I'm looking for the adapter needed so I can fill the breakmate Co2 tanks from any local welding or paintball shop. All would love to fill it if i had the...
Thanks. The breakmate water filter replacement was an easy one. I used a GE refrigerator water/ice cube replacement from Home Depot for $15 and just...
Yeah it works, any syrup that is mixed in the 5 to 1 ratio works. Problem is the boxes don't last. And the plastic inside the box has folded corners, which...
I have a breakmate with the smart board. (Size button, Carbonated Water button, etc.). The low syrup indicator next to one of the flavor buttons began...
Hold the button next to the blinking light down and turn the main power switch off. When you turn the main power on again the counter resets. The number of...
Okay, well I found out its some kind of program where you get merchandise for the tops...kind of like that old Koolaid point program. Anyone with a flyer and...
Does anyone have a working super button? Thats the 6th button. My manual says its to increase the cooling temp for high volume of soda dispensing. Its suppose...
My Breakmate has started creating a frozen slush in the carbonator that causes the outlet valve to stop flowing. If I let it thaw out for a while it starts ...
make sure it is on the small ice bank setting. This is indicated by the bottom button in the out position. You need to take off the front button panel to get...
In the photos section you can see a picture of the original syrup containers, I happened to have picked up a set of 3 on ebay for $35. They work great for...
I would love to find some of those! I saw someone mention that you can laminate the boxes and reuse them, I would love some pictures and detailed instructions...
Simple, carefully take your syrup box apart, take note on how the plastic bag is glued to the cardboard. Go to kinkos or officemax, and ask them to laminate...
After buying a GA-4500 with coin-op, I couldn't test it. I cleaned it out and flushed it, but I noticed that the vacuum noise from the water pump lasts for...
Hi, I made a few mistakes on my query post. First off, I said that I owned a GA-4500. Actually, I own a GA-3450! Primary difference: G (W)-4500 is actually...
Perhaps your adjustment screw is to loose and leaking. Need more details, how is the soda quality? Is it to sweet or watery? Theres a picture of the adjustment...
Hi, When I said that the water poured back, I meant that after being sucked out of the watermate bottle, the pump would stop and half of it appeared to fill...
Breakmate tech says it sounds like you have some bad outlet valves and that would explain why someone would remove the syrup screw. That you should take that...
1-800-950-8887 this is the number to the breakmate hotline. Never state you're a home user, they won't help you. When calling say you need help with your...
Does anyone know how to open the front or back of the machine up? I want to check and see if my carb. and water valve needs replacing. Also, is there any...
You start by removing the all the screws in the rear that secure the metal cover, then you can remove the front cover. Once the covers are off, you should be...
