I get this constantly whenever I launch BandMaster or any other application

that uses OmniRig.















My only work-around is to launch OmniRig directly FIRST. leave the

application running (Rig1, Rig2, About). launch BandMaster (or LogWindow).

and the application works fine. I hit "OK" in the OmniRig dialog box and it

all works fine. until I shut down the application using OmniRig. than I

repeat the whole process.







Mike, WA9PIE







[Non-text portions of this message have been removed]

Hi Mike.



You'll have to quote with text what the error message is, as the

Y-Groupmail logic stripped any attachment you may have sent.



Is it the exact same message each and every time?



Has it ever worked OK without error?  If so, what has changed elsewhere

on the PC, new app's, app's removed, changed hardware etc etc, any

change however trivial.



Also, what exact version of Windows are you using?  As well as the exact

versions of the associated programs your using, and what rigs, just in

case...



It all helps us to try to figure what's happening, or not..



Cheers.



Dave G0WBX.





--- Original Message ---

Posted by: "Michael G. Carper"

Tue Oct 20, 2009 1:44 pm (PDT)



I get this constantly whenever I launch BandMaster or any other

application

that uses OmniRig.



My only work-around is to launch OmniRig directly FIRST. leave the

application running (Rig1, Rig2, About). launch BandMaster (or

LogWindow).

and the application works fine. I hit "OK" in the OmniRig dialog box and

it

all works fine. until I shut down the application using OmniRig. than I

repeat the whole process.



Mike, WA9PIE



[Non-text portions of this message have been removed]

Yes, it's the same message every time.







Here's a link to it:







http://www.wa9pie.net/OmniRig-Crash.jpg







It installs with LogWindow and BandMaster. or can be installed separately.







.a long time ago. it worked when installing LogWindow.  But after installing

BandMaster, it produced this error.  I've deinstalled all of it and started

from scratch and I get the same thing.







Mike







From: dxatlas_group@yahoogroups.com [mailto:dxatlas_group@yahoogroups.com]

On Behalf Of Dave Baxter

Sent: Wednesday, October 21, 2009 12:15 PM

To: dxatlas_group@yahoogroups.com

Subject: RE: [dxatlas] Has anyone else seen this error?











Hi Mike.



You'll have to quote with text what the error message is, as the

Y-Groupmail logic stripped any attachment you may have sent.



Is it the exact same message each and every time?



Has it ever worked OK without error? If so, what has changed elsewhere

on the PC, new app's, app's removed, changed hardware etc etc, any

change however trivial.



Also, what exact version of Windows are you using? As well as the exact

versions of the associated programs your using, and what rigs, just in

case...



It all helps us to try to figure what's happening, or not..



Cheers.



Dave G0WBX.



--- Original Message ---

Posted by: "Michael G. Carper"

Tue Oct 20, 2009 1:44 pm (PDT)



I get this constantly whenever I launch BandMaster or any other

application

that uses OmniRig.



My only work-around is to launch OmniRig directly FIRST. leave the

application running (Rig1, Rig2, About). launch BandMaster (or

LogWindow).

and the application works fine. I hit "OK" in the OmniRig dialog box and

it

all works fine. until I shut down the application using OmniRig. than I

repeat the whole process.



Mike, WA9PIE



[Non-text portions of this message have been removed]











[Non-text portions of this message have been removed]

I also have a dump file, if any can read it.







Mike, WA9PIE







From: Michael G. Carper [mailto:mike@...]

Sent: Wednesday, October 21, 2009 1:41 PM

To: dxatlas_group@yahoogroups.com

Subject: RE: [dxatlas] Has anyone else seen this error?







Yes, it's the same message every time.







Here's a link to it:







http://www.wa9pie.net/OmniRig-Crash.jpg







It installs with LogWindow and BandMaster. or can be installed separately.







.a long time ago. it worked when installing LogWindow.  But after installing

BandMaster, it produced this error.  I've deinstalled all of it and started

from scratch and I get the same thing.







