... Henk did an excellent job when he updated the digi_ned.txt file with version 0.4.0, take a look in there. There is also a README file with good info. kim -...
213
f4fwh
Mar 15, 2010 9:00 am
Hi, I've tried to run digined on linux but it seems that nothing is working, I've compile digined on AX25, configure my tnc in kiss mode, do the command...
214
Bill V WA7NWP
wa7nwp
Mar 15, 2010 5:51 pm
Can you confirm that the AX25 side is working. Do you see packet traffic with the listen (now axlisten?) command? Can you connect or beacon with the...
215
Dave Lewis
ke7auw
Mar 15, 2010 7:40 pm
See if you can get Xastir running on the port, then share it with Digi_Ned W7AUW is my new hamcall ________________________________ From: Bill V WA7NWP...
216
f4fwh
May 7, 2010 4:58 pm
Hello, I've some news from here, i've configured a new computer to work with digi_ned, configure AX25 etc... Attach my TNC in Kiss mode to ax25 ports, i can...
217
f4fwh
May 10, 2010 11:08 am
Ok after some more tests, digined receive trame. The launch command is now ./digined -p VHF -p HF -v, but I think that the speed of the send trame is not right...
218
Kim Aiken
ac7yy
May 10, 2010 5:36 pm
... You didn't mention the TNC you were using but yes you are correct. Set the HBAUD to your required packet rate PRIOR to placing the TNC into KISS mode. kim...
219
ml41782
Jun 6, 2010 7:39 pm
Hi, Im trying unsuccessfully to run 'utle' every 24 hours automatically. I'm already rebuilding and updating my tle file on the server every 24 hours. I wanted...
220
ml41782
Jul 1, 2010 11:01 pm
Problem was resolved...
221
ml41782
Jul 1, 2010 11:03 pm
Has anyone used the BLN messages in 0.4.0 ? We have an event coming up and I was testing what was there and expanding on it. I can't seem to get any of them to...
222
maxx2950
Jul 21, 2010 9:30 am
Hi, I am new to this group. My name is Geoffrey and my ham call is F4FXL. Being involved in APRS since january i am on the way to setup a fill-in digi to cover...
223
ac7yy
Aug 2, 2010 2:36 am
... I have trying (unsuccessfully) to add HO-68 to the database and recompiling. Since HO-68 operates FM at times, it is a SAT that I and others would like to...
224
ml41782
Aug 5, 2010 1:14 pm
Has anyone successfully setup a Kantronics 9612 plus TNC using both the 9600 & 1200 ports ?...
225
maxx2950
Aug 10, 2010 7:44 am
Ok i have been testing this setup and it is actually digipeating directly heard wide2-2 wide2-1 heard stations ! :) Just reworked the last rule to shorten...
226
Lynn W. Deffenbaugh (...
ldeffenb
Aug 10, 2010 10:42 am
For purposes of original path analysis based on the finally IGated packets, is the second rule really necessary? It totally removes the fact that the station...
227
Bill V WA7NWP
wa7nwp
Aug 10, 2010 4:18 pm
... In a previous discussion, I was in the minority thinking that the tiny bit of info lost was more than made up for by shortening the resulting packet. The...
228
Lynn W. Deffenbaugh (...
ldeffenb
Aug 10, 2010 4:52 pm
... It's lost from the perspective of APRS-IS based analysis. It would only be present within simplex of the station before the digipeat and lost to stations...
229
Bill V WA7NWP
wa7nwp
Aug 10, 2010 6:10 pm
... You only lose the info of what the path started with -- you still know it was two hops and who the digipeaters were. That's only when it's a used two hop...
230
ml41782
Aug 11, 2010 5:58 pm
I have been experimenting ( unsuccessfully) with passing traffic from one band to the other. I'm trying to pass traffic from 145.825 to the local area on...
231
maxx2950
Aug 12, 2010 7:00 am
Hello, What is the result you achieved using this setup ? 73 Geoffrey F4FXL...
232
ml41782
Aug 12, 2010 3:24 pm
Between Listening and watching the D700 and the computer running DigiNed This is where I'm at. I have had 3 open axlisten windows open and I have seen traffic...
233
maxx2950
Aug 12, 2010 8:12 pm
Hi, If you comment out all rules except this one digipeat: 2 WIDE1-1 3 swap DIGI_CALL,WIDE2-2 , what happens ?...
234
ml41782
Aug 14, 2010 12:14 am
That didn't work but this did: digipeat: all WIDE2-2 3 swap DIGI_CALL,WIDE2-1 Why the other didn't work I don't care. It eliminated 2 lines for one that I...
235
ml41782
Aug 21, 2010 8:33 pm
This is strange. About 3 weeks ago I got an answer from the system that the ISS wasn't in the database. I went back and looked and it is. I looked at both the...
236
ml41782
Aug 21, 2010 10:20 pm
I can't seem to find a way to limit which port to send out the data. It appears that the sat module will send out the satellite data on all ports. There is no...
237
ml41782
Aug 28, 2010 9:26 pm
I can't be the only one that has seen this ? There is no way to tell the sat module what ports to send out data on. Mike K4MQF...
238
ml41782
Aug 29, 2010 2:19 pm
In case anyone is interested.. This is what I was doing automessage: 100 2,3 ?sat now My fix automessage: 100 2 ?sat now automessage: 100 3 ?sat now ======= ...
239
ml41782
Aug 29, 2010 4:12 pm
NO this didn't work either...
240
Bill V WA7NWP
wa7nwp
Aug 29, 2010 4:13 pm
I'll soon have digi_ned back and running but I can't try out the sat beacons per port until then. I almost remember this being on the wish list way back when....
241
Arnaud F4EIR
ranaud80
Oct 9, 2010 8:19 am
Hello, This is my first time to try to make digined working. under xubuntu 9.10, i've compiled digined 4.0. At each start i have a "kiss_param error, expected...
