Hello

I'm completely new to digital SSTV, and am in need of some advice.

The local digital group uses hampal on 2m. I have an ft-8900R and a
computer running XP. The computer has both USB and a soundcard that I
dont use for anything else.

So, what I need is some advice about interfacing these two components
so that digital (hampal) on 2m will work for me.

I'm open to any and all suggestions, both "build-my-own" and off the
shelf buy.

Thanks

Tim R
VK4YEH

Hi Tim,

Very easy to roll your own. All you need is 2 small
Isolation transformers and an Opto Isolator and some cable
and plugs. Do a Google search for "SSTV INTERFACE" and you
will find plenty of circuits.
There are many ready made units out there but they cost an
arm and a bit whereas you can make your own for about $10.
There are pinout details so you can interface direct to the
Data Port on the rear of the radio so that you do not have
to use the Microphone plug to get your sigs in to the radio.

Cheers,

Dave  VK2RD / VE3DFK

30MDG # 39
DMC # 775

--- In digsstv@yahoogroups.com, AA0OI <aa0oi@...> wrote:
>
> Hello:
> no message was attached,,, what is problem?? Looks like message is
in the subject window
>
> Garrett / AA0OI
>
>
>
> ----- Original Message ----
> From: randeddy <randeddy@...>
> To: digsstv@yahoogroups.com
> Sent: Sunday, December 30, 2007 9:45:12 PM
> Subject: [digsstv] easypal won't do any waterfall ops, been trying
for many months. windows xp.
>
> Hi Randeddy,I left my phone number in your phone messages, call
>   and i'll try to help you,
                 Jack  N8ABY
>
>
>
>
>
______________________________________________________________________
______________
> Never miss a thing.  Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>

Have you checked with the local hams to see what interface they use?
That would probably be the easiest method.  Barring that, I would think
any interface that works for WSJT would work (the one I use for WSJT
works fine for me with EasyPal).  Try a Google search on WSJT interface
and that should get you started.

Scott N0EDV
http://corbenflyer.tripod.com/
Gotta Fly or Gonna Die
Building RV-4 (Super Slow Build Version)



joel wrote:

> Hello
>
> I'm completely new to digital SSTV, and am in need of some advice.
>
> The local digital group uses hampal on 2m. I have an ft-8900R and a
> computer running XP. The computer has both USB and a soundcard that I
> dont use for anything else.
>
> So, what I need is some advice about interfacing these two components
> so that digital (hampal) on 2m will work for me.
>
> I'm open to any and all suggestions, both "build-my-own" and off the
> shelf buy.
>
> Thanks
>
> Tim R
> VK4YEH
>
>

Hello Guenter,

There is no msg when you save the .wav, only when you go to
tune or to send a waterfall pic or txt nothing happens for
20 seconds and then a pop-up saying ...
Unable to open file  *.wav  Try again

There is no file created at all in the user wav folder even
though you save it when created. Infact there are NO files
at all in the folder. It is empty

As I said in my previous post, I uninstalled and went back
to the 19th November version and all is ok!

Cheers

Dave  VK2RD / VE3DFK

30MDG # 39
DMC # 775

Thanks Scott.

yes I have talked to the local guys and they use a variety of
interfaces, but none use the ft-8900.  So, I thought I'd ask around a
bit further before I commit to anything.

It seems that just a couple of impedance matching transformers works
as well as any expensive gear for high signal areas, which I am in.

So, looks like a job for the soldering iron!

Tim R
VK4YEH

--- In digsstv@yahoogroups.com, Scott <acepilot@...> wrote:
>
> Have you checked with the local hams to see what interface they use?
> That would probably be the easiest method.  Barring that, I would think
> any interface that works for WSJT would work (the one I use for WSJT
> works fine for me with EasyPal).  Try a Google search on WSJT interface
> and that should get you started.
>
> Scott N0EDV
> http://corbenflyer.tripod.com/
> Gotta Fly or Gonna Die
> Building RV-4 (Super Slow Build Version)
>
>
>
> joel wrote:
>
> > Hello
> >
> > I'm completely new to digital SSTV, and am in need of some advice.
> >
> > The local digital group uses hampal on 2m. I have an ft-8900R and a
> > computer running XP. The computer has both USB and a soundcard that I
> > dont use for anything else.
> >
> > So, what I need is some advice about interfacing these two components
> > so that digital (hampal) on 2m will work for me.
> >
> > I'm open to any and all suggestions, both "build-my-own" and off the
> > shelf buy.
> >
> > Thanks
> >
> > Tim R
> > VK4YEH
> >
> >
>

