i have just about finished the first set. I will post pic's before next weekend. it was quite an education finding the right plastic as well as the glue that...
Anyone know where Pepsi syrup may be purchased online that would work in a breakmate? I understand I may have to put it into a "bag in the box" box to make it...
try this place: http://www.beverageexpress.com You can also get direct from pepsi! Setup an account with them, then just pickup it. You can find them in the...
I am having trouble bonding the nylon fittings to the boxes. Have only found 2 types of adhesive that is foodgrade. They are both pure rubber silicone and...
Are you trying to bond a syrup box nozzle to a acrylic box? I have heard of some people using hot melt glue, but that is only fda approved for non-direct,...
Expresso, Yes, I'm trying to bond the spout to the acryllic boxes. Hot melt will do it for awhile but if you put too much pressure upward when installing th...
Hey all: This is probably the most common question from a new Breakmate owner - where can I get the little co2 bottle refilled? Any specific suggestions in...
Hi Sanman, As a fellow Breakmate owner, let me pass along some info. I am not sure if I ever get 250 cups, in the smaller 6 oz setting, out of my CO-2...
I would get the adapter kit, a 20 pound bottles last a couple of years for me. Call the breakmate hotline, they will give you the location of your nearest...
Thanks, Do you know if the plastic "neck" that the doser connects to identical to that of the disposable boxes? "espressotoday" <jimmy101@...> 12/11/03...
I have a set of the original bottles, no its not, because they were meant to breakoff and fall inside the bottle, so they would not be reused. BUT, you can...
where do the coin op wires attach to the machine ??? I got one off of ebay and am putting it on the side of my breakmate. They are 1 gray connector female, 1...
its fairly simple, you should really have the repair manual! You match the same color wire with the same color on the smartboard. Attach the 2 white plugs to...
Thanks for your help and I got it going. I DO have a manual but I left it with my other machine about 700 miles away and don't get to go back there unitl the...
I just got this breakmate and got the coin box on it and I know this has nothing to do with the coin box but this unit freezes up. When I dispense anything...
Do you hear the agitator running? What do you get for normal and large ice bank lights during the test sequence? By disconnecting the two leads on top of the...
I had it turned off overnight and turned it on this morning and the box was about 50 degrees and the carbonated water output was at 32. I then ran the test and...
Unfortunately there are two styles of agitator (a loud and a not so loud). IF you hear noise from the agitator then it probably is still spinning. What...
Expresso, You were right the agitator was leaning against the side and there was still ice after 48 hrs in the carbonator. Is the agitator voltage 110 AC and...
Yes, he is good, but expensive. I bought a new one on ebay for $50. gotomybreakmate.com has them to and your local breakmate dealer. Learn how to choose,...
I HAVE BEEN TRYING TO PUT A BREAKMATE INTO SERVICE. I THOUGHT I FINALLY HAD ALL THE RIGHT PARTS TOGETHER. EXTERNAL CO2, SYRUP, REGULATOR, ETC. WE PLUGGED IT...
Very strange, behind the button panel cover, there are testing procedures, also theirs trouble shooting chart in the photo section of the group. Try those out,...
YES, I HAVE A REPAIR MANUAL. I CAN'T TEST BECAUSE THERE ARE NO LIGHTS ON. WE'VE CHECKED THE OHMS AND CONNECTION TO EACH PART. SEEMS TO HAVE GOOD WIRING. I'M...
