Hi
            How do you get it to work wit dx atlas please
                                        Jim m0jgm

-------Original Message-------

From: AA0OI
Date: 25/05/2007 18:10:55
To: dxatlas_group@yahoogroups.com
Subject: [dxatlas] Add On Program

Hi Group:

Dick Come (W3WVG)has written a (very small program called EZLog to work with
DxAtlas. If you are connected to the internet and put in a call sign,
program with look up info from QRZ and place a flag, and connecting line
between the stations ( and puts the callsign on the stations) in the DxAtlas
Map.. These are not Permanent and when the EZlog Program is closed they go
away.(flags stay but calls and connecting lines go) This small program is
great for calling Nets or when any groups gets together.. (We use it for
SSTV and Digital SSTV to keep track of who up next)EZLog can be changed to
nicknames, and when station has had there turn, click on call and it will
change color to show they have had there turn (clear to green and back when
it comes around again.) It will also place an antenna on the home ( or
control stations site).. Program sits in small box on the screen and shows
call, name (or nick name) and location. Click on Map and it brings up
DxAtlas.. This is a must
try for groups and DxAtlas can be downloaded for a 30 day free trial from
DxAtlas Site. The EZLog I will have to send to you direct, so email me if
you would like it.. If enough interest is shown I will post ( with Alex's
permition) to programs in the blog.

Garrett / AA0OI

__________________________________________________________Got a little couch
potato?
Check out fun summer activities for kids.
http://search.yahoo
com/search?fr=oni_on_mail&p=summer+activities+for+kids&cs=bz

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

Hi Jim:

attached find program  EZLog,, set up is simple,, make sure to do the set up,
decimal lat and log.. it will put in the grid square. its a zip file.. let me
know how it works or if you have any problems..  ( this is a special EZLong and
not the same as he has on his website..

Garrett / AA0OI



----- Original Message ----
From: Jim Marlett <m0jgm@...>
To: dxatlas_group@yahoogroups.com
Sent: Friday, May 25, 2007 1:46:31 PM
Subject: Re: [dxatlas] Add On Program

Hi
How do you get it to work wit dx atlas please
Jim m0jgm

-------Original Message----- --

From: AA0OI
Date: 25/05/2007 18:10:55
To: dxatlas_group@ yahoogroups. com
Subject: [dxatlas] Add On Program

Hi Group:

Dick Come (W3WVG)has written a (very small program called EZLog to work with
DxAtlas. If you are connected to the internet and put in a call sign,
program with look up info from QRZ and place a flag, and connecting line
between the stations ( and puts the callsign on the stations) in the DxAtlas
Map.. These are not Permanent and when the EZlog Program is closed they go
away.(flags stay but calls and connecting lines go) This small program is
great for calling Nets or when any groups gets together.. (We use it for
SSTV and Digital SSTV to keep track of who up next)EZLog can be changed to
nicknames, and when station has had there turn, click on call and it will
change color to show they have had there turn (clear to green and back when
it comes around again.) It will also place an antenna on the home ( or
control stations site).. Program sits in small box on the screen and shows
call, name (or nick name) and location. Click on Map and it brings up
DxAtlas.. This is a must
try for groups and DxAtlas can be downloaded for a 30 day free trial from
DxAtlas Site. The EZLog I will have to send to you direct, so email me if
you would like it.. If enough interest is shown I will post ( with Alex's
permition) to programs in the blog.

Garrett / AA0OI

____________ _________ _________ _________ _________ _________ _Got a little
couch
potato?
Check out fun summer activities for kids.
http://search. yahoo
com/search?fr= oni_on_mail& p=summer+ activities+ for+kids& cs=bz

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]






________________________________________________________________________________\
____
The fish are biting.
Get more visitors on your site using Yahoo! Search Marketing.
http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php

[Non-text portions of this message have been removed]

HI Garrett
                Thank you very much , it works ok .
                                                      Thank you
                                                    Jim M0JGM

  http://www.eQSL.cc/Member.cfm?M0JGM
-------Original Message-------

From: AA0OI
Date: 25/05/2007 21:14:21
To: dxatlas_group@yahoogroups.com
Subject: Re: [dxatlas] Add On Program

Hi Jim:

attached find program EZLog,, set up is simple,, make sure to do the set up,
decimal lat and log.. it will put in the grid square. its a zip file.. let
me know how it works or if you have any problems.. ( this is a special
EZLong and not the same as he has on his website..

