Thought I would try to get something going on the list.  Joe Cox gave
his journal on the forum page.  Great job.  If and WHEN you go out, come
back with your journal and log it to the onelist group so we can all
enjoy the adventures of fellow (male and female) Clipper Owners.
Just a thought.
I hope to get out tomorrow.  If I do, I'll post my impressions and
thoughts of the day.
Hope you do to.  Thanks agian Joe
Blow wind, blow
Larry

Hey larry,

Do you have a drawing of what the keel cable is supposed to look like and
how it is attached to the swing keel on the CM-23

Bill

----------
> From: Larry Rust <ldrust@...>
> To: CMOA <cmoa@onelist.com>
> Subject: [cmoa] (no subject)
> Date: Monday, August 30, 1999 3:34 PM
>
> From: Larry Rust <ldrust@...>
>
> Just wanted to communicate about the forum.  I cleaned up some.  Hope
> your comments or questions are still there.  If not just go for it
> again.
> Thanks for understanding.  FALL cleaning.
> Thanks,
> Larry
>
>
> --------------------------- ONElist Sponsor ----------------------------
>
> ATTN ONELIST USERS: stay current on the latest activities,
> programs, & features at ONElist by joining our member newsletter at
> <a href=" http://www.onelist.com/subscribe/onelist_announce ">Click</a>
>
> ------------------------------------------------------------------------
> Thanks for your input.
> Any questions, please feel free to contact ldrust@...

Just wanted to communicate about the forum.  I cleaned up some.  Hope
your comments or questions are still there.  If not just go for it
again.
Thanks for understanding.  FALL cleaning.
Thanks,
Larry

Guys,

You are all apparently members of the clipper marine
owners association list server like I am.  Your
messages are going to hundreds of people who have
joined this list.  Larry is in charge of the clipper
marine owner association web site.

Hope this clears it up,
Dave

--- Richard and Laurie <greatbasin@...> wrote:
> From: Richard and Laurie <greatbasin@...>
>
> Must be an addressing error, we are
> greatbasin@...
>
> sunbeam2@... wrote:
>
> > From: sunbeam2@...
> >
> > I thought I was responding to Larry Rust, have no
> clue how you got it
> > sorry..
> > we were discussing sailboat repairs
> > Bill
> >
> > ----------
> > > From: Richard and Laurie
> <greatbasin@...>
> > > To: cmoa@onelist.com
> > > Subject: Re: [cmoa] (no subject)
> > > Date: Tuesday, July 27, 1999 3:36 PM
> > >
> > > From: Richard and Laurie
> <greatbasin@...>
> > >
> > > Hello, did you mean to send this to me?
> > > Richard Waller
> > >
> > > sunbeam2@... wrote:
> > >
> > > > From: sunbeam2@...
> > > >
> > > > Hi Larry,
> > > > Well the keel is out, is was a mess, has a
> hole rusted through in the
> > area
> > > > you cannot see unless it was down, that will
> get a piece welded and
> > ground
> > > > to fit.
> > > > They have grinded the rest of it fairly smooth
> and are covering the
> > whole
> > > > thing with epoxy and then will sand it smooth,
>  the pivot hole is
> > elongated
> > > > and that are going to rebush that.
> > > > The pivot bolt was bent real bad and the keel
> housing has some movement
> > > > near the pivot bolt hole that must be
> repaired.
> > > > The cable itself was routed through the cable
> hole, only a piece of a
> > > > thimble was left,  The three little cable ties
> were so rusted that it
> > was
> > > > amazing the keel did not just freefall down a
> long time ago, The winch
> > was
> > > > also rusted out pretty bad, everything will be
> replaced with new
> > stainless
> > > > and it will be good to go in about a week.
> > > > I just bought a used Garmin GPS "48" for 90
> bucks with a swivel mount.
> > > > West Marine is selling them now for 219.00 and
> another 25.00 for the
> > mount.
> > > > Keep in touch
> > > > Bill
> > > > Having trouble getting the scanner to save  so
> when I get it going will
> > > > send you some photos
> > > > ---------
> > > > > From: Larry Rust <ldrust@...>
> > > > > To: CMOA <cmoa@onelist.com>
> > > > > Subject: [cmoa] (no subject)
> > > > > Date: Wednesday, July 21, 1999 6:50 PM
> > > > >
> > > > > From: Larry Rust <ldrust@...>
> > > > >
> > > > > New pics on cm21 and cm26 page
> > > > > Larry
> > > > >
> > > > >
> > > > > --------------------------- ONElist Sponsor
> > ----------------------------
> > > > >
> > > > > Congratulations SAYNO2DRUGS. Our latest
> ONElist of the week.
> > > > > http://www.onelist.com
> > > > > How is ONElist changing YOUR life? Visit our
> homepage and let us
> > know!
> > > > >
> > > > >
> >
>
------------------------------------------------------------------------
> > > > > Thanks for your input.
> > > > > Any questions, please feel free to contact
> ldrust@...
> > > >
> > > > --------------------------- ONElist Sponsor
> > ----------------------------
> > > >
> > > > Create a list for FRIENDS & FAMILY...
> > > > ...and YOU can WIN $100 to Amazon.com.  For
> details, go to
> > > >
> http://www.onelist.com/info/onereachsplash3.html
> > > >
> > > >
> >
>
------------------------------------------------------------------------
> > > > Thanks for your input.
> > > > Any questions, please feel free to contact
> ldrust@...
> > >
> > >
> > > --------------------------- ONElist Sponsor
> ----------------------------
> > >
> > > Congratulations DALMATIANRESCUE. Our latest
> ONElist of the week.
> > > To see full story and submit YOUR ONElist story,
> go to
> > > http://www.onelist.com/info/ootw_19.html
> > >
> > >
>
------------------------------------------------------------------------
> > > Thanks for your input.
> > > Any questions, please feel free to contact
> ldrust@...
> >
> > --------------------------- ONElist Sponsor
> ----------------------------
> >
> > You can WIN $100 to Amazon.com!
> > If you join ONElist’s FRIENDS & FAMILY program.
> For details, go to
> > http://www.onelist.com/info/onereachsplash3.html
> >
> >
>
------------------------------------------------------------------------
> > Thanks for your input.
> > Any questions, please feel free to contact
> ldrust@...
>
>
> --------------------------- ONElist Sponsor
> ----------------------------
>
> Books, music, auctions, and more. Amazon.com!
> <a href=" http://clickme.onelist.com/ad/Amazon6
> ">Click Here</a>
>
>
------------------------------------------------------------------------
> Thanks for your input.
> Any questions, please feel free to contact
> ldrust@...
>

