Has anybody done a mapping between the PECO Figure names in the CADRAIL Version 7 Figure Tools Library and the PECO product numbers as found in a Walthers...
97
Gary Waite
garyw@...
Jan 18, 2000 6:47 am
Hi! I use CADRail 7. I have my layout drawn in layers, so my Text is in its own layer. I place the text, then move and rotate to get it in the proper spot in...
98
PRINTMORE1@...
Jan 18, 2000 7:21 am
Hello Gary: My printer is a Canon BJC-250 (also a cheapie). I also rotated the text but DID NOT give it it's own layer and all printed out OK. A suggestion but...
99
Jack Haverty
jhaverty@...
Jan 16, 2001 7:43 am
I've had the same symptoms -- rotated text looks fine on the monitor but prints horizontally only and in the wrong size. Also, I have 2 printers - a...
100
Greg Moore
greg.moore@...
Jan 18, 2000 8:47 am
I have the same problem with my printers too. HP Laserjet and Deskjet less than 12 months old. It would be nice to have it work. Cheers Greg Moore Auckland,...
101
Joebrann@...
Jan 18, 2000 2:25 pm
In a message dated 1/18/00 1:50:21 AM Eastern Standard Time, garyw@... writes: << This problem occurs with my older high end Epson and with my new ...
102
Eric Jacobsen
jacobsen@...
Jan 18, 2000 2:50 pm
I've had the problem on an Epson Stylus 400 and an HP Laserjet 5Si/MX. Eric ... Eric Jacobsen - jacobsen@... - http://www.mc.edu/~jacobsen/ Come visit...
103
Jeff Scarbrough
jeff@...
Jan 18, 2000 2:41 pm
... Odd, I didn't see the original message - however - I had a similar problem with V.6 and a Canon BJC-610, which uses Canon's Windows Printing System to ...
104
Bernie Gonciarz
bgonciar@...
Jan 18, 2000 10:31 am
I've been reading about the problem you guys have been having. And I am currently having a slightly different problem with version 6.03. When I print ( Canon...
105
Tom Troughton, MMR
tomt491@...
Jan 18, 2000 4:34 pm
I also use CADRail 7.1 and made a simple test print job. I made a triangle with printing along each of the sides and printed it out. The printing looked...
106
Sandia Software
tracks@...
Jan 18, 2000 5:16 pm
Hi gang, As I have told some of you in detail, as far as I can determine, the problem with rotated text not printing correctly on some printers (mostly newer ...
107
Bob Shanteau
shanto@...
Jan 19, 2000 4:28 am
... Not quite. I just installed an original Win 95 without Internet Explorer along with CadRail 7.11. I also installed an HP-GL/2 plotter from the Win 95...
108
Sandia Software
tracks@...
Jan 19, 2000 7:05 pm
Bob, ... There you go. Thats the file I am talking about. Check the date of the mfc40.dll distributed with Cadrail version 7.02 and it is 7-31-96. There are ...
109
Jack Haverty
jhaverty@...
Jan 19, 2000 9:26 pm
... In years of using PCs/Windows, I've found that any time you install something, there's a good chance that something else will no longer work, exactly for...
110
Ray Lauffer
rlauffer@...
Jan 20, 2000 1:17 am
Hi, Been following this thread and thought I would let you know about my setup. Windows 98 First Edition with service pack 1 installed. Epson 740 printer...
111
PRINTMORE1@...
Jan 20, 2000 2:30 am
I too have been following this thread and did submit a suggestion. However from what I read my suggestion did not solve the problem. I did a find on my hard...
112
Tom Troughton, MMR
tomt491@...
Jan 20, 2000 3:57 am
Hi guys, I've also been following this thread and thought I would let you know about my situation. I just did a "Find" for mfc40.dll and found one dated...
113
Ernie Fisch
ernfisch@...
Jan 20, 2000 4:26 am
In <003c01bf61d7$f6cdd250$05000001@toms686>, on 01/19/00 at 09:26 PM, "Sandia Software" <tracks@...> said: Gang, Just for giggles I tried the...
114
Bob Shanteau
shanto@...
Jan 20, 2000 7:34 pm
My point is that rotated text in Cadrail 7 has NEVER worked with some plotter drivers, so it must have slipped by in the beta testing. I understand that...
115
PRINTMORE1@...
Jan 20, 2000 7:56 pm
Total cost of proposed drivers appear to be about $375.00. Our hobby is Model Railroads and Cadrail is to help us plan our layout without having to resort to...
116
Greg MOORE
greg.moore@...
Jan 20, 2000 8:58 pm
Leonard I absolutely agree that Cadrail is an excellent tool, one that I wouldn't be without. Almost as much fun as building (some would suggest more). The...
117
Jack Haverty
jhaverty@...
Jan 20, 2000 10:50 pm
As someone who has spent 20 years in the software industry, I think you're right -- features like rotated text are nice to have, but not critical. However,...
118
PRINTMORE1@...
Jan 20, 2000 11:48 pm
Hello Greg: As I stated previously I have only one of the bad (?) files mfc40.dll in my win98 located in the window/systems. I use a low price printer, a Canon...
119
PRINTMORE1@...
Jan 21, 2000 12:15 am
Hello Jack: If you go to the sandia web site there is mention of this rotation text problem under Ver.7 questions. It is not the same as a readme file on the...
120
Sandia Software
tracks@...
Jan 21, 2000 2:59 am
Bob, ... Hmm, welp, maybe not, I cant say for sure that rotated text ever worked on a plotter, I guess. Been a year or two since we did that part of Cadrail. I...
121
Sandia Software
tracks@...
Jan 21, 2000 4:14 am
RE DLLs and other files: Well, I dont plan on making a habit of giving lectures here (the crowd cheers), but maybe some will find this useful? Making the usual...
122
Sandia Software
tracks@...
Jan 22, 2000 9:09 pm
Help us test a new routine to print rotated text by downloading and running a small sample application (13KB). Go to: http://sandiasoftware.com/betas and...
123
Bruce Wilson
bwilson@...
Jan 26, 2000 1:17 am
I have followed this thread and for the fun of it tired to print rotated fonts using VisualCadd 2.0.4, AutoCad LT97 and CadRail 7.1.1. The rotations I used...
124
Mike Curtis
macurtis@...
Jan 26, 2000 4:08 am
Tom, My results are: a. Ok, rotated fine. b. I have cadrail 7.10 and it will not rotate text for printing. The Print results in text at 0 degrees at all...
125
Ross Hunter
xhunter@...
Jan 31, 2000 11:24 pm
I'm a bit late coming to this topic and don't have any help to offer; just an observation. I run CadRail 7.11 using Virtual PC on a G3 Macintosh. I was curious...
