Hello, I am an amateur radio operator and I am after the Option A file for an 8528 radio, I believe it is for the amateur radio tuning option. Cheers, Deano....
Hello Codan Crew Success. That part of the circuit is the same as the 8525B which I found on ozradio.wireless.org.au. The answer is..... 4.7uF I will be...
I've been a "Ham" since the 60's, and have met my share of ham "characters", but nothing like this ! http://www.youtube.com/watch?v=oymXGzm21Jo Strangely, some...
Looks like a case of over-compensation (for something....mmmm?) Makes my humble old Codan 7727 and single frequency crystal on 40metres look SMALL by ...
Wayne, I do hope the 7727 isn't followed by a 400w amp to compensate for ...lack of...power :)) Cheers Jim ... From: WP To: codan_outback_radio@yahoogroups.com...
G’day All, Where does one get the adaptors that will enable a 27MHz S/s whip to screw onto a 9350? TIA Stu No virus found in this outgoing message. Checked...
I got an adaptor from Dick Smiths radio section - it was a 5/16" UNF male to 1/2" UNC female adaptor for fitting the std whip to the 1/2 bolt base, I then had...
Discussion of Codan HF RadioYep, I did likewise for the old 8558. just got two stainless bolts the right threads and welded them end to end, with the heads cut...
I just got a bolt that fitted the top of the spring, drilled a hole in the top of the bolt to take the whip bottom, and drilled and tapped a hole in the middle...
I'm trying to find a place to fit an Icom IC-7000 (with a Codan 9350) in my Hilux.... Problem is that I already have five existing radios installed, including...
Michael, I wasn't saying that they don't exist, merely that I hadn't seen one. And on that note, apart from redundancy, I can't see a need. Unless there is...
Hi Jim, The IC-7000 is a GREAT amateur radio, but you are not supposed to use in on commercial frequencies. On the other hand my IC-F7000 is a very decent...
Michael, yes, the F7000 will work well on amateur and commercial frequencies, but I've heard that the connectors aren't the best. Perhaps just a rumour. Codan...
... I remember at one point a long time ago, I used to have ONE radio in my vehicle. But then I realised I spent more time talking to the people on the other...
In my case, just that I was a dill. Dating my wife 30 years ago I had a 6m FM set that gave me an excuse to sit in secluded high spots. What I didn't realize...
Get a landcruiser! Seriously though, I assume that you would be remoting the 7000? If so, should be relatively easy - although I don't know where you have your...
Your talk about us loving all of the knobs had me thinking. I no longer have to dip the plate or peak the load, so that requirement went away. I only need a...
Chris, it's not that we need to fiddle with knobs, its just that we like to. I still miss an S meter on commercial gear :(( Cheers Jim ... From: Chris To:...
Years ago I was chatting to a very bright (his dad was a brain surgeon) avionics teko. He was building a "Deltahet" receiver (for those who remember :)) I...
The older I get, the more I seem to value the whole thing of learning something that I didn't know before. Now I'm long done with (too many) years of unrelated...
Hi, has any one made a rf amplifier using the 100 watt PA/RF unit from a 9323 or 8528 radio. A circuit and wiring connections would be appreciated. Thanks...
Jim, Talking about APRS in remote locations, I have discovered PSKMail a few months back and did some test which were very conclusive. It uses the PSK (with...
John, sounds good. What sort of data speed can one achieve ? Cheers Jim ... From: kanak_at_work To: codan_outback_radio@yahoogroups.com Sent: Thursday, October...
Jim, I have tested the psk125 so far and have just setup the new version with psk250. Without encryption we should get roughly a raw speed of 40 characters per...
John, yes for a quick and "easy" text syatem it sounds ok, but where's the Windoze version ? :)))))))) Cheers Jim -- I am using the free version of SPAMfighter...
Jim, lol...I had the same reaction to start with. In fact you have two options if like me you didn't want to start using Linux exclusively on you laptop: 1....
I'm not sure myself what all the Ham & Q talk on the Codan site has to do with codan outback radio. I appreciate it may be a bit quiet out there at the moment...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
