogroups.com, James Streible <k4dli@...> wrote:
>
> Dave,
>
> Same here.
> No Aurora data since August 7th.
>
> Jim  K4DLI
>
>
> Dave wrote:
> >
> > I'm running Ionoprobe 1.36 and since 20:30 UTC on the 7 Aug I have not
> > received any aurora data, everyhing else seems to be working ok.
> >
> > I have manually downloaded all the updates, current, recent and old
> > and it makes no difference.
> >
> > Is anyone else having the same problem? As far as I'm aware none of my
> > settings have changed.
> >
> > I did have an outage on the aurora data on the 5 Aug from 14:00 to
> > 00:00 UTC but then it started working again.
> >
> > Cheers
> >
> > Dave
> > GM0KTH
> >
> >
>

#995 From: "Dave Baxter" <dave@...>
Date: Mon Aug 11, 2008 8:47 am
Subject: RE: Ionoprobe and aurora data
g8kbv
Send Email Send Email
 
Likewise, Aurora data missing lately.

There was a gap from about 12:00 August the 5th, but it came back that
night.

Late on the 6th it wet off again, coming back on at 00:00.

However late on the 7th it went away again and has not been seen since.

I'm guessing someone else's server broke...

There is nothing in any of the broadcast messages (day view) to indicate
any problems.

73.

Dave G0WBX.


> -----Original Message-----
> __________
> 1a. Ionoprobe and aurora data
>     Posted by: "Dave" g0kth@... g0kth
>     Date: Sat Aug 9, 2008 7:50 am ((PDT))
>
> I'm running Ionoprobe 1.36 and since 20:30 UTC on the 7 Aug I
> have not received any aurora data, everyhing else seems to be
> working ok.
>
> I have manually downloaded all the updates, current, recent
> and old and it makes no difference.
>
> Is anyone else having the same problem? As far as I'm aware
> none of my settings have changed.
>
> I did have an outage on the aurora data on the 5 Aug from
> 14:00 to 00:00 UTC but then it started working again.
>
> Cheers
>
> Dave
> GM0KTH
>
> __________
> 1b. (no subject)
>     Posted by: "James Streible" k4dli@... k4dli
>     Date: Sat Aug 9, 2008 8:01 am ((PDT))
>
> Dave,
>
> Same here.
> No Aurora data since August 7th.
>
> Jim  K4DLI
>
> __________
> 1c. Re: Ionoprobe and aurora data
>     Posted by: "Dave" g0kth@... g0kth
>     Date: Sat Aug 9, 2008 11:49 am ((PDT))
>
> Thanks for that Jim, at least it doesn't look like the
> problem is at my end.
>
> We'll just have to wait until it comes back on line.
>
> Dave
> GM0KTH
>
This mail has been scanned by Palmer Cook Computer Services Limited. 
www.palmercook.co.uk

#1001 From: "russianbrack" <sm6011swl@...>
Date: Thu Aug 14, 2008 9:48 am
Subject: Re: DX ATLAS UPDATES ?
russianbrack
Send Email Send Email
 
I would also like to find those lists up-to-date There were quite some
changes since the end of 2007.

Yury

--- In dxatlas_group@yahoogroups.com, "Tony" <bigyun2000@...> wrote:
>
> Hi all.  I didn't know this group existed, i stumbled upon it by
> accident.  I purchased DX Atlas years and was great software.  Then i
> went QRT for some years and now in 2008 i am back.
>
> Does anyone have a current up-to-date IOTA List? Prefix List and Cities
> List? for use with DX Atlas please.
>
> I did find one that was up to date for 2007 but it is in the wrong
> format.  AS i like to have where i can see the Island info on screen
> such as EU-101 etc etc.
>
> I hope someone can help.
> Thanks kindly
>
> Tony M0MTD
>

#1002 From: "Alex, VE3NEA" <alshovk@...>
Date: Thu Aug 14, 2008 4:03 pm
Subject: Re: [dxatlas] Re: DX ATLAS UPDATES ?
alshovk
Send Email Send Email
 
Hello,

When in doubt, check the DX Atlas download page and see if a new database is
available.

The current database includes an up to date prefix list, the city and island
lists synchronized with the new prefix data, and a new dataset of time zones
and summer/winter time transitions for the world.

The IOTA list is not included with DX Atlas because it is a copyrighted
material, and at the time of publication I did not have a permission to use
it. I have such permission now, so the IOTA list will be included in the
next update, along with the WAP (Antarctic bases) list. Contact me privately
if you want a pre-release version of these new lists.

73 Alex VE3NEA




----- Original Message -----
I would also like to find those lists up-to-date There were quite some
changes since the end of 2007.