As far as I know, most people just use audio transformers with a 1:1
turns ratio such as a 600 ohm:600 ohm transformer like commonly used in
computer modems, etc.  The big thing seems to be to keep the radio
ground separate from the PC ground to avoid ground loops (hum).
Optoisolators work great for the PTT line.

Scott N0EDV
http://corbenflyer.tripod.com/
Gotta Fly or Gonna Die
Building RV-4 (Super Slow Build Version)



joel wrote:

> Thanks Scott.
>
> yes I have talked to the local guys and they use a variety of
> interfaces, but none use the ft-8900. So, I thought I'd ask around a
> bit further before I commit to anything.
>
> It seems that just a couple of impedance matching transformers works
> as well as any expensive gear for high signal areas, which I am in.
>
> So, looks like a job for the soldering iron!
>
> Tim R
> VK4YEH
>
> --- In digsstv@yahoogroups.com <mailto:digsstv%40yahoogroups.com>,
> Scott <acepilot@...> wrote:
> >
> > Have you checked with the local hams to see what interface they use?
> > That would probably be the easiest method. Barring that, I would think
> > any interface that works for WSJT would work (the one I use for WSJT
> > works fine for me with EasyPal). Try a Google search on WSJT interface
> > and that should get you started.
> >
> > Scott N0EDV
> > http://corbenflyer.tripod.com/ <http://corbenflyer.tripod.com/>
> > Gotta Fly or Gonna Die
> > Building RV-4 (Super Slow Build Version)
> >
> >
> >
> > joel wrote:
> >
> > > Hello
> > >
> > > I'm completely new to digital SSTV, and am in need of some advice.
> > >
> > > The local digital group uses hampal on 2m. I have an ft-8900R and a
> > > computer running XP. The computer has both USB and a soundcard that I
> > > dont use for anything else.
> > >
> > > So, what I need is some advice about interfacing these two components
> > > so that digital (hampal) on 2m will work for me.
> > >
> > > I'm open to any and all suggestions, both "build-my-own" and off the
> > > shelf buy.
> > >
> > > Thanks
> > >
> > > Tim R
> > > VK4YEH
> > >
> > >
> >
>
>

I HAD DOWNLOADED MANY VERSIONS OF EASY PAL AND NEVER UNINSTALLED AND
CLEANED ANY RESIDUAL FILES FROM COMPUTER. AFTER THE FIST UNINSTALL AND
RUNNING WINDOWS CARE EASY PAL WORKED UNTILL I SHUT IT DOWN. UPON
STARTING EASY PAL IT WAS NO WATERFALL OPS AGAIN. BUT I JUST KEPT
UNINSTALLING EASY PAL AND HUNTING THROUGH DOCUMENTS AND SETTINGS,
PROGRAM FILES,ETC, AND DELETING ANYTHING OF EASY PAL AND THEN RUN
WINDOWS CARE REG. CLEANER AND RE DOWN LOADED (FROM AAR3BM.NET) AND
REINSTALLED EASY PAL AND FINALLY GOT AN ACTUAL FRESH DOWN LOAD THAT
DIDN'T KNOW MY CALL. IT SEEMS TO BE A CLUE THAT AFTER YOU DOWNLOAD A
NEW VERSION AND START IT UP, IF SETUP ALREADY KNOWS YOUR CALL, YOU ARE
ACTUALLY STILL RUNNING THE OLD VERSION, AND SOMETHING IS AMISS.

ANYWAY KD8EKX IS VERY HAPPY WITH THE NEW WORLD OF WATERFALL FEATURES.
MANY THANKS TO N8ABY FOR MANY HOURS OF HELP. AND THANKS FOR THE
RESPONSES.

