Phil, Both the NGT and the 9323 can have 'Amateur' mode, but it isn't fitted in the radio as standard. Its one of the options for which you need to get a...
Hi Ben, I have photocopied the 8555 (8550 series automatic tuning antenna sytem) handbook which has all information/diagrams and parts list. If you would email...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the codan_outback_radio group. File :...
codan_outback_radio@y...
Mar 3, 2004 6:59 am
2435
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the codan_outback_radio group. File : /XP...
codan_outback_radio@y...
Mar 3, 2004 7:04 am
2436
Hi all, I seem to have an intermittent TX fault at present on my 8525B, It has been slowly gettin worse ( over 6 months occasionally and the hot weather seems...
Hi Paul, Have you put a power meter on the lead between the transmitter and the antenna then pushed tune to see if it is transmitting 100 watts when the set is...
First thing that comes to mind is a faulty power connection.. You're geting enough current for Receive but not enough for TX or Tune.. I'd be sussing out the...
Paul, it is normal for the TX indicator to flicker during speech. The louder you talk, the brighter the light will be. I guess what you are saying is the light...
Thanks Malcom,. i had a quick look at the block diagram last night and it as it is only TX fault and RX Ok it is pretty much isolated down to the PA board or...
Paul, in case you're not aware, the earlier Khaki coloured board pin connectors (not sure of correct term here :) weren't the best. Later series had the much...
This is closer to what I originally thought six months ago, I have pulled the boards apart and cleaned them before but the problem prevailed over time, I may...
... off. In ... radio ... What a silly boy I am. There is a Codan TSB that covers this situation nicely. If anyone else has this problem I can (now) help. ...
Jim, Forgive my inadequacy, but what is a "Codan TSB" ??Technical Service Bulletin?? Could you explain the 'fix'? Glad you worked it out, though... Cheers, ...
Yes the TSB is a technical service bulletin. (Codan just call them a Service Bulliten ) Like most manufacturers Codan send them to their dealers to support the...
I think I might have asked a question quite a while ago if anybody had any info on Wagners - I was fitting a pic-based two-tone alarm to mine, and was after a...
Hi All, Yes I know, another quick question from me again,all help appreciated. I cleaned all the interconnecting pins/sockets on the RF boards again and the TX...
Paul, the resident expert on 8558's :))) is probably asleep in the Shakey Isles but no doubt he will be able to throw some light on it sooner or later. Did...
Hi Jim, No I havent but it appears to tune most of the time, and if one transistor was stuffed I would of thought a 4 pole stepper motor would only travel 270...
Gee Jim, thanks for that "MATE" Regards, Malcolm Langley On- Track 4WD GREYMOUTH www.on-track4wd.co.nz & New Zealand 4WD Radio Network 352 State Highway 7 ...
Hi Paul, Is this problem with the 8558 new or has it just started happening since you pulled the 8528 apart and put it back together again??? Regards, Malcolm...
Hi Malcom, No I seem to have solved the txcvr problem for now, it was interconnecting pins/sockets on the RF board. I picked up a 8558 last weekend and fitted...
Paul, I've seen this happen when the ad board drivers are on the way out. Give it a tune and put your finger CAREFULLY on each of those ad board driver...
paul the old 7mhz problem :)) perform the mod as per my page, it may solve the problem. this kind of fault is what it was designed for. unfortunately most...
Ben, does the 9350 suffer from similar problems ? Cheers Jim ... From: Ben Hobson To: codan_outback_radio@yahoogroups.com Sent: Monday, March 08, 2004 11:09 AM...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