Yury

--- In dxatlas_group@yahoogroups.com, "Tony" <bigyun2000@...> wrote:
>
> Hi all.  I didn't know this group existed, i stumbled upon it by
> accident.  I purchased DX Atlas years and was great software.  Then i
> went QRT for some years and now in 2008 i am back.
>
> Does anyone have a current up-to-date IOTA List? Prefix List and Cities
> List? for use with DX Atlas please.
>
> I did find one that was up to date for 2007 but it is in the wrong
> format.  AS i like to have where i can see the Island info on screen
> such as EU-101 etc etc.
>
> I hope someone can help.
> Thanks kindly
>
> Tony M0MTD
>

#1003 From: "Tobias Wellnitz" <T.Wellnitz@...>
Date: Fri Aug 15, 2008 4:07 pm
Subject: Eterlogic Serial Port Splitter with Wintest
T.Wellnitz@...
Send Email Send Email
 
Hi,

everybody is working with Eterlogic Serial Port Splitter for cw-skimmer and
win-test ?

n1mm + cw-skimmer work well.

Win-Test however is continously jumping between VFO1 and VFO2 which is a
little bit annoying.

Anybody knows a workaround ?

73, Toby
EA4/DH1TW

   _____

Von: dxatlas_group@yahoogroups.com [mailto:dxatlas_group@yahoogroups.com] Im
Auftrag von Barry GM3YEH
Gesendet: Dienstag, 8. Juli 2008 20:09
An: dxatlas_group@yahoogroups.com
Betreff: [dxatlas] Re: Eterlogic Serial Port Splitter - Correction



No such QRG pass problems noted here Pete. I have seen the N1MM
exit hang you mention though.
73 de Barry GM3YEH.


--- In dxatlas_group@ <mailto:dxatlas_group%40yahoogroups.com>
yahoogroups.com, Pete Smith <n4zr@...> wrote:
>
> Looks like I spoke too soon in endorsing the Eterlogic virtual
serial port
> emulator. I have done some further tests and for some reason am
now
> getting very flakey frequency data passed to CW Skimmer when
sharing
> between Skimmer and N1MM Logger. Even without tuning either
radio, the
> frequency passed to Skimmer switches every couple of seconds from
the
> correct radio frequency to two totally off-the-wall numbers -
clearly bad
> data being received by Skimmer. I don't know why I didn't see
this before,
> but it will be a show-stopper unless there is some cure. I've
also
> discovered that MM won't close when Skimmer is closed first, while
using
> the VSPE - annoying but not fatal, like the other thing.
>
> oh well.....
>
> 73, Pete N4ZR
>






[Non-text portions of this message have been removed]

#1004 From: "Barry GM3YEH" <bjbe@...>
Date: Sat Aug 16, 2008 12:14 pm
Subject: Re: Eterlogic Serial Port Splitter with Wintest
barrygm3yeh
Send Email Send Email
 
Hi Toby,
I do not use WinTest so I cannot give a direct answer.  If you
suspect that the problem is with the Eterlogic VSPE then I suggest
that you go to their website where you will find a support forum.
Posting questions there always results in a very fast response. If
VSPE is the problem they will try to fix it.  Some bug fixes are
done within a few hours!
73 de Barry GM3YEH.

--- In dxatlas_group@yahoogroups.com, "Tobias Wellnitz"
<T.Wellnitz@...> wrote:
>
> Hi,
>
> everybody is working with Eterlogic Serial Port Splitter for cw-
skimmer and
> win-test ?
>
> n1mm + cw-skimmer work well.
>
> Win-Test however is continously jumping between VFO1 and VFO2
which is a
> little bit annoying.
>
> Anybody knows a workaround ?
>
> 73, Toby
> EA4/DH1TW
>
>   _____
>
> Von: dxatlas_group@yahoogroups.com
[mailto:dxatlas_group@yahoogroups.com] Im
> Auftrag von Barry GM3YEH
> Gesendet: Dienstag, 8. Juli 2008 20:09
> An: dxatlas_group@yahoogroups.com
> Betreff: [dxatlas] Re: Eterlogic Serial Port Splitter - Correction
>
>
>
> No such QRG pass problems noted here Pete. I have seen the N1MM
> exit hang you mention though.
> 73 de Barry GM3YEH.
>
>
> --- In dxatlas_group@ <mailto:dxatlas_group%40yahoogroups.com>
> yahoogroups.com, Pete Smith <n4zr@> wrote:
> >
> > Looks like I spoke too soon in endorsing the Eterlogic virtual
> serial port
> > emulator. I have done some further tests and for some reason am
> now
> > getting very flakey frequency data passed to CW Skimmer when
> sharing
> > between Skimmer and N1MM Logger. Even without tuning either
> radio, the
> > frequency passed to Skimmer switches every couple of seconds
from
> the
> > correct radio frequency to two totally off-the-wall numbers -
> clearly bad
> > data being received by Skimmer. I don't know why I didn't see
> this before,
> > but it will be a show-stopper unless there is some cure. I've
> also
> > discovered that MM won't close when Skimmer is closed first,
while
> using
> > the VSPE - annoying but not fatal, like the other thing.
> >
> > oh well.....
> >
> > 73, Pete N4ZR
> >
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

