I'm not Pete but just wanted to check to see if you had your GPS message (if running G mode) programmed right. If running A mode then having your unproto...
Pete, Thanks for the reply. Nothing has changed with the rig and I used the Garmin gps with Drats to undate my qth so that appears to be working properly. I'm...
Hi Group, Do we have a list of mobile VHF and UHF radios checked for 4800 bps GMSK mode? My positive results with YAESU FT-897, IC-281H. Negative: Alinco...
I'm using a old GE Phoenix http://www.qsl.net/w4xe/rpttech/rpttech211.htm with a node adapter. There are many variants, and you can usually get one for $25....
Karen, http://groups.yahoo.com/group/gmsk_dv_node/files/Radio%20Files/ I've had success with FT-847 and FT-817, also ID-880H packet port. ... John D. Hays K7VE...
Your voice and the RF header have forward error correction; the data bits do not. That is why the "serial data" starts taking errors long before you will ever...
Karen, I'm using an FT-2600 with the Star*Board. This radio was also advertised as being "Packet Ready." It has a DB-9 connector on the rear panel and is ...
... On the other side - given a packet ready radio that is listed here as working - what's the link/list to the Star*board or node adapter that is needed to do...
Bill, I think the last question has more to do with the software than with the Star*Board or the radio. We've tested DRats with a computer and radio, but not...
"F.S.: One post per personal For Sale item, negotiations off-list. No SOLD, PRICE REDUCED or eBay repostings. Thank you!" dstar_digital is not a swap list....
Brad, thank you for the advice and link - I found there a useful document - "Building A D-Star Hotspot at KV5V" - good and detailed description. Karen, RA3APW...
Pete, Thanks I'm not ready to give up on the old IC-2200H just yet hi. The last seen location and message on Arps.fi was around Oct 2011 then I headed east to...
... Isn't that for a hot-spot solution? I need a way to use my existing non-D* (yet) radios to get on to some friends local DStar machines... Thanks, Bill...
Bill, If you had or borrowed a DVDongle (for the AMBE chip), you can do it with this project: http://db0fhn.efi.fh-nuernberg.de/~g4klx/digitalvoice.html ... ...
... You can use one of those boards (or alternatively a soundcard), but you will also need a DV Dongle (to process the audio) and G4KLX's "Digital Voice"...
Bert/Pete: Fwiw- I've been talking to Mike quite a bit (AG5CQ) on W0CDS port C lately. Although he isn't running dprs (yet) he has not seen any of the...
The reason the Icom manual doesn't mention anything about the C1 message is because Icom didn't invent D-PRS. We hams in the US created the spec when D-STAR...
Pete, Thanks again! Will follow the url. Looks like D-STAR has grown beyond anything ICOM imagined. I still have not seen anyone on "W0CDS" port C get posted...
Are you using WinDV on the 2600m? If so, what are your settings . I am having difficulty getting mine to work reliable. Dennis, N5VRP ... -- Dennis, N5VRP ...
