Just received my Signalink USB and have it hooked up to my Icom IC-735 via Tigertronics cable for the rig. The only other cables I have plugging into the...
On Thursday, November 10, 2011, Ronald L. Rosson Jr. <kf5jra@...> ... via Tigertronics cable for the rig. The only other cables I have plugging into...
... I think there is a little confusion I am talking about the meters and sliders that are in cocoamodem. As far as I can tell everything is working properly...
... As mentioned in cocoaModem's manual, the slider under the VU Meter only works when the sound card has an adjustable attenuation. The way you can double...
I'm new to ham radio and am having success generally but as I try more complicated things the waters get cloudy. I can make cocoaModem work fine on PSK31 using...
Sounds like your SLUSB is getting audio from the G4 sound card via one of the connections. ... -- Len Revelle N9IJ [Non-text portions of this message have been...
Every now and then it is worth repeating this about the SignaLink USB. The SignalLink USB consists of 1) a USB Sound Card 2) a set of input and output...
I decided to simplify things and first get the system working on one usb cable (without a logger program or SignaLink.) So far I have cocoaModem receiving fine...
Please look for one of my earlier posting here a few months ago regarding the TS-590s. With at least the firmware version on the rig I played with, the rig...
Jim W4SDJ, I am not cocoaModem user; however, I just tested it with my TS-590 using the direct USB interface to my iMac. CocoaModem keys the Kenwood TS-590S...
Good Morning: I am finally back on the air after a storm wiped out my antennas. I am running MLDX 5.35 (build 32), CocoaModem 2.0 ver 0.95, uH router ver 1.90,...
microHAM devices take the Left stereo Channel for output. The TS-590s is the only rig/interface that does not comply with standards. If it is a problem of not...
Hello all, I have an iMac and TS-590s. Last year I had cocoamodem working fine using only the USB cable for both control of the rig and audio. Over the...
The problem I am having is Mac related. I used the digikeyer via VM Fusion and digipan sucessfully, but no dice with cocoaModem. I am fresh out of what to do...
I have the left channel selected for output. There is NO tone from either the rig monitor or the cocoaModem monitor. The only time I get tones is if i use the...
... Doug, With the upgrade to Lion you probably need to make sure the proper driver is loaded for the USB to Serial device you are using. Once you have...
... Ditto on Ron's advice and the driver I use with my iMac and TS-590S can be found at http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx...
Hi all, Occasionally I am away from internet access or traveling, and it would be great if our group had another moderator or two to make sure that approval of...
Gang, I am please to announce that David M0XDF and Rich KE1B have volunteered to help moderate our group. Thanks to both! 73, Mike Michael McShan N5JKY 626 NE...
Mike I'd be happy to help out. I'm generally close to my computer and, except for one week in June , rarely without Internet access. R7potterjr on the group. ...
You might try installing the usb drivers. The link below I got from the Kenwood site. I know the documentation says you don't need to but why do they have the...
Those drivers are for a USB-Serial adapter and have nothing to do with USB Audio. I thought the TS-590S only had USB serial, and not USB Audio. but... For...
I assure you, I had this working at one point. I did download the suggested driver, but it makes no difference. Seems Jack is right on that one. I'm running...
The Silicon Labs driver is for the USB port and has nothing to do with the Serial port on the TS590S. The TS-590 does both audio and rig control via the USB...
I need to clarify some errors in my Nov 29, 201, 6:28 PM posting. First, I am using Mac OS X 10.7.2 (The Lion). The 10.7.3 was a typo on my part. The other is...
... The Silicon Labs driver is only used for the USB UART. The USB CODEC is supported by a different driver that is native to the operating system. All USB...
Joe et al, Thanks for the suggestions. I did have the radio on, configured for usb audio and cabled in before bringing up the iMac. Still, the Mac dosen't...
Try rebooting the Mac again, before going to the trouble of reloading the firmware. Use System Profiler to look for the USB codec 73 de M0XDF No one is useless...