Hi all,
Today I have started a SSTV & ATV only webring
Please take the time to join and add the ring banner

only just added the page on my site so bit messy
http://www.g0hwc.com/webring.htm

or if you just want to join:
http://www.alt-webring.com/cgi-bin/newsite.pl?ringid=SSTV_ATV_RING

Please remember this ring is ONLY for SSTV or ATV sites

Paul G0HWC


http://www.g0hwc.com

Hi all,
Well the SSTV/ATV web ring has only been going for a few days
and so far it has 7 active members.

1. G0HWC - G0HWC's SSTV

2. kc9kxz - Extreme Amateur Radio Networks

3. NelsSite - W0TUP SSTV Home Page

4. wd7f - WD7F'S SSTV CAM

5. k7ek - Welcome to K7EK.NET!

6. ke5rs - KE5RS Live SSTV

7. w3mrc - W3MRC Live SSTV Cam

More have joined but are not yet active as they need to add the
ring code to their sites.

When you get time please visit the Ring homepage for infoamation
http://www.g0hwc.com/webring.htm

Please join the Ring

Paul G0HWC

Can anyone tell me if there are any problems running
easypal on windows vista. For that mater how about problems
with mmtty and mmsstv??
Thanks
Lynn

Dear OM

      presently i am using the MFJ-1275 ("Soundcard-to-Rig Interface box) to
operate in digital modes.  MFJ-1275 is connected to the PC via Serial PORT
cable.

I am looking for  a "Soundcard-to-Rig Interface box" that can be connected
to the PC via USB Port, instead of  Serial PORT.

Any info about is welcome.
Pls reply to me also directly. THANKs

Best 73

Adriano  ik2cbd
Email:    ik2cbd@...
Web:     http://www.webalice.it/ik2cbd  (WinPack, UIview32, AGWPE, MIXW,
Logger32)
Packet:  ik2cbd@...
23807 Merate (LC)      WWL: JN45RQ  WAIS: AS17      ARI: 820064
Skype me:      ik2cbd.adriano1938
ooVoo me:      ik2cbd.adriano1938

Hi lyn,

No problems at all. Runs well.
I am using Vista Ultimate.

Can not advise on MMSSTV or MMTTY as I do not use them.

Regards

Dave  VK2RD / VE3DFK

30MDG # 39
DMC # 775

----- Original Message -----

From: lynn67501

To: digsstv@yahoogroups.com

Sent: Saturday, January 12, 2008 7:21 PM

Subject: [digsstv] windows vista

Can anyone tell me if there are any problems running
easypal on windows vista. For that mater how about problems
with mmtty and mmsstv??
Thanks
Lynn

---

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.19.1/1220 - Release Date: 11/01/2008 18:09

----- Original Message -----

From: Kirk

To: digsstv@yahoogroups.com

Sent: Sunday, January 13, 2008 10:29 AM

Subject: RE: [digsstv] EasyPal and Signalink

Stan,

Had exactly the same problem but not on all bands.  Figured out that I had RF getting back into the computer.  Used some #31 snap on ferrites and all is now well.

Kirk, K6KAR

Niceville, FL

From: digsstv@yahoogroups.com [mailto:digsstv@yahoogroups.com] On Behalf Of Stan
Sent: Sunday, January 13, 2008 9:18 AM
To: digsstv@yahoogroups.com
Subject: [digsstv] EasyPal and Signalink

Hi All,

Seems that when I run EasyPal with the Signalink USB it reboots my computer on occasion. I have tried several fixes and cannot stop it. It is apparently the combination that creates the problem because if I am running DigiPan for instance there is no problem. And EasyPal runs fine with other interfaces.

I wonder if others have had such a problem? If so what did you do to fix it.

Stan Engel,
WA2UET

I am using a SignaLink/USB with my TS-480SAT running about
25W on PSK31 and about 40W-50W on EasyPal with no problems.
I really enjoy the solid SignaLink/USB, I never have to
worry about it or mess with levels like I did using a sound
card before.

Yes, I am using ferrite chokes on all lines. I had so much
trouble with my Software Defined Radio and RFI that I have
made it a regular part of my installations now.