Garrett / AA0OI

----- Original Message ----
From: Jim Marlett <m0jgm@...>
To: dxatlas_group@yahoogroups.com
Sent: Friday, May 25, 2007 1:46:31 PM
Subject: Re: [dxatlas] Add On Program

Hi
How do you get it to work wit dx atlas please
Jim m0jgm

-------Original Message----- --

From: AA0OI
Date: 25/05/2007 18:10:55
To: dxatlas_group@ yahoogroups. com
Subject: [dxatlas] Add On Program

Hi Group:

Dick Come (W3WVG)has written a (very small program called EZLog to work with
DxAtlas. If you are connected to the internet and put in a call sign,
program with look up info from QRZ and place a flag, and connecting line
between the stations ( and puts the callsign on the stations) in the DxAtlas
Map.. These are not Permanent and when the EZlog Program is closed they go
away.(flags stay but calls and connecting lines go) This small program is
great for calling Nets or when any groups gets together.. (We use it for
SSTV and Digital SSTV to keep track of who up next)EZLog can be changed to
nicknames, and when station has had there turn, click on call and it will
change color to show they have had there turn (clear to green and back when
it comes around again.) It will also place an antenna on the home ( or
control stations site).. Program sits in small box on the screen and shows
call, name (or nick name) and location. Click on Map and it brings up
DxAtlas.. This is a must
try for groups and DxAtlas can be downloaded for a 30 day free trial from
DxAtlas Site. The EZLog I will have to send to you direct, so email me if
you would like it.. If enough interest is shown I will post ( with Alex's
permition) to programs in the blog.

Garrett / AA0OI

____________ _________ _________ _________ _________ _________ _Got a little
couch
potato?
Check out fun summer activities for kids.
http://search. yahoo
com/search?fr= oni_on_mail& p=summer+ activities+ for+kids& cs=bz

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

__________________________________________________________
The fish are biting.
Get more visitors on your site using Yahoo! Search Marketing.
http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

Ok Jim:  glad you like it..


Garrett / AA0OI



----- Original Message ----
From: Jim Marlett <m0jgm@...>
To: dxatlas_group@yahoogroups.com
Sent: Saturday, May 26, 2007 4:35:18 AM
Subject: Re: [dxatlas] Add On Program

HI Garrett
Thank you very much , it works ok .
Thank you
Jim M0JGM

http://www.eQSL. cc/Member. cfm?M0JGM
-------Original Message----- --

From: AA0OI
Date: 25/05/2007 21:14:21
To: dxatlas_group@ yahoogroups. com
Subject: Re: [dxatlas] Add On Program

Hi Jim:

attached find program EZLog,, set up is simple,, make sure to do the set up,
decimal lat and log.. it will put in the grid square. its a zip file.. let
me know how it works or if you have any problems.. ( this is a special
EZLong and not the same as he has on his website..

Garrett / AA0OI

----- Original Message ----
From: Jim Marlett <m0jgm@blueyonder. co.uk>
To: dxatlas_group@ yahoogroups. com
Sent: Friday, May 25, 2007 1:46:31 PM
Subject: Re: [dxatlas] Add On Program

Hi
How do you get it to work wit dx atlas please
Jim m0jgm

-------Original Message----- --

From: AA0OI
Date: 25/05/2007 18:10:55
To: dxatlas_group@ yahoogroups. com
Subject: [dxatlas] Add On Program

Hi Group:

Dick Come (W3WVG)has written a (very small program called EZLog to work with
DxAtlas. If you are connected to the internet and put in a call sign,
program with look up info from QRZ and place a flag, and connecting line
between the stations ( and puts the callsign on the stations) in the DxAtlas
Map.. These are not Permanent and when the EZlog Program is closed they go
away.(flags stay but calls and connecting lines go) This small program is
great for calling Nets or when any groups gets together.. (We use it for
SSTV and Digital SSTV to keep track of who up next)EZLog can be changed to
nicknames, and when station has had there turn, click on call and it will
change color to show they have had there turn (clear to green and back when
it comes around again.) It will also place an antenna on the home ( or
control stations site).. Program sits in small box on the screen and shows
call, name (or nick name) and location. Click on Map and it brings up
DxAtlas.. This is a must
try for groups and DxAtlas can be downloaded for a 30 day free trial from
DxAtlas Site. The EZLog I will have to send to you direct, so email me if
you would like it.. If enough interest is shown I will post ( with Alex's
permition) to programs in the blog.