===

Dave Bell
Project Manager
Geo InSight International
dbell@...

_____________________________________________________________
Do You Yahoo!?
Free instant messaging and more at http://messenger.yahoo.com

Guys,

You are all apparently members of the clipper marine
owners association list server like I am.  Your
messages are going to hundreds of people who have
joined this list.  Larry is in charge of the clipper
marine owner association web site.

Hope this clears it up,
Dave

--- Richard and Laurie <greatbasin@...> wrote:
> From: Richard and Laurie <greatbasin@...>
>
> Must be an addressing error, we are
> greatbasin@...
>
> sunbeam2@... wrote:
>
> > From: sunbeam2@...
> >
> > I thought I was responding to Larry Rust, have no
> clue how you got it
> > sorry..
> > we were discussing sailboat repairs
> > Bill
> >
> > ----------
> > > From: Richard and Laurie
> <greatbasin@...>
> > > To: cmoa@onelist.com
> > > Subject: Re: [cmoa] (no subject)
> > > Date: Tuesday, July 27, 1999 3:36 PM
> > >
> > > From: Richard and Laurie
> <greatbasin@...>
> > >
> > > Hello, did you mean to send this to me?
> > > Richard Waller
> > >
> > > sunbeam2@... wrote:
> > >
> > > > From: sunbeam2@...
> > > >
> > > > Hi Larry,
> > > > Well the keel is out, is was a mess, has a
> hole rusted through in the
> > area
> > > > you cannot see unless it was down, that will
> get a piece welded and
> > ground
> > > > to fit.
> > > > They have grinded the rest of it fairly smooth
> and are covering the
> > whole
> > > > thing with epoxy and then will sand it smooth,
>  the pivot hole is
> > elongated
> > > > and that are going to rebush that.
> > > > The pivot bolt was bent real bad and the keel
> housing has some movement
> > > > near the pivot bolt hole that must be
> repaired.
> > > > The cable itself was routed through the cable
> hole, only a piece of a
> > > > thimble was left,  The three little cable ties
> were so rusted that it
> > was
> > > > amazing the keel did not just freefall down a
> long time ago, The winch
> > was
> > > > also rusted out pretty bad, everything will be
> replaced with new
> > stainless
> > > > and it will be good to go in about a week.
> > > > I just bought a used Garmin GPS "48" for 90
> bucks with a swivel mount.
> > > > West Marine is selling them now for 219.00 and
> another 25.00 for the
> > mount.
> > > > Keep in touch
> > > > Bill
> > > > Having trouble getting the scanner to save  so
> when I get it going will
> > > > send you some photos
> > > > ---------
> > > > > From: Larry Rust <ldrust@...>
> > > > > To: CMOA <cmoa@onelist.com>
> > > > > Subject: [cmoa] (no subject)
> > > > > Date: Wednesday, July 21, 1999 6:50 PM
> > > > >
> > > > > From: Larry Rust <ldrust@...>
> > > > >
> > > > > New pics on cm21 and cm26 page
> > > > > Larry
> > > > >
> > > > >
> > > > > --------------------------- ONElist Sponsor
> > ----------------------------
> > > > >
> > > > > Congratulations SAYNO2DRUGS. Our latest
> ONElist of the week.
> > > > > http://www.onelist.com
> > > > > How is ONElist changing YOUR life? Visit our
> homepage and let us
> > know!
> > > > >
> > > > >
> >
>
------------------------------------------------------------------------
> > > > > Thanks for your input.
> > > > > Any questions, please feel free to contact
> ldrust@...
> > > >
> > > > --------------------------- ONElist Sponsor
> > ----------------------------
> > > >
> > > > Create a list for FRIENDS & FAMILY...
> > > > ...and YOU can WIN $100 to Amazon.com.  For
> details, go to
> > > >
> http://www.onelist.com/info/onereachsplash3.html
> > > >
> > > >
> >
>
------------------------------------------------------------------------
> > > > Thanks for your input.
> > > > Any questions, please feel free to contact
> ldrust@...
> > >
> > >
> > > --------------------------- ONElist Sponsor
> ----------------------------
> > >
> > > Congratulations DALMATIANRESCUE. Our latest
> ONElist of the week.
> > > To see full story and submit YOUR ONElist story,
> go to
> > > http://www.onelist.com/info/ootw_19.html
> > >
> > >
>
------------------------------------------------------------------------
> > > Thanks for your input.
> > > Any questions, please feel free to contact
> ldrust@...
> >
> > --------------------------- ONElist Sponsor
> ----------------------------
> >
> > You can WIN $100 to Amazon.com!
> > If you join ONElist’s FRIENDS & FAMILY program.
> For details, go to
> > http://www.onelist.com/info/onereachsplash3.html
> >
> >
>
------------------------------------------------------------------------
> > Thanks for your input.
> > Any questions, please feel free to contact
> ldrust@...
>
>
> --------------------------- ONElist Sponsor
> ----------------------------
>
> Books, music, auctions, and more. Amazon.com!
> <a href=" http://clickme.onelist.com/ad/Amazon6
> ">Click Here</a>
>
>
------------------------------------------------------------------------
> Thanks for your input.
> Any questions, please feel free to contact
> ldrust@...
>

===

Dave Bell
Project Manager
Geo InSight International
dbell@...

_____________________________________________________________
Do You Yahoo!?
Free instant messaging and more at http://messenger.yahoo.com

Must be an addressing error, we are greatbasin@...

sunbeam2@... wrote:

> From: sunbeam2@...
>
> I thought I was responding to Larry Rust, have no clue how you got it
> sorry..
> we were discussing sailboat repairs
> Bill
>
> ----------
> > From: Richard and Laurie <greatbasin@...>
> > To: cmoa@onelist.com
> > Subject: Re: [cmoa] (no subject)
> > Date: Tuesday, July 27, 1999 3:36 PM
> >
> > From: Richard and Laurie <greatbasin@...>
> >
> > Hello, did you mean to send this to me?
> > Richard Waller
> >
> > sunbeam2@... wrote:
> >
> > > From: sunbeam2@...
> > >
> > > Hi Larry,
> > > Well the keel is out, is was a mess, has a hole rusted through in the
> area
> > > you cannot see unless it was down, that will get a piece welded and
> ground
> > > to fit.
> > > They have grinded the rest of it fairly smooth and are covering the
> whole
> > > thing with epoxy and then will sand it smooth,  the pivot hole is
> elongated
> > > and that are going to rebush that.
> > > The pivot bolt was bent real bad and the keel housing has some movement
> > > near the pivot bolt hole that must be repaired.
> > > The cable itself was routed through the cable hole, only a piece of a
> > > thimble was left,  The three little cable ties were so rusted that it
> was
> > > amazing the keel did not just freefall down a long time ago, The winch
> was
> > > also rusted out pretty bad, everything will be replaced with new
> stainless
> > > and it will be good to go in about a week.
> > > I just bought a used Garmin GPS "48" for 90 bucks with a swivel mount.
> > > West Marine is selling them now for 219.00 and another 25.00 for the
> mount.
> > > Keep in touch
> > > Bill
> > > Having trouble getting the scanner to save  so when I get it going will
> > > send you some photos
> > > ---------
> > > > From: Larry Rust <ldrust@...>
> > > > To: CMOA <cmoa@onelist.com>
> > > > Subject: [cmoa] (no subject)
> > > > Date: Wednesday, July 21, 1999 6:50 PM
> > > >
> > > > From: Larry Rust <ldrust@...>
> > > >
> > > > New pics on cm21 and cm26 page
> > > > Larry
> > > >
> > > >
> > > > --------------------------- ONElist Sponsor
> ----------------------------
> > > >
> > > > Congratulations SAYNO2DRUGS. Our latest ONElist of the week.
> > > > http://www.onelist.com
> > > > How is ONElist changing YOUR life? Visit our homepage and let us
> know!
> > > >
> > > >
> ------------------------------------------------------------------------
> > > > Thanks for your input.
> > > > Any questions, please feel free to contact ldrust@...
> > >
> > > --------------------------- ONElist Sponsor
> ----------------------------
> > >
> > > Create a list for FRIENDS & FAMILY...
> > > ...and YOU can WIN $100 to Amazon.com.  For details, go to
> > > http://www.onelist.com/info/onereachsplash3.html
> > >
> > >
> ------------------------------------------------------------------------
> > > Thanks for your input.
> > > Any questions, please feel free to contact ldrust@...
> >
> >
> > --------------------------- ONElist Sponsor ----------------------------
> >
> > Congratulations DALMATIANRESCUE. Our latest ONElist of the week.
> > To see full story and submit YOUR ONElist story, go to
> > http://www.onelist.com/info/ootw_19.html
> >
> > ------------------------------------------------------------------------
> > Thanks for your input.
> > Any questions, please feel free to contact ldrust@...