GL de Ken N9VV

Stan wrote:
>
>
> This is just on receive Kirk. I haven't even tried to transmit with the
> Signalink yet.
>
> Stan
>
>
>     ----- Original Message -----
>     *From:* Kirk <mailto:kirk.harding@...>
>     *To:* digsstv@yahoogroups.com <mailto:digsstv@yahoogroups.com>
>     *Sent:* Sunday, January 13, 2008 10:29 AM
>     *Subject:* RE: [digsstv] EasyPal and Signalink
>
>     Stan,
>
>     Had exactly the same problem but not on all bands.  Figured out that
>     I had RF getting back into the computer.  Used some #31 snap on
>     ferrites and all is now well.
>
>     Kirk, K6KAR
>
>     Niceville, FL
>
>     *From:* digsstv@yahoogroups.com <mailto:digsstv@yahoogroups.com>
>     [mailto:digsstv@yahoogroups.com] *On Behalf Of *Stan
>     *Sent:* Sunday, January 13, 2008 9:18 AM
>     *To:* digsstv@yahoogroups.com <mailto:digsstv@yahoogroups.com>
>     *Subject:* [digsstv] EasyPal and Signalink
>
>     Hi All,
>
>     Seems that when I run EasyPal with the Signalink USB it reboots my
>     computer on occasion. I have tried several fixes and cannot stop it.
>     It is apparently the combination that creates the problem because if
>     I am running DigiPan for instance there is no problem. And EasyPal
>     runs fine with other interfaces.
>
>     I wonder if others have had such a problem? If so what did you do to
>     fix it.
>
>     Stan Engel,
>     WA2UET
>
>
>
>
> ------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.19.2/1222 - Release Date: 1/13/2008
12:23 PM

----- Original Message -----

From: Ken N9VV

To: digsstv@yahoogroups.com

Sent: Sunday, January 13, 2008 11:29 AM

Subject: Re: [digsstv] EasyPal and Signalink

I am using a SignaLink/USB with my TS-480SAT running about
25W on PSK31 and about 40W-50W on EasyPal with no problems.
I really enjoy the solid SignaLink/USB, I never have to
worry about it or mess with levels like I did using a sound
card before.

Yes, I am using ferrite chokes on all lines. I had so much
trouble with my Software Defined Radio and RFI that I have
made it a regular part of my installations now.

GL de Ken N9VV

Stan wrote:
>
>
> This is just on receive Kirk. I haven't even tried to transmit with the
> Signalink yet.
>
> Stan
>
>
> ----- Original Message -----
> *From:* Kirk <mailto:kirk.harding@cox.net>
> *To:* digsstv@yahoogroups.com <mailto:digsstv@yahoogroups.com>
> *Sent:* Sunday, January 13, 2008 10:29 AM
> *Subject:* RE: [digsstv] EasyPal and Signalink
>
> Stan,
>
> Had exactly the same problem but not on all bands. Figured out that
> I had RF getting back into the computer. Used some #31 snap on
> ferrites and all is now well.
>
> Kirk, K6KAR
>
> Niceville, FL
>
> *From:* digsstv@yahoogroups.com <mailto:digsstv@yahoogroups.com>
> [mailto:digsstv@yahoogroups.com] *On Behalf Of *Stan
> *Sent:* Sunday, January 13, 2008 9:18 AM
> *To:* digsstv@yahoogroups.com <mailto:digsstv@yahoogroups.com>
> *Subject:* [digsstv] EasyPal and Signalink
>
> Hi All,
>
> Seems that when I run EasyPal with the Signalink USB it reboots my
> computer on occasion. I have tried several fixes and cannot stop it.
> It is apparently the combination that creates the problem because if
> I am running DigiPan for instance there is no problem. And EasyPal
> runs fine with other interfaces.
>
> I wonder if others have had such a problem? If so what did you do to
> fix it.
>
> Stan Engel,
> WA2UET
>
>
>
>
> ----------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.19.2/1222 - Release Date: 1/13/2008 12:23 PM

----- Original Message -----

From: AA0OI

To: digsstv@yahoogroups.com

Sent: Sunday, January 13, 2008 1:10 PM

Subject: Re: [digsstv] EasyPal and Signalink

Hi Ken:

does it reboot if EasyPal not turned on?

does it reboot if SignaLink unplugged?

Does it only happen with EasyPal or other digital modes aswell?