Garrett / AA0OI

____________ _________ _________ _________ _________ _________ _Got a little
couch
potato?
Check out fun summer activities for kids.
http://search. yahoo
com/search?fr= oni_on_mail& p=summer+ activities+ for+kids& cs=bz

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

____________ _________ _________ _________ _________ _________ _
The fish are biting.
Get more visitors on your site using Yahoo! Search Marketing.
http://searchmarket ing.yahoo. com/arp/sponsore dsearch_v2. php

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]






________________________________________________________________________________\
____
The fish are biting.
Get more visitors on your site using Yahoo! Search Marketing.
http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php

[Non-text portions of this message have been removed]

Dear Friend,

Grab this once in a life time opportunity to earn a handsome income from
internet … and that too… Absolutely Free..!!!!
   Join our team and follow our simple instructions..!!!

http://www.business-sale.biz/

Rgds,

Neha.



---------------------------------
We won't tell. Get more on shows you hate to love
(and love to hate): Yahoo! TV's Guilty Pleasures list.

---------------------------------
We won't tell. Get more on shows you hate to love
(and love to hate): Yahoo! TV's Guilty Pleasures list.

[Non-text portions of this message have been removed]

Alex,

You may recall I was in touch with you some time back about Faros
dying with no errors on a Windows XP SP2 machine.

Unfortunately, despite trying it now on 3 separate machines all
running Windows XP SP2, but different soundcards, the problem is
on-going.

I originally came across the problem with an evaluation version of
Faros. I've registered it in the meantime, but unfortunately the
problem remains.

Please contact me off list (ei4hq.mail@...), and I'll send you
error logs etc.

Best Regards
Cormac, EI4HQ

Anyone know if MR runs OK on Vista?

tnx es 73,

Ian, K5ZM

Hi Ian,

The users say MR runs fine on Vista, but I have not tried it myself.

Alex



   ----- Original Message -----
   From: k5zm_7
   To: dxatlas_group@yahoogroups.com
   Sent: Monday, July 30, 2007 01:48 AM
   Subject: [dxatlas] MR on Vista?


   Anyone know if MR runs OK on Vista?

   tnx es 73,

   Ian, K5ZM





[Non-text portions of this message have been removed]

After having started DXAtlas from Hamcap I cannot start DXAtlas
alone, as every time a get a pop-up messsage which says
"Initialization Error"

DXAtlas will still start from HamCap though.

I am running these under Vista.

Help please.

Andy - VE3NVK

For what it is worth: I don't have that problem, as I can easily start
DX Atlas either way.

73 de OZ4PH, Peter

--- In dxatlas_group@yahoogroups.com, "Andrew Hart" <andyl@...> wrote:
>
> After having started DXAtlas from Hamcap I cannot start DXAtlas
> alone, as every time a get a pop-up messsage which says
> "Initialization Error"
>
> DXAtlas will still start from HamCap though.
>
> I am running these under Vista.
>
> Help please.
>
> Andy - VE3NVK
>

I just fired up Faros after a long absence and found out I have to
register it.  However I can find no reference to it on the regsoft
website as per the instructions.  Please advise.

Hi Buddy:
Go to DxAtlas page and find Faros on left hand side and click,, at the bottom of
the page that it brings up is register,, click and it will take you to the
correct resoft page...  regsoft is VERY slow and it may take 4 to 7 day for them
to get the code back to you.. if you don't hear from them in that lenght of time
leave message here for Alex, or contact me and I will sent a message to his
personal email box..
  ( by the way,I just tryed this and it does take you to the resoft site for
Faros reg..))

Garrett / AA0OI



----- Original Message ----
From: buddybell1143 <hhbell@...>
To: dxatlas_group@yahoogroups.com
Sent: Saturday, September 22, 2007 3:23:20 PM
Subject: [dxatlas] faros registration

I just fired up Faros after a long absence and found out I have to
register it. However I can find no reference to it on the regsoft
website as per the instructions. Please advise.