>
> --------------------------- ONElist Sponsor ----------------------------
>
> You can WIN $100 to Amazon.com!
> If you join ONElist’s FRIENDS & FAMILY program.  For details, go to
> http://www.onelist.com/info/onereachsplash3.html
>
> ------------------------------------------------------------------------
> Thanks for your input.
> Any questions, please feel free to contact ldrust@...

I will try it again, I am not Larry, so.....

Richard and Laurie wrote:

> From: Richard and Laurie <greatbasin@...>
>
> Hello, did you mean to send this to me?
> Richard Waller
>
> sunbeam2@... wrote:
>
> > From: sunbeam2@...
> >
> > Hi Larry,
> > Well the keel is out, is was a mess, has a hole rusted through in the area
> > you cannot see unless it was down, that will get a piece welded and ground
> > to fit.
> > They have grinded the rest of it fairly smooth and are covering the whole
> > thing with epoxy and then will sand it smooth,  the pivot hole is elongated
> > and that are going to rebush that.
> > The pivot bolt was bent real bad and the keel housing has some movement
> > near the pivot bolt hole that must be repaired.
> > The cable itself was routed through the cable hole, only a piece of a
> > thimble was left,  The three little cable ties were so rusted that it was
> > amazing the keel did not just freefall down a long time ago, The winch was
> > also rusted out pretty bad, everything will be replaced with new stainless
> > and it will be good to go in about a week.
> > I just bought a used Garmin GPS "48" for 90 bucks with a swivel mount.
> > West Marine is selling them now for 219.00 and another 25.00 for the mount.
> > Keep in touch
> > Bill
> > Having trouble getting the scanner to save  so when I get it going will
> > send you some photos
> > ---------
> > > From: Larry Rust <ldrust@...>
> > > To: CMOA <cmoa@onelist.com>
> > > Subject: [cmoa] (no subject)
> > > Date: Wednesday, July 21, 1999 6:50 PM
> > >
> > > From: Larry Rust <ldrust@...>
> > >
> > > New pics on cm21 and cm26 page
> > > Larry
> > >
> > >
> > > --------------------------- ONElist Sponsor ----------------------------
> > >
> > > Congratulations SAYNO2DRUGS. Our latest ONElist of the week.
> > > http://www.onelist.com
> > > How is ONElist changing YOUR life? Visit our homepage and let us know!
> > >
> > > ------------------------------------------------------------------------
> > > Thanks for your input.
> > > Any questions, please feel free to contact ldrust@...
> >
> > --------------------------- ONElist Sponsor ----------------------------
> >
> > Create a list for FRIENDS & FAMILY...
> > ...and YOU can WIN $100 to Amazon.com.  For details, go to
> > http://www.onelist.com/info/onereachsplash3.html
> >
> > ------------------------------------------------------------------------
> > Thanks for your input.
> > Any questions, please feel free to contact ldrust@...
>
> --------------------------- ONElist Sponsor ----------------------------
>
> Congratulations DALMATIANRESCUE. Our latest ONElist of the week.
> To see full story and submit YOUR ONElist story, go to
> http://www.onelist.com/info/ootw_19.html
>
> ------------------------------------------------------------------------
> Thanks for your input.
> Any questions, please feel free to contact ldrust@...