Mike







From: dxatlas_group@yahoogroups.com [mailto:dxatlas_group@yahoogroups.com]

On Behalf Of Dave Baxter

Sent: Wednesday, October 21, 2009 12:15 PM

To: dxatlas_group@yahoogroups.com

Subject: RE: [dxatlas] Has anyone else seen this error?











Hi Mike.



You'll have to quote with text what the error message is, as the

Y-Groupmail logic stripped any attachment you may have sent.



Is it the exact same message each and every time?



Has it ever worked OK without error? If so, what has changed elsewhere

on the PC, new app's, app's removed, changed hardware etc etc, any

change however trivial.



Also, what exact version of Windows are you using? As well as the exact

versions of the associated programs your using, and what rigs, just in

case...



It all helps us to try to figure what's happening, or not..



Cheers.



Dave G0WBX.



--- Original Message ---

Posted by: "Michael G. Carper"

Tue Oct 20, 2009 1:44 pm (PDT)



I get this constantly whenever I launch BandMaster or any other

application

that uses OmniRig.



My only work-around is to launch OmniRig directly FIRST. leave the

application running (Rig1, Rig2, About). launch BandMaster (or

LogWindow).

and the application works fine. I hit "OK" in the OmniRig dialog box and

it

all works fine. until I shut down the application using OmniRig. than I

repeat the whole process.



Mike, WA9PIE



[Non-text portions of this message have been removed]











[Non-text portions of this message have been removed]

It’s been a while since I’ve brought this up, but I could use some help.







Since writing the original note, I have completely wiped my hard drive and

installed Windows7.  Upon reinstalling my programs, I was able to re-create

the problem – which now won’t go away.  The steps were:



·         Install LogWindow 4.5.1.4; this installs a version of OmniRig



o   Upon taking this step, I tested this and both LogWindow and OmniRig

worked fine.



·         Install Band Master; this also wants to install a version of

OmniRig



o   During this step, the install asks me to shut down other versions of

OmniRig that are running; so I did (shut down LogWindow and OmniRig)



o   After completing this step, OmniRig generates the error in the link

below.



§  Band Master will not run.



§  LogWindow will generate this error when attempting to launch OmniRig



§  My work-around is (as it has been) to launch OmniRig first, then launch

LogWindow.  This is strange, given that you’d otherwise not be required to

launch OmniRig first in order to avoid an error in Band Master, LogWindow,

or another program that calls OmniRig.







Thoughts?







In general, I’d be quite pleased if I could just go back to the way it was

before I attempted to install Band Master.  But I’ve uninstalled Band Master

and I continue to get the same error.







Mike, WA9PIE







From: Michael G. Carper [mailto:mike@...]

Sent: Wednesday, October 21, 2009 1:41 PM

To: dxatlas_group@yahoogroups.com

Subject: RE: [dxatlas] Has anyone else seen this error?







Yes, it’s the same message every time.







Here’s a link to it:







http://www.wa9pie.net/OmniRig-Crash.jpg







It installs with LogWindow and BandMaster… or can be installed separately.







…a long time ago… it worked when installing LogWindow.  But after installing

BandMaster, it produced this error.  I’ve deinstalled all of it and started

from scratch and I get the same thing.







Mike







From: dxatlas_group@yahoogroups.com [mailto:dxatlas_group@yahoogroups.com]

On Behalf Of Dave Baxter

Sent: Wednesday, October 21, 2009 12:15 PM

To: dxatlas_group@yahoogroups.com

Subject: RE: [dxatlas] Has anyone else seen this error?











Hi Mike.



You'll have to quote with text what the error message is, as the

Y-Groupmail logic stripped any attachment you may have sent.



Is it the exact same message each and every time?



Has it ever worked OK without error? If so, what has changed elsewhere

on the PC, new app's, app's removed, changed hardware etc etc, any

change however trivial.



Also, what exact version of Windows are you using? As well as the exact

versions of the associated programs your using, and what rigs, just in

case...



