By the way, If you are using AALog 2.47 integrated with bandmaster, the DX that you need will be displayed in RED and a new DX Spot will have a green bar on...
... I have Ham Cap 1.5 and Ionoprobe 1.36 and as Mike stated above the Params wiil not increment beyond Dec 2007. The program comes up as Jan 2003. What is...
Puck, Go to the URL for downloads and get the updated SSN file. Unzip it and place it in the Ham CAP folder. It will replace the old one and you will be back...
... it ... you ... put ... Bruce, Thank you very much. That worked. I was wondering why the propagation looked so good. Then I noticed the program was...
Hello around :) as IonoProbe user i'am lookink for a way to activate the IonoProbe button in the Ham CAP settingsdialogue everytime I start Ham CAP. Is there a...
Greetings everyone: I am still trying to get my setup for hamCAP,dxatlas,and ionoprobe to work. As has been posted to this group, I also cannot get my ssn to...
Hi Spencer, All of my shareware programs have a 30-day trial period. All programs are fully functional in the trial mode, so do not expect any improvements...
Alex: OK, I still need help setting this all up. I deleted my hamcap folder and then down loaded the hamcap.zip file. extracted the files again. ran setup. I...
Spencer, in case Alex does not get back to you this evening I will try a whack at this. It sounds like you have another step to go. The 'zip' file will be...
Alex: All of a sudden my brain cramp cleared up and I found the hamcap folder in my programs folder, instead of my documents folder. Anyway, I received your...
Thanks Bruce. As you may have seen, I all of a sudden had my brain fart pass, and I figured it out. You were right. I was looking in the wrong folder for...
Greetings All: I went ahead and purchased the Hamcap deluxe suete, (however you spell that word). Now I need to find out how to set them all up, and get them...
Did you download HAMPORT and OMNIRIG ? It is necessary for Bandmaster to control the rig The setup is in OMNIRIG and HAMPORT. These softwares interface...
Hi Spenser, To control the radio from Band Master, you need a serial cable that connects your radio with a COM port on the computer. If you have an ICOM radio,...
Alex, The timeouts have started again. Would adjusting the polling interval or timeout settings help? My current settings are 500 and 4000, respectively. 73,...
Alex: is the cable I need to interface my computer for Bandmaster a straight thru cable, or modem cable? I always get them confused. I think I have a modem...
Alex: Sorry, I forgot about this question. I started to run the Pre- computing Maps program. How long will it usually take to complete? The blue line in the...
This is a test to see if I am still a member of this group. I posted two questions last week, and have received no response yet. I know that some might...
Hi Spenser, I guess you missed my recent reply to you that explained how to request help with my software. Here is a copy. If you have questions that you think...
I am sorry that I jumped to the conclusion that I was being ignored by the group. I received very prompt replys to my first few posts, that I assumed that all...
Spencer, it has to be your setup since many others are using Omni-Rig with no problems. What radio are you using, and what settings? If ARCS II is another...
Hi Barry, Your polling and timeout settings are OK, the problem lies somewhere else. 73 Alex VE3NEA ... Alex, The timeouts have started again. Would adjusting...
I bought the registration for the group (dx atlas, ionoprobe and ham cap. All of them load fine except dx atlas that keeps asking for the registration number....
I am reading the help file here: http://www.benlo.com/dxmon/hamcap.html <http://www.benlo.com/dxmon/hamcap.html> I am unable to get to this chart. From...
Hi Mark, It is not clear what you consider a problem here. When you click on Propagation in the Band Master popup menu, it is supposed to start HamCap, if it...
DOH! I just realized that the ref I sent is for DXMON, the spotting software. Not sure how that got into the help file for HamCap page? Anyway, I do have...
Hi Mark, DXMON is a shareware product developed by Peter, VE3SUN. Peter has his own Yahoo group called DXMON. 73 Alex VE3NEA ... From: "wd4elg_base"...
