My new breakmate is here, and have dosers. Was trying to test it to make sure it works but wanted to know if CO2 and water need to be attached to the unit to...
Remove the door with the buttons on it (clear one.. has a paper insert.. indicating the types of pop On the back of the paper insert.. there are instructions...
Go through diagnostic on back of face plate to test all operations.Jimmy **************Plan your next getaway with AOL Travel. Check out Today's Hot 5 Travel...
Are doser overhaul kits still available someplace? I bought a new doser for $50 from MrBreakmate a while back, and it's working well. But now my other, older...
Hello all, OK MY breakmate has a weird issue. The carbonator freezes up sometimes. This is the 2nd agitator for this machine and its the new style one. What I...
Hi, I'm currently set at the larger (10oz.?) serving size, and was wondering how I change the setting to switch to the smaller 8 oz. serving. Thanks in advance...
I have a Breakmate for sale. I thought I'd post on here before going the ebay route.... In addition to the unit, I have: Coin-op CO2 converter to use with...
How much do you want? Mike From: breakmate@yahoogroups.com [mailto:breakmate@yahoogroups.com] On Behalf Of boilerfan4 Sent: Tuesday, November 11, 2008 12:18 PM...
If you have any plastic syrup boxes I would be interested in those From: breakmate@yahoogroups.com [mailto:breakmate@yahoogroups.com] On Behalf Of boilerfan4 ...
How much were you asking for the package? ... From: boilerfan4 To: breakmate@yahoogroups.com Sent: Tuesday, November 11, 2008 2:25 PM Subject: [breakmate] Re:...
Sorry - left that out... I'll sell the unit and all of the accessories for $250 plus shipping. I saw one that just sold on ebay for $265 without any of the...
I thought I would try selling this unit here before I put on eBay. I bought this Breakmate Soda Machine (limited edition/white one) on eBay for a my military...
Does anyone have any tips on how to remove the brass nozzle from the 1.25 lb CO2 cylinders? I am wanting to remove it in order to make a CO2 adapter. Thanks!...
Hi Mike. John Zimmer here. I have a brand new never used White BreakMate. the dosers, drip tray and mixing channel are all new. The mixing channel is a a...
As long as there is no pressure in the tank you can remove the brass valve on the CO2 tank with no problems using a wrench. Don't do it with CO2 or pressure...
Although not necessary, after removing the brass fitting and tapping it as described in the other post I drilled a hole in the bottom of the cylinder, ran the...
I'm in Indianapolis. ... From: Hank <heskin@...> Subject: Re: [breakmate] Re: Breakmate for Sale To: breakmate@yahoogroups.com Date: Tuesday, November...
I was putting together this White Breakmate Soda Machine I won on eBay that included: a 20 oz. CO2 bottle Overall this machine is in GOOD condition! Has been...
I just got a used breakmate machine. It makes a lot of rhythmic sounds like a stomach grumbling when I turn it on. The co2 light stays on even with a fresh co2...
THAT SINGLE WIRE,MOST LIKLY GOES TO THE SAFETY WATER SWITCH ,IN CASE THE WATER GETS IN THE PAN BELOW IT SHUTS THE MACHINE DOWN ,SO YOU DONT GET SHOCKED ITS A...
the sounds that you talk about is the agitator in the carbonator. When it is under pressure with co2 it will be much quieter . Early BreakMates had a check...
I found the two wires, one going to the water detector and one going to the compressor. I have two more wires with connectors that resting between the circuit...
Our breakmate has become noisy whenever the motor comes on while dispensing a drink. Does anybody know what part is making the noise and what would be the fix?...