I thought I was responding to Larry Rust, have no clue how you got it
sorry..
we were discussing sailboat repairs
Bill

----------
> From: Richard and Laurie <greatbasin@...>
> To: cmoa@onelist.com
> Subject: Re: [cmoa] (no subject)
> Date: Tuesday, July 27, 1999 3:36 PM
>
> From: Richard and Laurie <greatbasin@...>
>
> Hello, did you mean to send this to me?
> Richard Waller
>
> sunbeam2@... wrote:
>
> > From: sunbeam2@...
> >
> > Hi Larry,
> > Well the keel is out, is was a mess, has a hole rusted through in the
area
> > you cannot see unless it was down, that will get a piece welded and
ground
> > to fit.
> > They have grinded the rest of it fairly smooth and are covering the
whole
> > thing with epoxy and then will sand it smooth,  the pivot hole is
elongated
> > and that are going to rebush that.
> > The pivot bolt was bent real bad and the keel housing has some movement
> > near the pivot bolt hole that must be repaired.
> > The cable itself was routed through the cable hole, only a piece of a
> > thimble was left,  The three little cable ties were so rusted that it
was
> > amazing the keel did not just freefall down a long time ago, The winch
was
> > also rusted out pretty bad, everything will be replaced with new
stainless
> > and it will be good to go in about a week.
> > I just bought a used Garmin GPS "48" for 90 bucks with a swivel mount.
> > West Marine is selling them now for 219.00 and another 25.00 for the
mount.
> > Keep in touch
> > Bill
> > Having trouble getting the scanner to save  so when I get it going will
> > send you some photos
> > ---------
> > > From: Larry Rust <ldrust@...>
> > > To: CMOA <cmoa@onelist.com>
> > > Subject: [cmoa] (no subject)
> > > Date: Wednesday, July 21, 1999 6:50 PM
> > >
> > > From: Larry Rust <ldrust@...>
> > >
> > > New pics on cm21 and cm26 page
> > > Larry
> > >
> > >
> > > --------------------------- ONElist Sponsor
----------------------------
> > >
> > > Congratulations SAYNO2DRUGS. Our latest ONElist of the week.
> > > http://www.onelist.com
> > > How is ONElist changing YOUR life? Visit our homepage and let us
know!
> > >
> > >
------------------------------------------------------------------------
> > > Thanks for your input.
> > > Any questions, please feel free to contact ldrust@...
> >
> > --------------------------- ONElist Sponsor
----------------------------
> >
> > Create a list for FRIENDS & FAMILY...
> > ...and YOU can WIN $100 to Amazon.com.  For details, go to
> > http://www.onelist.com/info/onereachsplash3.html
> >
> >
------------------------------------------------------------------------
> > Thanks for your input.
> > Any questions, please feel free to contact ldrust@...
>
>
> --------------------------- ONElist Sponsor ----------------------------
>
> Congratulations DALMATIANRESCUE. Our latest ONElist of the week.
> To see full story and submit YOUR ONElist story, go to
> http://www.onelist.com/info/ootw_19.html
>
> ------------------------------------------------------------------------
> Thanks for your input.
> Any questions, please feel free to contact ldrust@...

Hello, did you mean to send this to me?
Richard Waller

sunbeam2@... wrote:

> From: sunbeam2@...
>
> Hi Larry,
> Well the keel is out, is was a mess, has a hole rusted through in the area
> you cannot see unless it was down, that will get a piece welded and ground
> to fit.
> They have grinded the rest of it fairly smooth and are covering the whole
> thing with epoxy and then will sand it smooth,  the pivot hole is elongated
> and that are going to rebush that.
> The pivot bolt was bent real bad and the keel housing has some movement
> near the pivot bolt hole that must be repaired.
> The cable itself was routed through the cable hole, only a piece of a
> thimble was left,  The three little cable ties were so rusted that it was
> amazing the keel did not just freefall down a long time ago, The winch was
> also rusted out pretty bad, everything will be replaced with new stainless
> and it will be good to go in about a week.
> I just bought a used Garmin GPS "48" for 90 bucks with a swivel mount.
> West Marine is selling them now for 219.00 and another 25.00 for the mount.
> Keep in touch
> Bill
> Having trouble getting the scanner to save  so when I get it going will
> send you some photos
> ---------
> > From: Larry Rust <ldrust@...>
> > To: CMOA <cmoa@onelist.com>
> > Subject: [cmoa] (no subject)
> > Date: Wednesday, July 21, 1999 6:50 PM
> >
> > From: Larry Rust <ldrust@...>
> >
> > New pics on cm21 and cm26 page
> > Larry
> >
> >
> > --------------------------- ONElist Sponsor ----------------------------
> >
> > Congratulations SAYNO2DRUGS. Our latest ONElist of the week.
> > http://www.onelist.com
> > How is ONElist changing YOUR life? Visit our homepage and let us know!
> >
> > ------------------------------------------------------------------------
> > Thanks for your input.
> > Any questions, please feel free to contact ldrust@...
>
> --------------------------- ONElist Sponsor ----------------------------
>
> Create a list for FRIENDS & FAMILY...
> ...and YOU can WIN $100 to Amazon.com.  For details, go to
> http://www.onelist.com/info/onereachsplash3.html
>
> ------------------------------------------------------------------------
> Thanks for your input.
> Any questions, please feel free to contact ldrust@...

Hi Larry,
Well the keel is out, is was a mess, has a hole rusted through in the area
you cannot see unless it was down, that will get a piece welded and ground
to fit.
They have grinded the rest of it fairly smooth and are covering the whole
thing with epoxy and then will sand it smooth,  the pivot hole is elongated
and that are going to rebush that.
The pivot bolt was bent real bad and the keel housing has some movement
near the pivot bolt hole that must be repaired.
The cable itself was routed through the cable hole, only a piece of a
thimble was left,  The three little cable ties were so rusted that it was
amazing the keel did not just freefall down a long time ago, The winch was
also rusted out pretty bad, everything will be replaced with new stainless
and it will be good to go in about a week.
I just bought a used Garmin GPS "48" for 90 bucks with a swivel mount.
West Marine is selling them now for 219.00 and another 25.00 for the mount.
Keep in touch
Bill
Having trouble getting the scanner to save  so when I get it going will
send you some photos
---------
> From: Larry Rust <ldrust@...>
> To: CMOA <cmoa@onelist.com>
> Subject: [cmoa] (no subject)
> Date: Wednesday, July 21, 1999 6:50 PM
>
> From: Larry Rust <ldrust@...>
>
> New pics on cm21 and cm26 page
> Larry
>
>
> --------------------------- ONElist Sponsor ----------------------------
>
> Congratulations SAYNO2DRUGS. Our latest ONElist of the week.
> http://www.onelist.com
> How is ONElist changing YOUR life? Visit our homepage and let us know!
>
> ------------------------------------------------------------------------
> Thanks for your input.
> Any questions, please feel free to contact ldrust@...

New pics on cm21 and cm26 page
Larry

I don't know about the algae, but.....
There was a thread regarding wax on a hull on the Trailer Sailor messageboard
a week or two ago.  Seems that wax was bad, but a good wet sanding down to
800 grit was good.  Something to do with bubbles sticking to the wax. Don't
know if it is wort 3 knots or 0.3 knots.
<A HREF="http://www.cruisecortez.com/webbbs/trailersailor/index.cgi">Trailer
Sailor Message Board - Message Index
</A>
Have a look
K

Anyone with a good solution to getting dried alge of the bottom of my
boat and once it is off what would need to be done before putting into
the water.  Wax or not or ??
Thanks for the help of a newbee.
Larry

Its pretty much a judgement call I guess.  If I am singlehanding I
definitely wear my PFD (auto-inflatable harness type) at all times.  I
rarely clip in unless the weather is quite bad.  When singlehanding you
should also drag a line to help you back aboard, but again I often
neglect to.

I do carry a whistle and strobe on my PFD.
Get Your Private, Free Email at http://www.hotmail.com

I found the comments on the forum in regards to PFD's interesting. This
will be my first year to sail alone so I thought I would ask what is
your view point and procedure to sailing solo, and the use/non-use of
PFD's while you sail. Also where and how do you secure yourself on your
boat.  Thanks for taking the time.
Larry

OOOPS!  Big FAT TYPO, (I Have enjoyed the news)
_______________________________________________


At 05:12 PM 3/28/99 EST, you wrote:
>From: ClipperM30@...
>
>cm 32   i own a cm30 in texas do you have a full manual for the 30  i only
>have pieces of it and would love to have a full one.  there is anouther
cm 30
>on lake texhoma but dont know who owns it , that make two of us on the same
>lake thats a little strange i think for around here.    Rick Rheinlaender
>ClipperM30
>
>------------------------------------------------------------------------
>Did you know that we have over 85,000 e-mail communities at Onelist?
>http://www.onelist.com
>Come visit our new web site and explore a new interest
>------------------------------------------------------------------------
>Thanks for your input.
>Any questions, please feel free to contact ldrust@...
>
>
Linda S Terry
University of Kentucky
Hazardous Materials Management
Environmental Quality Management Center
350 Cooper Dr.
Lexington Kentucky 40546-0490

606 323-6280

Hay!Hay! I have just signed on to the "cmoa". I haven't enjoyed all news.
I own a CM30, I need all the info I can get on this wonderful boat.  I hope
to soon have some pictures for the cmoa site.

