We bought a crawler that looks very much like the GT-30 at www.museum.ronfoo.com/terra.html. The number plate off the left of the seat compartment is gone....
Hi Bob and welcome, Other members have said the ID should be on the frame, left side, top (as you sit in the seat) about even with the rear of the engine. You...
I have a Case 500 1956 with torgue Converter. I have the owners manual and several repair books. Let me know if you put up a picture and I will try to identify...
Hi Roger, I think you sent me some pics of yours in the early rebuild stage. A pic of my G500 is on the Yahoo site, photos, and is labeled G500. Waay to rainy...
I have scraped most of the paint off the frame from the front of the starter to the mounting plate. No numbers seen so far. It is painted green with the rams...
Bob Measure the tracks GT25's and GT30's had a tiny track on them and GT34 and up has a track the size of the 310/350 chain. Also on a 25 or 30 the tag was on...
I have the arms and the narrow track. Guessing it will go 8 inches on the track pads. ... and GT34 and up has a track the size of the 310/350 chain. Also on a...
Hello Jerry, I think 500s are the only ones with torque converter and clutch. Our 526 is a 1959 Case. They're not all here yet but I have bought a few parts...
Hi David, thanks for your informative note. I too think 500s are the only ones with clutch and torque converter. 400s had clutch and 3 spd and 600s had the ...
I just left messagges for the third time trying to find rollers for the new crawler. The one place, Crawler Heaven showes several in various stages of...
Hello, I wonder whether anyone can help identify this crawler: http://img.photobucket.com/albums/v506/Banjo1293/Misc/bd09e206.jpg As far as I know it's a Terra...
I don't know what it is, but am very interested in what the other guys have to say about it. I have a butchered-up unit that looks a lot like the basic unit...
i would like to sell my terratrac 600 has loader bucket on it needs upper shaft replaced on right hand side in final drive otherwise not to bad of shape i am...
he guys, merlyn is right. the gt 25 has 5 rollers. according to my info a gt 30 has 6. the roller on the gt 25 is 5.25 inches in diameter. the crawler in the...
... I don't know much, so I was going by the rear wheels. Take a look at the GT30 ad in the files section, it shows the same loader. I was surprised to see at,...
Check the left frame rail, it may be stamped on the top edge under several layers of paint, abput 20 inches from the front end of the frame. Thats where it was...
I have dealt with Eddie at Crawler Heaven and have been there picking up parts. He is fair and has a lot of stuff. However he works alone in the yard and may...
I got a completely new set of rollers and Idlers for my case 1000 from a local dealer in frankilin North Carlina. 10 new rollers and 2 new Idlers for $2200.00...
Andrew, All small tracked models pretty much had the lace sprockets until about 1953 -1954, not sure exactly when they changed. I think the main differences...
Where are you located? I might be interested in your crawler as a parts source for mine. ... guys have to say about it. I have a butchered-up unit that looks...
bobw63052, Bob, I am located in north central Wisconsin, Tomahawk is about 35 miles north of Wausau on US hwy 51. I would be interested in selling whatever...
Bob has a GT 25/30 the rolls for it are much much smaller than the rolls for a 1000 series and are not made as replacements by Berco or Itrac, the only source...
Hello Terrance, ... That loader does look what I've seen on assorted ag tractors. ATC also sold a much stouter loader on both of ... Would this process help...
David, Lye will remove paint, grease, and some rust, the numbers are stamped lightly, often when scraping the numbers are filled with paint and are not seen....
I am in the St. Louis area, so we are talking a long drive and a long way to trailer one of these crawlers. What do you want for it. If it is cheap enough,...
Bob, You should know that it is not a virgin. Someone removed the original engine and sheet metal and replaced the engine with a Wisconsin V-4, air cooled....
Terrance, I agree with you regarding documentation needing to be added to the web site. I'll bet there's a ton of information out there among group members ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