It all helps us to try to figure what's happening, or not..



Cheers.



Dave G0WBX.



--- Original Message ---

Posted by: "Michael G. Carper"

Tue Oct 20, 2009 1:44 pm (PDT)



I get this constantly whenever I launch BandMaster or any other

application

that uses OmniRig.



My only work-around is to launch OmniRig directly FIRST. leave the

application running (Rig1, Rig2, About). launch BandMaster (or

LogWindow).

and the application works fine. I hit "OK" in the OmniRig dialog box and

it

all works fine. until I shut down the application using OmniRig. than I

repeat the whole process.



Mike, WA9PIE



[Non-text portions of this message have been removed]











[Non-text portions of this message have been removed]

Hi Mike,



To restore the version of OmniRig that comes with LogWindow, uninstall your

current OmniRig via Add/Remove Programs and re-install LogWindow. You do not

have to touch Band Master, it is supposed to work fine with the old OmniRig.



73 Alex VE3NEA







----- Original Message -----

From: "Michael G. Carper" <mike@...>

To: <dxatlas_group@yahoogroups.com>

Sent: Tuesday, December 22, 2009 9:25 AM

Subject: RE: [dxatlas] Has anyone else seen this error?





It's been a while since I've brought this up, but I could use some help.







Since writing the original note, I have completely wiped my hard drive and

installed Windows7.  Upon reinstalling my programs, I was able to re-create

the problem - which now won't go away.  The steps were:



·         Install LogWindow 4.5.1.4; this installs a version of OmniRig



o   Upon taking this step, I tested this and both LogWindow and OmniRig

worked fine.



·         Install Band Master; this also wants to install a version of

OmniRig



o   During this step, the install asks me to shut down other versions of

OmniRig that are running; so I did (shut down LogWindow and OmniRig)



o   After completing this step, OmniRig generates the error in the link

below.



§  Band Master will not run.



§  LogWindow will generate this error when attempting to launch OmniRig



§  My work-around is (as it has been) to launch OmniRig first, then launch

LogWindow.  This is strange, given that you'd otherwise not be required to

launch OmniRig first in order to avoid an error in Band Master, LogWindow,

or another program that calls OmniRig.







Thoughts?







In general, I'd be quite pleased if I could just go back to the way it was

before I attempted to install Band Master.  But I've uninstalled Band Master

and I continue to get the same error.







Mike, WA9PIE

I’ll try that, Alex.  Thanks.







My only concern is – there doesn’t seem to be a way to install Band Master

without installing the version of OR that’s in that MSI.  As a result, I

haven’t reinstalled BM.







But I’ll uninstall LW and try installing it again and see how that goes.







Mike, WA9PIE







From: dxatlas_group@yahoogroups.com [mailto:dxatlas_group@yahoogroups.com]

On Behalf Of Alex, VE3NEA

Sent: Tuesday, December 22, 2009 10:22 AM

To: dxatlas_group@yahoogroups.com

Subject: Re: [dxatlas] Has anyone else seen this error?











Hi Mike,



To restore the version of OmniRig that comes with LogWindow, uninstall your

current OmniRig via Add/Remove Programs and re-install LogWindow. You do not



have to touch Band Master, it is supposed to work fine with the old OmniRig.



73 Alex VE3NEA



----- Original Message -----

From: "Michael G. Carper" <mike@... <mailto:mike%40wa9pie.net> >

To: <dxatlas_group@yahoogroups.com <mailto:dxatlas_group%40yahoogroups.com>

>

Sent: Tuesday, December 22, 2009 9:25 AM

Subject: RE: [dxatlas] Has anyone else seen this error?



It's been a while since I've brought this up, but I could use some help.



Since writing the original note, I have completely wiped my hard drive and

installed Windows7. Upon reinstalling my programs, I was able to re-create

the problem - which now won't go away. The steps were:



· Install LogWindow 4.5.1.4; this installs a version of OmniRig



o Upon taking this step, I tested this and both LogWindow and OmniRig

worked fine.