      
________________________________________________________________________________\
____
Shape Yahoo! in your own image.  Join our Network Research Panel today!  
http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7



[Non-text portions of this message have been removed]

You must have been very unlucky.  My registeration(s) for other of Alex´s
products have taken a matter of moments only.

   73 de Geoff
   G3NPA

AA0OI <aa0oi@...> wrote:
           Hi Buddy:
Go to DxAtlas page and find Faros on left hand side and click,, at the bottom of
the page that it brings up is register,, click and it will take you to the
correct resoft page... regsoft is VERY slow and it may take 4 to 7 day for them
to get the code back to you.. if you don't hear from them in that lenght of time
leave message here for Alex, or contact me and I will sent a message to his
personal email box..
( by the way,I just tryed this and it does take you to the resoft site for Faros
reg..))

Garrett / AA0OI

----- Original Message ----
From: buddybell1143 <hhbell@...>
To: dxatlas_group@yahoogroups.com
Sent: Saturday, September 22, 2007 3:23:20 PM
Subject: [dxatlas] faros registration

I just fired up Faros after a long absence and found out I have to
register it. However I can find no reference to it on the regsoft
website as per the instructions. Please advise.

__________________________________________________________
Shape Yahoo! in your own image. Join our Network Research Panel today!
http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]

Hi Geoff:
These are what I have heard from other persons that have used regsoft, not
personal experience..
I have been beta testing for Alex for awhile so have not had to register.
Garrett / AA0OI



----- Original Message ----
From: Geoff Anderson <Geoff.Anderson@...>
To: dxatlas_group@yahoogroups.com
Sent: Sunday, September 23, 2007 5:14:31 AM
Subject: Re: [dxatlas] faros registration

You must have been very unlucky. My registeration( s) for other of Alex´s
products have taken a matter of moments only.

73 de Geoff
G3NPA

AA0OI <aa0oi@yahoo. com> wrote:
Hi Buddy:
Go to DxAtlas page and find Faros on left hand side and click,, at the bottom of
the page that it brings up is register,, click and it will take you to the
correct resoft page... regsoft is VERY slow and it may take 4 to 7 day for them
to get the code back to you.. if you don't hear from them in that lenght of time
leave message here for Alex, or contact me and I will sent a message to his
personal email box..
( by the way,I just tryed this and it does take you to the resoft site for Faros
reg..))

Garrett / AA0OI

----- Original Message ----
From: buddybell1143 <hhbell@robomidi. org>
To: dxatlas_group@ yahoogroups. com
Sent: Saturday, September 22, 2007 3:23:20 PM
Subject: [dxatlas] faros registration

I just fired up Faros after a long absence and found out I have to
register it. However I can find no reference to it on the regsoft
website as per the instructions. Please advise.

____________ _________ _________ _________ _________ _________ _
Shape Yahoo! in your own image. Join our Network Research Panel today!
http://surveylink. yahoo.com/ gmrs/yahoo_ panel_invite. asp?a=7

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





      
________________________________________________________________________________\
____
Luggage? GPS? Comic books?
Check out fitting gifts for grads at Yahoo! Search
http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz

[Non-text portions of this message have been removed]

Any chance of adding mouse wheel support to an upcoming version of
OmniRig?

Hello,

Mouse wheel support must be implemented in the application that uses OmniRig
rather than in OmniRig itself.

73 Alex VE3NEA




Any chance of adding mouse wheel support to an upcoming version of
OmniRig?

Thanks Alex.

73,

Ed W4HTD

Alex, VE3NEA wrote:
> Hello,
>
> Mouse wheel support must be implemented in the application that uses OmniRig
> rather than in OmniRig itself.
>
> 73 Alex VE3NEA
>
>
>
>
> Any chance of adding mouse wheel support to an upcoming version of
> OmniRig?
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Hello all:

I have been running DXAtlas/Hamcap for a number of years, with an OS
Windows XP. Never had a problem.

Now I have a new machine running Vista.

I reloaded DXAtlas but when I shut it down I get the message
"Unable to write to C:ProgramFiles\Afreet\DXAtlas\DXAtlas.ini"

I also get this message when closing down Hamcap, but the message
refers to "Hamcap.ini"

When I try to open DXAtlas with Hamcap, I get either initialization
error, or it tells me I need a higher version of DXAtlas, but I have
the latest.  Also, I have registered this copy.