Let me know,,,

 

Garrett / AA0OI

----- Original Message ----
From: Stan <wa2uet@taconic.net>
To: digsstv@yahoogroups.com
Sent: Sunday, January 13, 2008 10:44:31 AM
Subject: Re: [digsstv] EasyPal and Signalink

Everybody loves their Signalink Ken, that's why I bought it. And it works great here with my FT-857, but something is re-booting my computer. I can't figure out if it is the software or the Signalink, I suspect the combination is the fault.

 

I am only listening at this point so it cannot be a RF problem.

 

Stan

 

----- Original Message -----

From: Ken N9VV

To: digsstv@yahoogroups .com

Sent: Sunday, January 13, 2008 11:29 AM

Subject: Re: [digsstv] EasyPal and Signalink

I am using a SignaLink/USB with my TS-480SAT running about
25W on PSK31 and about 40W-50W on EasyPal with no problems.
I really enjoy the solid SignaLink/USB, I never have to
worry about it or mess with levels like I did using a sound
card before.

Yes, I am using ferrite chokes on all lines. I had so much
trouble with my Software Defined Radio and RFI that I have
made it a regular part of my installations now.

GL de Ken N9VV

Stan wrote:
>
>
> This is just on receive Kirk. I haven't even tried to transmit with the
> Signalink yet.
>
> Stan
>
>
> ----- Original Message -----
> *From:* Kirk <mailto:kirk.harding@ cox.net>
> *To:* digsstv@yahoogroups .com <mailto:digsstv@yahoogroups .com>
> *Sent:* Sunday, January 13, 2008 10:29 AM
> *Subject:* RE: [digsstv] EasyPal and Signalink
>
> Stan,
>
> Had exactly the same problem but not on all bands. Figured out that
> I had RF getting back into the computer. Used some #31 snap on
> ferrites and all is now well.
>
> Kirk, K6KAR
>
> Niceville, FL
>
> *From:* digsstv@yahoogroups .com <mailto:digsstv@yahoogroups .com>
> [mailto:digsstv@yahoogroups .com] *On Behalf Of *Stan
> *Sent:* Sunday, January 13, 2008 9:18 AM
> *To:* digsstv@yahoogroups .com <mailto:digsstv@yahoogroups .com>
> *Subject:* [digsstv] EasyPal and Signalink
>
> Hi All,
>
> Seems that when I run EasyPal with the Signalink USB it reboots my
> computer on occasion. I have tried several fixes and cannot stop it.
> It is apparently the combination that creates the problem because if
> I am running DigiPan for instance there is no problem. And EasyPal
> runs fine with other interfaces.
>
> I wonder if others have had such a problem? If so what did you do to
> fix it.
>
> Stan Engel,
> WA2UET
>
>
>
>
> ------------ --------- --------- --------- --------- --------- -
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.19.2/1222 - Release Date: 1/13/2008 12:23 PM

---

Looking for last minute shopping deals? Find them fast with Yahoo! Search.

----- Original Message -----

From: Kirk

To: digsstv@yahoogroups.com

Sent: Sunday, January 13, 2008 1:27 PM

Subject: RE: [digsstv] EasyPal and Signalink

Stan,

You’ve may have already tried this but suggest you boot your computer in the safe mode.  This will allow you to step through the various programs you’re running.  You can then load each program individually instead of in batch.  This may lead you to the program which is causing the reboot condition.  Did the problem start when you installed Signalink drivers?

Just a thought.

Regards,

Kirk, K6KAR

Niceville, FL

From: digsstv@yahoogroups.com [mailto:digsstv@yahoogroups.com] On Behalf Of Stan
Sent: Sunday, January 13, 2008 10:45 AM
To: digsstv@yahoogroups.com
Subject: Re: [digsstv] EasyPal and Signalink

Everybody loves their Signalink Ken, that's why I bought it. And it works great here with my FT-857, but something is re-booting my computer. I can't figure out if it is the software or the Signalink, I suspect the combination is the fault.

I am only listening at this point so it cannot be a RF problem.

Stan

----- Original Message -----

From: Ken N9VV

To: digsstv@yahoogroups.com

Sent: Sunday, January 13, 2008 11:29 AM

Subject: Re: [digsstv] EasyPal and Signalink

I am using a SignaLink/USB with my TS-480SAT running about
25W on PSK31 and about 40W-50W on EasyPal with no problems.
I really enjoy the solid SignaLink/USB, I never have to
worry about it or mess with levels like I did using a sound
card before.