#1005 From: "Alex Shovkoplyas, VE3NEA" <alshovk@...>
Date: Sat Aug 16, 2008 6:17 pm
Subject: New soft: DX Bulletin Reader 1.0
alshovk
Send Email Send Email
 
I have released DX Bulletin Reader, a tool for viewing, archiving, and
searching the DX news bulletins. This freeware program is available at
http://www.dxatlas.com/bullread/

73 Alex VE3NEA

#1006 From: "dk1vi" <dk1vi@...>
Date: Sun Aug 17, 2008 1:01 pm
Subject: Problem with OmniRig and USB/Serial converter
dk1vi
Send Email Send Email
 
Hello,
I am just trying to control my Kenwood TS-2000X with OmniRig from my
laptop using an USB/Serial converter. Display of TS2K shows "PC" to
indicate it is under PC control but it does not change frequency or
whatever. After some long time waiting there is actually a change in
frequency but then nothing again. Inspecting OmniRig.log I find a lot
of messages "RIG1 Status commands already in queue" .

Controling the TS2K via Ham Radio Deluxe works perfectly with the same
USB/Serial Converter. So to me it seems there is a timing problem
between OmniRig and the USB/Serial Converter.

I have also checked OmniRig with another PC having a 'native' COM port
working OK, so my basic settings in Radio configuration menu must be
correct.

Any ideas how I can "fine tune" settings, maybe "Poll int."?

Regards
Ernst, DK1VI

#1007 From: "Alex, VE3NEA" <alshovk@...>
Date: Sun Aug 17, 2008 4:42 pm
Subject: Re: [dxatlas] Problem with OmniRig and USB/Serial converter
alshovk
Send Email Send Email
 
Hi Ernst,

Switch both RTS and DTR in the port settings to High, and see if this helps.

73 Alex VE3NEA




----- Original Message -----
From: "dk1vi" <dk1vi@...>
To: <dxatlas_group@yahoogroups.com>
Sent: Sunday, August 17, 2008 09:01 AM
Subject: [dxatlas] Problem with OmniRig and USB/Serial converter


Hello,
I am just trying to control my Kenwood TS-2000X with OmniRig from my
laptop using an USB/Serial converter. Display of TS2K shows "PC" to
indicate it is under PC control but it does not change frequency or
whatever. After some long time waiting there is actually a change in
frequency but then nothing again. Inspecting OmniRig.log I find a lot
of messages "RIG1 Status commands already in queue" .

Controling the TS2K via Ham Radio Deluxe works perfectly with the same
USB/Serial Converter. So to me it seems there is a timing problem
between OmniRig and the USB/Serial Converter.

I have also checked OmniRig with another PC having a 'native' COM port
working OK, so my basic settings in Radio configuration menu must be
correct.

Any ideas how I can "fine tune" settings, maybe "Poll int."?

Regards
Ernst, DK1VI

#1008 From: "dk1vi" <dk1vi@...>
Date: Sun Aug 17, 2008 5:22 pm
Subject: Re: [dxatlas] Problem with OmniRig and USB/Serial converter
dk1vi
Send Email Send Email
 
--- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@...> wrote:
>
> Hi Ernst,
>
> Switch both RTS and DTR in the port settings to High, and see if
this helps.
>
> 73 Alex VE3NEA

Hi Alex,
have tried all possible combinations of RTS and DTS w/o success :-((
Works well on other PC with both set to high.

73 Ernst, DK1VI

#1009 From: "dk1vi" <dk1vi@...>
Date: Sun Aug 17, 2008 8:30 pm
Subject: OmniRig Rig-file for IC-R9000 and structure of rig file?
dk1vi
Send Email Send Email
 
Hello,
has anyone in the group generated a rig file for ICOM IC-R9000?

Is there any file available describing the basic structure of the ini
file. I have the special commands for the IC-R9000, but a line like
Value=5|5|vfBcdLU|1|0 is rather cryptic for me. Also the validate
string would need some explanation.

Thanks

Regards from Ernst, DK1VI

#1010 From: "jeraldvolpe" <techmail@...>
Date: Sun Aug 17, 2008 9:47 pm
Subject: Re: New soft: DX Bulletin Reader 1.0
jeraldvolpe
Send Email Send Email
 
Alex, what a cool idea. Downloaded and installed.

I've been downloading and printing out several of these bulletins each
and every week (a thick 3-ring binder)... just think of all the trees
you have saved!

Question: Is there anyway to link BandMaster's country needed list
with the needed list in DX Bulletin Reader? I've looked at the list
files and they are not formatted exactly the same. Would be really
nice if I didn't have to keep these manually synchronized.

Kudos!

73,
Jerry, KG6TT

Messages 976 - 1010 of 2481   Oldest  |  < Older  |  Newer >  |  Newest
Add to My Yahoo!      XML What's This?

Copyright © 2010 Yahoo! Inc. All rights reserved.
Privacy Policy - Terms of Service - Guidelines NEW - Help