Anybody know what is going on?

Looked on the website but could not find any info.

Tnx

Larry W8LO

Larry,

The mistake you have made is to run Vista!  ;-)  Microshaft have totally
re-invented the wheel and then put double padlocks on it.

Try removing ALL the protective gizmos like UAC  - OR - re-install dxatlas
in a directory other than program files...or on another drive.


73 de Geoff
G3NPA
Geoff.Anderson@...



----- Original Message -----
From: "Larry Otto" <w8lo@...>
To: <dxatlas_group@yahoogroups.com>
Sent: Tuesday, October 30, 2007 11:47 PM
Subject: [dxatlas] DXAtlas/Hamcap - Vista


Hello all:

I have been running DXAtlas/Hamcap for a number of years, with an OS
Windows XP. Never had a problem.

Now I have a new machine running Vista.

I reloaded DXAtlas but when I shut it down I get the message
"Unable to write to C:ProgramFiles\Afreet\DXAtlas\DXAtlas.ini"

I also get this message when closing down Hamcap, but the message
refers to "Hamcap.ini"

When I try to open DXAtlas with Hamcap, I get either initialization
error, or it tells me I need a higher version of DXAtlas, but I have
the latest.  Also, I have registered this copy.

Anybody know what is going on?

Looked on the website but could not find any info.

Tnx

Larry W8LO

Hi Larry,


For some reason, Vista does not allow the program to write to the
DxAtlas.ini file - perhaps you do not have sufficient privileges for that,
or the file has a read-only attribute - e.g., it was copied from a CD. The
solution is to ensure that DxAtlas is allowed to write to its own ini file.

73 Alex VE3NEA





----- Original Message -----
From: Larry Otto
To: dxatlas_group@yahoogroups.com
Sent: Tuesday, October 30, 2007 07:47 PM
Subject: [dxatlas] DXAtlas/Hamcap - Vista


Hello all:

I have been running DXAtlas/Hamcap for a number of years, with an OS
Windows XP. Never had a problem.

Now I have a new machine running Vista.

I reloaded DXAtlas but when I shut it down I get the message
"Unable to write to C:ProgramFiles\Afreet\DXAtlas\DXAtlas.ini"

I also get this message when closing down Hamcap, but the message
refers to "Hamcap.ini"

When I try to open DXAtlas with Hamcap, I get either initialization
error, or it tells me I need a higher version of DXAtlas, but I have
the latest. Also, I have registered this copy.

Anybody know what is going on?

Looked on the website but could not find any info.

Tnx

Larry W8LO

Alex,



Windows Vista does not allow a program to write to Program Files directory.
If you look at the directory you will see Program Files and Program Data.
The data directory is what is used now.  It is part of Vista Security.  If
you force a program to write to a Program File directory, it will look like
it does, but actually behind the scene, it writes to User directory, the
logged on user, \AppData\Local\VirtualStore\Program Files\program name.
Have people tried running your program using the compatibility mode
selecting XP?  I am running IonoProbe and I have a folder
Afreet\InonProbe\Data and also Text in the VirtualStore folders.
MorseRunner is also there.  These programs run fine for me.  I hope this may
help to shed some light on the problems people are having.  My IonoProbe.ini
file is in the IonoProbe VirtualStore area.  Google VirtualStore and you
will learn more.



Good Luck and 73,

John



   _____

From: dxatlas_group@yahoogroups.com [mailto:dxatlas_group@yahoogroups.com]
On Behalf Of Alex, VE3NEA
Sent: Tuesday, October 30, 2007 8:18 PM
To: dxatlas_group@yahoogroups.com
Subject: Re: [dxatlas] DXAtlas/Hamcap - Vista



Hi Larry,

For some reason, Vista does not allow the program to write to the
DxAtlas.ini file - perhaps you do not have sufficient privileges for that,
or the file has a read-only attribute - e.g., it was copied from a CD. The
solution is to ensure that DxAtlas is allowed to write to its own ini file.

73 Alex VE3NEA

----- Original Message -----
From: Larry Otto
To: dxatlas_group@ <mailto:dxatlas_group%40yahoogroups.com> yahoogroups.com
Sent: Tuesday, October 30, 2007 07:47 PM
Subject: [dxatlas] DXAtlas/Hamcap - Vista

Hello all:

I have been running DXAtlas/Hamcap for a number of years, with an OS
Windows XP. Never had a problem.