When we found her she did not have a rudder.  Would look the specs.   We
have designed one works good.

The weather here in Kentucky is coming about.  high 60s to low 70s this
week.  We be sailing this "She and I" Friday.
------------------------------------------------------
At 05:12 PM 3/28/99 EST, you wrote:
>From: ClipperM30@...
>
>cm 32   i own a cm30 in texas do you have a full manual for the 30  i only
>have pieces of it and would love to have a full one.  there is another  cm 30
>on lake texhoma but dont know who owns it , that make two of us on the same
>lake thats a little strange i think for around here.    Rick Rheinlaender
>ClipperM30
>
>------------------------------------------------------------------------
>Did you know that we have over 85,000 e-mail communities at Onelist?
>http://www.onelist.com
>Come visit our new web site and explore a new interest
>------------------------------------------------------------------------
>Thanks for your input.
>Any questions, please feel free to contact ldrust@...
>
>
Linda S Terry
University of Kentucky
Hazardous Materials Management
Environmental Quality Management Center
350 Cooper Dr.
Lexington Kentucky 40546-0490

606 323-6280

cm 32   i own a cm30 in texas do you have a full manual for the 30  i only
have pieces of it and would love to have a full one.  there is anouther  cm 30
on lake texhoma but dont know who owns it , that make two of us on the same
lake thats a little strange i think for around here.    Rick Rheinlaender
ClipperM30

hi didnt go sailing this weekend  and will be out of town next but have the
texhoma Lake Fest Regatta  on the 8 thru 10th of april  my wife and i are
looking forward to that.  I recently installed a 150% genoa on a roller furler
and it makes all the difference in the world on how she sails, hope to get a
new main this year .     Rick Rheinlaender

Hi all,
Just took off the tarp, bailed some water and started the outboard.
Taking her out will have to wait a bit. I have a bit of work to do
on the boat and the trailer. Paint the hull, replace the keel cable,
tear out the v-bearth and replace the foam and a few other
things. I hope it doesn't take too long! ; }
Later,
Buddy

cmoa@onelist.com wrote:

> New hobbies? New curiosities? New enthusiasms?
> http://www.onelist.com
> Sign up for a new email list today
> ------------------------------------------------------------------------
> Thanks for your input.
> Any questions, please feel free to contact ldrust@...
>
> There is 1 message in this issue.
>
>  Topics in today's digest:
>
>       1. I'll bite
>            From: Larry Rust <ldrust@...>
>
>
_______________________________________________________________________________
>
_______________________________________________________________________________
>
> Message: 1
>    Date: Fri, 26 Mar 1999 20:21:11 -0800
>    From: Larry Rust <ldrust@...>
> Subject: I'll bite
>
> Way to get things going.
>
> You may want to check out the club I belong to:
> http://members.tripod.com/~elsa55/index.html
> It is still pretty cold here.  On the first sat. in May we are suppost
> to put out the moorings. Then ASAP to get on the water.
>
> anyone have any demensions for a storm jib for a 26.
>
> anyone going to sailexpo in Oakland?
>
> I'm gone,
> Larry
>
>
_______________________________________________________________________________
>
_______________________________________________________________________________

I'll bit too.

Did go sailing Sat.  Not on the CM though.  It was on a Schock 35, a 30
mile race winds to 35 knots or so.    Most of the time it was at 12 to 15
knots of wind with gusts to 25 or so.  We hit 11+ knots once and were doing
a steady 8-9 on the way back.  That was without the chute.  It was quit a
ride and a lot of fun.  At the end I was pretty exhausted so I went home to
my good ol CM32 took the dog for a quick walk and then took a long nap.

We'll have to give Alex a hard time as he is giving up his Clipper 26 for a
Valiant 42, can you believe that.

Does anyone need a copy of a manual.  A few years ago I mad several copies
for some folks, all with Clipper 26's and I still have one copy left.  I've
never met of anyone else with a CM32, Though I've seen several here in the
Seattle area.  There is a CM30 for sale at the time.