· Install Band Master; this also wants to install a version of

OmniRig



o During this step, the install asks me to shut down other versions of

OmniRig that are running; so I did (shut down LogWindow and OmniRig)



o After completing this step, OmniRig generates the error in the link

below.



§ Band Master will not run.



§ LogWindow will generate this error when attempting to launch OmniRig



§ My work-around is (as it has been) to launch OmniRig first, then launch

LogWindow. This is strange, given that you'd otherwise not be required to

launch OmniRig first in order to avoid an error in Band Master, LogWindow,

or another program that calls OmniRig.



Thoughts?



In general, I'd be quite pleased if I could just go back to the way it was

before I attempted to install Band Master. But I've uninstalled Band Master

and I continue to get the same error.



Mike, WA9PIE











[Non-text portions of this message have been removed]

Well, I tried that.







I uninstalled OmniRig.  I uninstalled LogWindow.  I searched to make sure

there were no related files remaining.





Then I reinstalled LogWindow (which installs an older version of OmniRig).







Now, the problem is worse.  I can’t run OmniRig at all without the error

(you access it from within LogWindow).







…pardon my frustration.  And I haven’t even gotten back to the idea of

reinstalling BandMaster.







Thoughts?







Mike, WA9PIE







From: Michael G. Carper [mailto:mike@...]

Sent: Wednesday, December 23, 2009 1:02 PM

To: dxatlas_group@yahoogroups.com

Subject: RE: [dxatlas] Has anyone else seen this error?







I’ll try that, Alex.  Thanks.







My only concern is – there doesn’t seem to be a way to install Band Master

without installing the version of OR that’s in that MSI.  As a result, I

haven’t reinstalled BM.







But I’ll uninstall LW and try installing it again and see how that goes.







Mike, WA9PIE







From: dxatlas_group@yahoogroups.com [mailto:dxatlas_group@yahoogroups.com]

On Behalf Of Alex, VE3NEA

Sent: Tuesday, December 22, 2009 10:22 AM

To: dxatlas_group@yahoogroups.com

Subject: Re: [dxatlas] Has anyone else seen this error?











Hi Mike,



To restore the version of OmniRig that comes with LogWindow, uninstall your

current OmniRig via Add/Remove Programs and re-install LogWindow. You do not



have to touch Band Master, it is supposed to work fine with the old OmniRig.



73 Alex VE3NEA



----- Original Message -----

From: "Michael G. Carper" <mike@... <mailto:mike%40wa9pie.net> >

To: <dxatlas_group@yahoogroups.com <mailto:dxatlas_group%40yahoogroups.com>

>

Sent: Tuesday, December 22, 2009 9:25 AM

Subject: RE: [dxatlas] Has anyone else seen this error?



It's been a while since I've brought this up, but I could use some help.



Since writing the original note, I have completely wiped my hard drive and

installed Windows7. Upon reinstalling my programs, I was able to re-create

the problem - which now won't go away. The steps were:



· Install LogWindow 4.5.1.4; this installs a version of OmniRig



o Upon taking this step, I tested this and both LogWindow and OmniRig

worked fine.



· Install Band Master; this also wants to install a version of

OmniRig



o During this step, the install asks me to shut down other versions of

OmniRig that are running; so I did (shut down LogWindow and OmniRig)



o After completing this step, OmniRig generates the error in the link

below.



§ Band Master will not run.



§ LogWindow will generate this error when attempting to launch OmniRig



§ My work-around is (as it has been) to launch OmniRig first, then launch

LogWindow. This is strange, given that you'd otherwise not be required to

launch OmniRig first in order to avoid an error in Band Master, LogWindow,

or another program that calls OmniRig.



Thoughts?



In general, I'd be quite pleased if I could just go back to the way it was

before I attempted to install Band Master. But I've uninstalled Band Master

and I continue to get the same error.