Now I have a new machine running Vista.

I reloaded DXAtlas but when I shut it down I get the message
"Unable to write to C:ProgramFiles\Afreet\DXAtlas\DXAtlas.ini"

I also get this message when closing down Hamcap, but the message
refers to "Hamcap.ini"

When I try to open DXAtlas with Hamcap, I get either initialization
error, or it tells me I need a higher version of DXAtlas, but I have
the latest. Also, I have registered this copy.

Anybody know what is going on?

Looked on the website but could not find any info.

Tnx

Larry W8LO





[Non-text portions of this message have been removed]

Anybody been successful with the FT2000 and Faros (Beacon) talking to
each other, don't seem to be to successful here, got it working with
other programs ok.

Rgds Raymond GM0VRP

What an awesome set of tools!  I love it!

Some newbie questions:

     * What do the different propagation types indicate?  f2f2, 3f1, etc.
     * How can I import an ADIF log file, or integrate with a logging
program, so Band Master shows the spots I really need?
     * Should I use the same antennas (mine) for TX and RX under HAMCAP?
Or should I assume that RX is the other ham with a better antenna?

Mark WD4ELG



[Non-text portions of this message have been removed]

Mark,

You have some good questions here but all ( as far as I can see) are all to
do with programs other than Logger32

>     * What do the different propagation types indicate?  f2f2, 3f1, etc.

I think you are referring here to HamCap.  I'm not 100% sure but I believe
it indicates how the signal "bounces" to the destination and off which
layers.

>     * How can I import an ADIF log file, or integrate with a logging
> program, so Band Master shows the spots I really need?

What is Band Master?  Personally I have never heard of it. Why use it at all
as Logger32 has a reasonably sophisticated spot filtering system - even with
highlighted coloured backgrounds that tell you what you are missing from
your log.  What more do you need?  Have you tried clicking on the main icon
15 from the left (two to the right of the Morse key)


>     * Should I use the same antennas (mine) for TX and RX under HAMCAP?
> Or should I assume that RX is the other ham with a better antenna?

Once again a non Logger32 question.  The antenna set up is for YOU ( both tx
and rx) . How can HamCap possibly know what the other person is using?


73 de Geoff
G3NPA
Geoff.Anderson@...



----- Original Message -----
From: "wd4elg_base" <mlunday@...>
To: <dxatlas_group@yahoogroups.com>
Sent: Tuesday, November 27, 2007 8:13 AM
Subject: [dxatlas] Some new user questions


>
> What an awesome set of tools!  I love it!
>
> Some newbie questions:
>
>     * What do the different propagation types indicate?  f2f2, 3f1, etc.
>     * How can I import an ADIF log file, or integrate with a logging
> program, so Band Master shows the spots I really need?
>     * Should I use the same antennas (mine) for TX and RX under HAMCAP?
> Or should I assume that RX is the other ham with a better antenna?
>
> Mark WD4ELG
>
>
>
> [Non-text portions of this message have been removed]
>
>

Sorry one and all - I had the original message to this come into my Logger32
email box and answered it as though it was a Logger32 set of questions.

My mistake...

73 de Geoff
G3NPA
Geoff.Anderson@...



----- Original Message -----
From: "Geoff Anderson" <Geoff.Anderson@...>
To: <dxatlas_group@yahoogroups.com>
Sent: Tuesday, November 27, 2007 9:46 AM
Subject: Re: [dxatlas] Some new user questions