Well I think I am rambling so everyone have a great day.
Andy
CM32 Eowyn

Way to get things going.

You may want to check out the club I belong to:
http://members.tripod.com/~elsa55/index.html
It is still pretty cold here.  On the first sat. in May we are suppost
to put out the moorings. Then ASAP to get on the water.

anyone have any demensions for a storm jib for a 26.

anyone going to sailexpo in Oakland?

I'm gone,
Larry

Hi folks,
<whistling, blowing on microphone> Is this thing on?
Haven't seen much messaging going on, thought I would see if it was working.
Anybody going sailing this weekend?
Still got snow in that earlobepit?
Helooooooo
OK I am forced to threaten. If I don't start seeing some messages soon, I am
going to have to post a long and boring essay describing how exactly I
replaced the springs on my trailer.....
Anyone, anyone........ Bueller........
Happy heeling
K

New "Sailing for Everyone" web ring on main page:
http://www.angelfire.com/ca/ldrust/cmoa.html

Larry
ldrust@...

Again thanks to all for helping to get CMOA up and out.

I will communicate from time to time with you about doing what can be
done to get the word out  about the CMOA.  Again, if you have a URL or
some pictures please feel free to forward them to me.  I also will use
this to inform you of new items put on the page.
Check out:  Clipper  Marine 21 and 23 for some new items.
I will be going to the Sail Expo in Oakland:
http://www.sailnet.com/sailamer/sailexpo/pacific/
If any one in CA will be there on Friday, let me know, It would be great
to meet you.

Thanks,
LDR
ldrust@...

I have been trying to find a forum that will fill our needs, so let's
give this a try.
I will start.
http://wwwboard.net/bbs1/ldrust/wwwboard.sht

See Ya,
LDR
ldrust@...

Larry,

What you have so far is really great.  Thanks for taking the time to put
it together.  Might I suggest that the "clubs" concept (such as the one
at http://clubs.yahoo.com) is probably ideal for this as long as all the
participants are "trusted."  One way to do this would be to use cmoa as
you have set it up as a gateway to the club.

In fact (1127 tick tick tick 1135) I just set one up as a private club.
I will send invites to anyone who wants one - please send your email
directly to me at alex_weinert@... and I'll send you an invite
to join.

Club has built in discussion list, chat, photo album, news, calendar,
etc. specific to our club.

Thanks,
Alex
Get Your Private, Free Email at http://www.hotmail.com

Hi there!
I am Keith, the twice so-far and future sailor of a Clipper 21 called Sunset
Rose. I live near Pasadena Calif. and bought my Clipper last summer.
I obtained her out of a backyard close to home and have been attempting to get
myself together on all the projects the poor little thing needs. As many of
you know when the inside gets wet, here comes trouble. I haven't been out
except for to a small lake in San Dimas, where there was juuust enough wind to
tease.
As of late, I have ben trying to get the trailer to the poing where I feel
comfy pulling it farther than a couple of miles.
Glad to have contact with other Clipper sailors out there.
Thanks Larry.....
Keith

Greetings,
Well, Here goes.  This is a first time for me.  I am reallllllllly new
at this.  I do appreciate you being involved.  I live in Susanville, Ca.
and sail on Eagle Lake, http://members.tripod.com/~elsa55/index.html.
Last year was my first year with my Clipper and I am learning much.
I will try to get your info on the page somewhere and I am working on
locating a "forum" concept for on going dialog.  Thanks again.  This
should be some fun.
If you have any pictures or web pages that relate to the CM please feel
free to send them.  Also, If you have some pictures but no scanner, I
hope you would feel comfortable enough the send them to me and I will
scan them and get them right back to you.  E-mail me if you have any
questions.
Catch ya later,
LDR
ldrust@...

Hello fellow Clipper owners.  Thought I'd kick things off -

My name is Alex Weinert.  My wife Heather and I have a Clipper MK26
"Agape" out at Shilshole Marina in Seattle.  Agape is a traditional
cabin (e.g. she has some microscopic side-decks) built in 1975.  She has
a pop-top and a dinette layout inside.

I've done a ton of work on her, though most of it has been structural to
date.  I've redone her rudder twice, put on new gudgeons, replaced the
mast, built a new tabernacle & compression post, built a chart table,
rebedded the port window, am in the process of replacing the shelf on
the port side with proper cabinetry, etc.  I am quite interested to hear
of other 26 owners' problems and modifications.

I sold the trailer when I first got the boat, so I have been keeping her
in the water.  I fear I may find some blistering on the next haulout . .
.

Thanks to Larry for getting the list together!

Fair winds,
Alex Weinert
Get Your Private, Free Email at http://www.hotmail.com