Harold, As Keith explained, the key word here is that Cadrail gives you the ability to "TRACE" over photos as opposed to "CONVERT". So you load a bitmap photo ...
Sandia Software
tracks@...
May 1, 2004 2:07 pm
948
Hi all, You can not flip up a circle, just lines. It just has not been implemented in the tool. I will add it to the wish list for future versions. Tom Sandia...
Sandia Software
tracks@...
May 1, 2004 2:07 pm
949
Jason, Ok, here is the problem: a "TURNOUT" in Cadrail lingo is made of 3 lines as defined in the Figures-Turnout part (page 81) of the manual. In this case, ...
Sandia Software
tracks@...
May 1, 2004 2:07 pm
950
Hi all, Welp, maybe I will elaborate on this some more. Cadrail really does not support Circles in 3d, from a true sense of the phrase. You can draw an ARC...
Sandia Software
tracks@...
May 1, 2004 2:53 pm
951
... Thanks, Tom -- that clears things up. I didn't think about compatibility with previous versions, so I couldn't figure out why both types were turnouts. ...
I would like to take an opportunity to thank everyone for their input on this question. I think the most pertinant responce was to use rectangular openings as ...
Kert, Actually, I found out after that fact that it appears rr.com had put in place some SPAM blocking software and was a bit too aggressive in the initial...
In a message dated 5/24/2004 8:58:46 AM Pacific Daylight Time, ... That is why people buy Cadrail as the principle RR CAD design tool !!!! Joe Brann Owner /...
Hi all, while I'm new to this group, I'm not new to Cadrail or model railroading (since 1947). I've been using Cadrail since the '90's, V.2 or 3. I recently...
Rick, I'm not sure what is going on since I have XP Prof. SP1 and version 7.11 of Cadrail. Although I never installed 7.00 I started with 7.01 and upgraded to...
On Jun 2, PeteC wrote: <I'm not sure what is going on since I have XP Prof. SP1 and version <7.11 of <Cadrail. Although I never installed 7.00 I started with...
... Rick, I upgraded to CadRail v8.02. Wonderful upgrade. I still haven't learned all the new tricks in the program, but it is a great upgrade from v7.11. I...
Hi, Jan: Can you provide a small drawing that illustrates the problem, or provide the procedure that you're using when you attempt to draw the points? Thanks, ...
Jan, I experimented a little bit with the points and got questionable results (at best). What I might suggest as an alternative: Use the line command to...
... I used "point on line" with a fixed distance along a line - the distance simply came out wrong. When using "distance/azimuth" or "distance/angle" the...
Hello Guys & Gals -- new to list -- cadrail since 95 ?I would like to take my drawings up to kinkos and use their 36 x 48 (E size) plotter to plot the drawings...
Bill, Sorry we do not have a Cadrail FAQ. You can check around the Sandia site: http://www.sandiasoftware.com/ or search this list's archives (though I don't...
Try the on-line tutorial. For printing specifically the url is http://www.sandiasoftware.com/tutor8/Chapter%206/6-printing.htm Bruce Wilson Barrie, Ontario...
Cadrail 8 has been an experience to say the least. Somehow, when I installed Cadrail 8 on my XP computer it over wrote all of my Cadrail 7 files, wiping out...
... OK, That problem is solved (more or less). The image I can't delete does not show in the printed version of the drawing, only on the screen. I drew over...
I was wondering if anyone can help me with this strange problem. After I upgraded to CR 8.02 from 7.11 one of my layout drawings has ended up with a line in it...
In a message dated 7/14/2004 7:26:45 PM Eastern Daylight Time, ... Pete, I have a little free time before I travel on Monday morning, so if you file is virus...
Pete, Here are a couple suggestions: 1. Try using Show All Objects in the 2d view. Sometimes the object is greatly removed from the other in the drawing in...
Robin, I tried all the suggestions you gave me and could not find anything out of place. When I went thru the worksheet view all items on the offending layer...
Pete, I am answering you here so all can joy from the experience. <g> You sent me the drawing and I have looked at it. It appears the culprit is related to the...
Sandia Software
tracks@...
Jul 19, 2004 4:34 pm
975
Hullo! I'm trying to print my drawing on adjacent sheets, to be able to use the prints to build track on. Even though I'm printing columns on CadRail, I seem...
Folks, I've used CADRail's scaling ability to create some accurately-scaled decal sets. A couple of months ago, I printed several sets of decal masters on my ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