> Mark,
>
> You have some good questions here but all ( as far as I can see) are all
to
> do with programs other than Logger32
>
> >     * What do the different propagation types indicate?  f2f2, 3f1, etc.
>
> I think you are referring here to HamCap.  I'm not 100% sure but I believe
> it indicates how the signal "bounces" to the destination and off which
> layers.
>
> >     * How can I import an ADIF log file, or integrate with a logging
> > program, so Band Master shows the spots I really need?
>
> What is Band Master?  Personally I have never heard of it. Why use it at
all
> as Logger32 has a reasonably sophisticated spot filtering system - even
with
> highlighted coloured backgrounds that tell you what you are missing from
> your log.  What more do you need?  Have you tried clicking on the main
icon
> 15 from the left (two to the right of the Morse key)
>
>
> >     * Should I use the same antennas (mine) for TX and RX under HAMCAP?
> > Or should I assume that RX is the other ham with a better antenna?
>
> Once again a non Logger32 question.  The antenna set up is for YOU ( both
tx
> and rx) . How can HamCap possibly know what the other person is using?
>
>
> 73 de Geoff
> G3NPA
> Geoff.Anderson@...
>
>
>
> ----- Original Message -----
> From: "wd4elg_base" <mlunday@...>
> To: <dxatlas_group@yahoogroups.com>
> Sent: Tuesday, November 27, 2007 8:13 AM
> Subject: [dxatlas] Some new user questions
>
>
> >
> > What an awesome set of tools!  I love it!
> >
> > Some newbie questions:
> >
> >     * What do the different propagation types indicate?  f2f2, 3f1, etc.
> >     * How can I import an ADIF log file, or integrate with a logging
> > program, so Band Master shows the spots I really need?
> >     * Should I use the same antennas (mine) for TX and RX under HAMCAP?
> > Or should I assume that RX is the other ham with a better antenna?
> >
> > Mark WD4ELG
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
>

Hi Mark,

HamCap is a front end to the VOACAP propagation prediction engine, all data
that it displays actually come from that engine. The path type codes in
VOACAP are a bit cryptic but fully documented. In particular, F2F2 means a
multi-hop path with reflections from the F2 layer.

The only logger known to integrate correctly with Band Master is AALog by
RZ4AG. When the two programs work together, the status of the spots in BM is
color-coded using information from the logger (new country, dupe, etc.). A
click on the spot not only tunes the radio at the spot frequency but also
populates the Callsign field in the logger, when you tune away from the
spot, the Callsign field is cleared, etc. The best thing about this combo is
that both programs have access to the CAT interface of the radio at the same
time.

Of course, in HamCap you have to specify the TX antenna at one end of the
path and the RX antenna at the other end - unless you are trying to work
yourself ;-)

73 Alex VE3NEA





--------------------------
What an awesome set of tools! I love it!

Some newbie questions:

* What do the different propagation types indicate? f2f2, 3f1, etc.
* How can I import an ADIF log file, or integrate with a logging
program, so Band Master shows the spots I really need?
* Should I use the same antennas (mine) for TX and RX under HAMCAP?
Or should I assume that RX is the other ham with a better antenna?

IonoProbe 1.35 has been release. It takes care of the new format of
auroral activity data at the NOAA web site.

73 Alex VE3NEA

in zhe new ionoprobe there must a mistake. the coordinates 51n 9o are shown in
england but it's in the middle of germany, so i get false results
73 jürgen dg8fdd

   ----- Original Message -----
   From: Alex Shovkoplyas, VE3NEA
   To: dxatlas_group@yahoogroups.com
   Sent: Saturday, December 08, 2007 6:05 PM
   Subject: [dxatlas] IonoProbe 1.35


   IonoProbe 1.35 has been release. It takes care of the new format of
   auroral activity data at the NOAA web site.

   73 Alex VE3NEA





[Non-text portions of this message have been removed]

Hi Jurgen,

Please describe your problem in more detail. It is not clear from your
message where in IonoProbe you are entering your coordinates, and where
England is shown.

73 Alex VE3NEA



----- Original Message -----
in zhe new ionoprobe there must a mistake. the coordinates 51n 9o are shown
in england but it's in the middle of germany, so i get false results
73 jürgen dg8fdd

sorry  alex not ionoprobe  in hamcap i have the problem . see it after updating
and testing if ionoprobe hamcap and dxatlas are working together.
   ----- Original Message -----
   From: Alex, VE3NEA
   To: dxatlas_group@yahoogroups.com
   Sent: Saturday, December 08, 2007 9:16 PM
   Subject: Re: [dxatlas] IonoProbe 1.35


   Hi Jurgen,

   Please describe your problem in more detail. It is not clear from your
   message where in IonoProbe you are entering your coordinates, and where
   England is shown.

   73 Alex VE3NEA

   ----- Original Message -----
   in zhe new ionoprobe there must a mistake. the coordinates 51n 9o are shown
   in england but it's in the middle of germany, so i get false results
   73 jürgen dg8fdd





[Non-text portions of this message have been removed]