Tried my hand at making a batch of homemade tonic water syrup, and it came out pretty well. But, the foam is so excessive the mixing tray overflows almost...
For foamy sodas, I remove the metal screen in the mixing channel. It just pops out, pushing it up from the bottom. No more channel overflow from root beer....
First the unit must cool down. Carbonation is a function of temperature and pressure. When the BreakMate is first fired up the water will have the milky white...
Geez, and I was thinking I'd get some high tech chemistry solution for the problem! Both your suggestions sound reasonable, and in fact I currently have the...
If you find that removing the screen doesn't mix your other sodas well, you can take a scratch awl or something and make some bigger holes in the screen, I...
I am moving my machine from my home to my office. It's really heavy when full of water. How can I empty out the water before I move my machine? And, should I...
There is a co2 tank reviewer for sale on ebay right now. It is going for $154 with 5 data left. I really want to buy it but cant afford it right now. I...
I have been bidding on it but stopped at $150. In my opinion it isn't worth anymore than that. It seems as though it should be very simple to make. I...
Hi mike, I bid on it as well, but don't want to spend more than $100, so I quit. I have thought about making one from the fitting from the inside of a...
I think I can probably figure it out for free :). I am sure it is no larger than a 2 inch cube of brass (which is not cheap, it would cost around $17 just for...
I did some experimenting and have found that the goodtime containers are definitely dispensing less syrup. I bought a graduated cylinder and measured the...
Did you get the same results when there was a longer refresh time between the doses? In other words does it do any good to adjust the water if the containers...
Should you use 1/4" or 3/8" line to connect to external tank and fitting adapter? Do you need to take either the back cover of front cover off to run the line?...
1/4" works well. 3/8" would probably be to thick. I did without removing any covers, from the front out the back, then attached my brass fittings. If you can't...
I used 1/4 for my system. I only had to take the front off. I snaked the line in via a hole in the back. It's very straightforward, so suggestions aren'teally...
I'm not sure. I tried to check and it seemed that it did not matter. It seemed to be dispensing equal amounts everytime, but I am not convinced. I am out of...
ALL, If someone wants to send me a detailed drawing showing the measurements you want, I will measure mine for you. One other thing you should note, if you...
Not only is the larger opening going to let the doser refil faster, it would also hold some syrup that would be dispensed when the doser is activated. I would...
All, Check the files section on this group site, I have uploaded a file called refil station, I think this has what you are looking for. Remember though the...
Jamie, that is awesome. Thanks very much. I have a few questions. On the depth measurements, what is the reference point? When you say B is 4mm, does that...
After getting a message back from John Zimmer this morning I understand the process is a bit more complicated that I thought and I will probably just stay with...
Update to fill station After taking it all the way apart, there is a pin valve in the fill station. This pin doen't press the pin on the tank, infact, it is...
Hay John, Â back to you to the address that was on the envelope and it came back. It was the United Refreshments, Nebraska, 68503. Maybe I spelled something...
