Hi Tony Have you done some test comparing ros with mods like psk31 , rtty , olivia etc? la5vna Steinar ... be interesting to see how the narrow mode compared...
How do you get win7 to discover new hardwear it doesn't find the eathernet or the sound cards now this is an older system ? Russ NC5O 1- Whoever said...
... Yes I have Steinar Tony -K2MO a5vna Steinar ... On 8/1/2010 7:31 AM, Steinar Aanesland wrote: Hi Tony Have you done some test comparing ros with mods like...
*IPS GEOSTAT ALERT NUMBER 103: STATUS 5 CME OBSERVED MAJOR GEOMAGNETIC STORM POSSIBLE WITHIN 2-4 DAYS ISSUED AT 1928 UT ON 01 Aug 2010 BY IPS RADIO AND SPACE...
Andy, Most of these are encrypted so don't expect much to read. A good one to try in the USA is on 8.4785MHz USB. They often run a test tape in the clear. When...
All, I spent a little time this weekend comparing FSK-Hell to the standard Feld Hell mode. FSK-Hell is a modified version of PSK-Hell which was developed to...
Hi Tony, I have often switched from FH to FSK-Hell when working the States from VK via the Long-Path on 20M when conditions are poor. Often switching to FSK...
Steinar, I've been monitoring ROS on-the-air and I've done some testing with the HF path simulator. In my opinion, it's about as good as one would expect from...
Hi Guys The Net14/Net28 News for July 2010 has been uploaded to www.net14.org.uk . Not a very exciting month with no contacts outside Europe reported for Net14...
... It does seem to make a a substantial difference on long-haul propagation Laurie. Please feel free to send me any screen shots you might have - it's always...
I think my FT-450 does that, just one pin on the CAT port, or the Data port, where is my manual ....page 74. ve3bdr From: IMR Sent: Tuesday, August 03, 2010...
I know that the old hamcom software does this . In rtty and cw mode is sends the data 1:1 out on a serial pin on the rs 232 . I know this exactly as I made a...
Simon Just checed the help file of mmtty ''Prepare for FSK'' it uses the COM port to out put the FSK signal .. much the same as CW-type uses the com...
And hamcom modem is cheap Just an opamp powerd from the rs232 .. Used as komparator So you need no soundcard ... What about using an si570 for the vfo? And...
On 10M tonight, from Mexico See attached, the image around 500 Hz is his MAIN signal with LOTS of side bars, and the image around 1700 Hz is also him ! Andy...
It's NOT an attachment - it's an embedded link. It looks pretty nasty too! Jeff -- KE7ACY ... From: mikea To: digitalradio@yahoogroups.com Sent: Tuesday,...
How will you get the shift correct? Doesn't have to be too exact but does have to be +/- 25% or so. I was thinking about this while walking the dog - for a...
