Hello guys! My name is Yuri Pikulyk. I am building a CH21 here in Moscow, Russia. My question is about using staples. I could find here on marked only ...
Congratulations and welcome Yuri... great choice.... In regards to your question about staples..... I have used the 16mm Stainless Staples when I was...
Hi Everyone I've just upload 2 pictures of my boat. The basic hull is complete and I am now fiberglassing it with Dynel cloth. My plans are to have it ready...
... complete ... have ... too ... Hello Bill, Like you, we have completed the planking of the hull, covering the last top panels today with 120/m2 glass...
Here's how I plan to handle turning the boat 1. Build a cradle that wraps all the way around the boat. It will be flat on the bottom and curved on the side...
The current issue of Watercraft magazine has an article titled "Building the Cape Henry 21". Has anyone seen it? If so, would someone make a scan of it and...
Hi Bill, I cannot e-mail it as I do not have a scanner but if you have a fax, let me have the number and I will send it to you. Regards Gary ... From: "Bill...
... From: Bill Empsall [mailto:wempsall@...] Sent: Sunday, September 26, 2004 12:45 AM To: capehenry21@yahoogroups.com Subject: [capehenry21] What is...
Hi Folks, I really like the looks of Dudley Dix's CC-19 and CH-21. Keeping tabs on both to see if I really want to take on something like this. And, ...
I've posted 3 new pics of my boat which is now right side up on a trailer. There is also a picture of the roll over cradle which worked perfectly. I used the...
Greetings everyone, I discovered this just a couple days ago. Since then I have been busy catching up on the progress of the various boats under construction....
Bill, Congratulations on achieving the milestone of turning the hull - your boat looks fantastic. Progress on my boat has been somewhat slower during our...
I purchased a used trailer for my boat. It was originally used for a 20' Lyman Inboard runabout. I have to add another keel roller and adjust the bunk boards...
If you haven't checked Dudley's Cape Henry 21 web page recently, you will find a picture of Gary Wallis's boat on its trailer and it appears to be complete....
Hi All, Just to fill you in on my boat to date, she has not yet been on the water but I hope to have her ready for around the end of March beginning of April. ...
Hello everyone.. I have been quiet on my build. Had to put it on the backburner whilst I was establishing www.capeboatworks.com.au. We are now setup to Pre-Cut...
Hello Frans Here is a fellow from there looking for the Thames River 14 footer. ... Eric Van Nostrand Rainbow Boat Works 27 Ryan Road Saranac, NY 12981 ...
Hi there I am thinking of starting my next project and the 21 seems a great boat with just the right combo of style size and performance. What is the skill...
Frans my good man, **short pause while I kiss the hem of your robe** Lovely site my boy. Lovely. Even more lovely because I have recently fallen in love with...
Frans, You posted a document here detailing an alternative interior design. This involved moving and expanding the galley area. A couple of questions. First,...
John, Having completed the hull and after spending some time sitting in the boat, my opinion is that there should be no changes from the designer's plans....
For those of you who completed or started the foredeck, could you describe the construction sequence. The well, arched deck and bulworks with a notch to fit...
... curves. ... Hi Bill, We held a 'boat turning party' in early March, turned our CC19 over in two minutes and went to the pub! Since then I've made the...
Thanks David, I previously received info and a picture from Gary Wallis. Both of us have been building from kits, so all the parts are precut. He built the...
Hi Bill, I was going to build the curve in the same way as Gary. The thin pieces can be cut with tapering sides to accommodate differing radius at the top and...
... curves. ... Hi Bill, We held a 'boat turning party' in early March, turned our CC19 over in two minutes and went to the pub! Since then I've made the...
Hi Bill, We held a 'boat turning party' in early March, turned our CC19 over in two minutes and went to the pub! Since then I've made the foredeck I had...
David, I don't know about Bill, but I'd enjoy seeing the photos. If you haven't already, could you post some to the Yahoo Group photos section? I'm not a CC19...
I have uploaded some photos to the folder CC19_Ida The boat turning photos show how we turned the boat inside the poly tunnel where she is being built. The...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