Mike, WA9PIE











[Non-text portions of this message have been removed]

I found something that resolved the problem (using Process Monitor from

www.sysinternals.com).  The registry key:







HKCR\TypeLib\{4FE359C5-A58F-459D-BE95-CA559FB4F270}\1.0\0\win32\(Default)



(which has a value of C:\PROGRA~1\LOGWIN~1.5\BIN\OmniRig.exe)







Needed to have Full Control for the user.  Upon fixing that, the program now

launches OmniRig normally.







I still get an ED (Extra Decimal) problem from within LogWindow – but I’m

guessing it’s coding in LogWindow that needs fixed.  I used the Client to

test OmniRig and that all worked fine.







Mike, WA9PIE







From: Michael G. Carper [mailto:mike@...]

Sent: Sunday, December 27, 2009 10:45 PM

To: dxatlas_group@yahoogroups.com

Subject: RE: [dxatlas] Has anyone else seen this error?







Well, I tried that.







I uninstalled OmniRig.  I uninstalled LogWindow.  I searched to make sure

there were no related files remaining.





Then I reinstalled LogWindow (which installs an older version of OmniRig).







Now, the problem is worse.  I can’t run OmniRig at all without the error

(you access it from within LogWindow).







…pardon my frustration.  And I haven’t even gotten back to the idea of

reinstalling BandMaster.







Thoughts?







Mike, WA9PIE







From: Michael G. Carper [mailto:mike@...]

Sent: Wednesday, December 23, 2009 1:02 PM

To: dxatlas_group@yahoogroups.com

Subject: RE: [dxatlas] Has anyone else seen this error?







I’ll try that, Alex.  Thanks.







My only concern is – there doesn’t seem to be a way to install Band Master

without installing the version of OR that’s in that MSI.  As a result, I

haven’t reinstalled BM.







But I’ll uninstall LW and try installing it again and see how that goes.







Mike, WA9PIE







From: dxatlas_group@yahoogroups.com [mailto:dxatlas_group@yahoogroups.com]

On Behalf Of Alex, VE3NEA

Sent: Tuesday, December 22, 2009 10:22 AM

To: dxatlas_group@yahoogroups.com

Subject: Re: [dxatlas] Has anyone else seen this error?











Hi Mike,



To restore the version of OmniRig that comes with LogWindow, uninstall your

current OmniRig via Add/Remove Programs and re-install LogWindow. You do not



have to touch Band Master, it is supposed to work fine with the old OmniRig.



73 Alex VE3NEA



----- Original Message -----

From: "Michael G. Carper" <mike@... <mailto:mike%40wa9pie.net> >

To: <dxatlas_group@yahoogroups.com <mailto:dxatlas_group%40yahoogroups.com>

>

Sent: Tuesday, December 22, 2009 9:25 AM

Subject: RE: [dxatlas] Has anyone else seen this error?



It's been a while since I've brought this up, but I could use some help.



Since writing the original note, I have completely wiped my hard drive and

installed Windows7. Upon reinstalling my programs, I was able to re-create

the problem - which now won't go away. The steps were:



· Install LogWindow 4.5.1.4; this installs a version of OmniRig



o Upon taking this step, I tested this and both LogWindow and OmniRig

worked fine.



· Install Band Master; this also wants to install a version of

OmniRig



o During this step, the install asks me to shut down other versions of

OmniRig that are running; so I did (shut down LogWindow and OmniRig)



o After completing this step, OmniRig generates the error in the link

below.



§ Band Master will not run.



§ LogWindow will generate this error when attempting to launch OmniRig



§ My work-around is (as it has been) to launch OmniRig first, then launch

LogWindow. This is strange, given that you'd otherwise not be required to

launch OmniRig first in order to avoid an error in Band Master, LogWindow,

or another program that calls OmniRig.



Thoughts?



In general, I'd be quite pleased if I could just go back to the way it was

before I attempted to install Band Master. But I've uninstalled Band Master

and I continue to get the same error.



Mike, WA9PIE











[Non-text portions of this message have been removed]