I received my BeeLine transmitter (about 2 years ago) with the antenna laid out away from the circuit board. Here is a photo of a similarly laid out antenna...
BigRedBee, LLC is running a few specials for the next couple of weeks. Orders must be placed by 5pm on July 24th. BeeLine GPS (70 cm): FREE Upgrade to digital...
So, I did my due dilligence and thought I found an answer to the problem. Message 85 seemed to have tha same problem but the thread ended before a solution...
Garry, Since you can see the data in Hyperterminal, you have confirmed that both the GPS transmitter and the comport cable, adapters, etc. are all working just...
1) com port 6 2) Nothing, keeps sending GPS data 3) See below 4) Keeps sending GPS data My conclusion is that my machine is no talking to the bee. This could...
... Yes, it sounds like the bee isn't hearing the PC. ... If you're using a true serial port instead of USB, then you need to use a straight thru cable, NOT a...
Reply # 2 (sigh) After I sent the last reply, I got to thinking (oh oh). Hyper Terminal and the bee program can't work at the same time! (duh). So I used the...
I just received some new boards integrating an amplifier module with the BeeLine transmitter (just the FM beacon, not the APRS transmitter). The result is a...
That sounds like something that the super high altitude folks would enjoy. If someone were to be using their own antenna connected by the SMA option, could...
... Yes -- early version of the 2 meter high power transmitter had a similar problem. Using an antenna like a j-pole or a bazooka seemed to solve the problem,...
I'm interested! ________________________________ From: bigredbee@yahoogroups.com on behalf of k7rkt Sent: Fri 7/31/2009 11:36 AM To: bigredbee@yahoogroups.com ...
Hi all, I ordered a new LiPo battery online from an RC store since Greg is on vacation and the original got damaged in a small crash. I got a 3.7v 350mAh LiPo...
Hi Lucas, I'm back. The charger will work for any lipo battery that accepts a charge rate of 100 mah or more. So, you should be safe with anything but the ...
I've had some questions regarding the heatsink on the voltage regulator on the 2 Meter GPS transmitter. Hope the following clarifies the situation: The 2...
Hello, I am the proud owner of a new 902MHz unit. I am quite enjoying it. One question for the group, I went to buy a new connector to put on a different...
Digikey Part # A310393-ND is the 3-pin blue connector. For $2.00 to cover the shipping, I'll send you a few if you'd like. I'll attach wires as well since...
Hi Is there any problems with squishing a BeelineGPS and a Beeline TX together in a 38mm tube. Was going to have the tx in the drogue bay but its too tight of...
... I'm curious to see how it went, too. I had the issue with the GPS not getting a lock when transmitting constantly. That was with the 2M transmitter,...
Greg, as you said, it wouldn't maintain lock as soon as the beeline was turned on. Any idea roughly how far apart they need to be roughly? Ethan From:...
Ethan, I'll certainly defer to Greg on any information he provides, but I thought I'd share my situation -- I have the 2-meter transmitter unit coupled with...
Jeff, I'm using the standard 70cm version, and it doesn't have that logic available. I seem to have fixed the problem by moving the BeelineTX away from the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