Yes, I am using ferrite chokes on all lines. I had so much
trouble with my Software Defined Radio and RFI that I have
made it a regular part of my installations now.

GL de Ken N9VV

Stan wrote:
>
>
> This is just on receive Kirk. I haven't even tried to transmit with the
> Signalink yet.
>
> Stan
>
>
> ----- Original Message -----
> *From:* Kirk <mailto:kirk.harding@cox.net>
> *To:* digsstv@yahoogroups.com <mailto:digsstv@yahoogroups.com>
> *Sent:* Sunday, January 13, 2008 10:29 AM
> *Subject:* RE: [digsstv] EasyPal and Signalink
>
> Stan,
>
> Had exactly the same problem but not on all bands. Figured out that
> I had RF getting back into the computer. Used some #31 snap on
> ferrites and all is now well.
>
> Kirk, K6KAR
>
> Niceville, FL
>
> *From:* digsstv@yahoogroups.com <mailto:digsstv@yahoogroups.com>
> [mailto:digsstv@yahoogroups.com] *On Behalf Of *Stan
> *Sent:* Sunday, January 13, 2008 9:18 AM
> *To:* digsstv@yahoogroups.com <mailto:digsstv@yahoogroups.com>
> *Subject:* [digsstv] EasyPal and Signalink
>
> Hi All,
>
> Seems that when I run EasyPal with the Signalink USB it reboots my
> computer on occasion. I have tried several fixes and cannot stop it.
> It is apparently the combination that creates the problem because if
> I am running DigiPan for instance there is no problem. And EasyPal
> runs fine with other interfaces.
>
> I wonder if others have had such a problem? If so what did you do to
> fix it.
>
> Stan Engel,
> WA2UET
>
>
>
>
> ----------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.19.2/1222 - Release Date: 1/13/2008 12:23 PM

No problems with all the programs you mentioned, I run all of them. easypal is
specifically targeted to Vista, that is to say the programming and the compiller
are run on a Vista machine as I under stand it.
The sound setup for all those programs is not an issue either if you take into
account learning how Vista uses sound and the sound drivers.  First of all go to
Control panel and configure your sound under the Sound menue. You'll figure it
out.
73 de k4xtt

On Sat, 12 Jan 2008 19:21:19 -0000
"lynn67501" <n0alo@...> wrote:

> Can anyone tell me if there are any problems running
> easypal on windows vista. For that mater how about problems
> with mmtty and mmsstv??
> Thanks
> Lynn
>
>


--
vic <ke4lkq@...>

----- Original Message -----
From: Stan
To: digsstv@yahoogroups.com
Sent: Sunday, January 13, 2008 8:18 AM
Subject: [digsstv] EasyPal and Signalink


Hi All,
Seems that when I run EasyPal with the Signalink USB it reboots my computer
on occasion. I have tried several fixes and cannot stop it. It is apparently
the combination that creates the problem because if I am running DigiPan for
instance there is no problem. And EasyPal runs fine with other interfaces.

I wonder if others have had such a problem? If so what did you do to fix it.

Stan Engel,
WA2UET
++++++++++++
Stan
     I run Vista Home Premium with the Signalink USB and can run Easypal,
Digipan and Mixw all at the same time with no problem.
Bud - KV7G- Glenrock, WY

Stan
http://www.newegg.com has a powered USB hub for $9 :-)
sounds like it could be your mobo USB implementation
de ken n9vv


Bud Haynes wrote:
>
>
>
> ----- Original Message -----
> From: Stan
> To: digsstv@yahoogroups.com <mailto:digsstv%40yahoogroups.com>
> Sent: Sunday, January 13, 2008 8:18 AM
> Subject: [digsstv] EasyPal and Signalink
>
> Hi All,
> Seems that when I run EasyPal with the Signalink USB it reboots my computer
> on occasion. I have tried several fixes and cannot stop it. It is
> apparently
> the combination that creates the problem because if I am running DigiPan
> for
> instance there is no problem. And EasyPal runs fine with other interfaces.
>
> I wonder if others have had such a problem? If so what did you do to fix it.
>
> Stan Engel,
> WA2UET
> ++++++++++++