You can go to radio shack and they’ll fit the proper adapter onto a standard Cigarette lighter plug for you if you bring the radio in. Since the input to...
... As soon as I saw that the wall-wart delivered 12 volts, I built myself a car-charger cord from the junk box. I had never seen one up close, so I forgot to...
I too have noticed that the batteries in my 245 get too toasty if I'm using the cigarette cord for power. Chances are there isn't any current limiting in that...
I just took time to read the board and found of all the work done downloaded new version and works great thanks Guys for getting it updated. I see several post...
I have no idea if it works or not, but I compiled it and put it on the ftp site. Let us all know how it works! ftp://q.herzig.net/pub/bc245/listenbeta5.exe ...
It seems to work, though it does not seem suited to a 56k dialup :-( I had a friend put listen.exe on his work computer and he connected to my scanner, which...
I've reworked the way the main application sends data to the remote, it sends a whole refresh every .4 seconds, instead of every .05 seconds like it was...
When uploading EDAC ID's they won't take. The ID descriptions for the trunked ID's are there, but no ID number after the upload. What's happening? So far it...
This is in reference to my previous message. It appears that my scanner is allowing uploads to occur but ONLY and ONLY IF I put the decimal version of the...
Actually, anyone should be able to do this who has TCP/IP- which, if you are reading this, means you do. Just use an IP address of 127.0.0.1. Mike ... ...
I am sorry to say that you cannot upgrade the firmware inside the bc245xlt... ... From: "jtherrmann" <jtherrmann@...> To: <bc245int@yahoogroups.com> ...
Haved had both & they are equally capable of trunking just that the older firmware has a 5 second delay when switching from trunking to conventional. I did...
rgg1@...
Dec 25, 2001 1:22 pm
753
Hi List, I am looking for a Uniden BC245XLT trunk tracker for a resonable price if anybody is looking at selling one. It must have the Australian EPROM...
When you find the bastard who stole it, punch them in the face a few times for me. ... __________________________________________________ Do You Yahoo!? Send...
With v2.4.1 I've successfully uploaded from my scanner the existing frequencies and trunking i.d.'s of which four were Motorola Type I, one EDACs and one...
Are they happening to only EDACS ID's or Motorala ID's only or both? ... __________________________________________________ Do You Yahoo!? Send your FREE...
Have you tried uploading them in any other format? ... __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings...
Bryan, Just tried an EDACs system and the same thing - existing trunking i.d.'s are overwritten with blanks! Craig ... From: "Bryan" <sp__kenny@...> To:...
Craig, Well at least with your EDACS banks you have exactly what is happening with me. The author of the software gave me an update to try but it didn't work....
I have a brans new one that Uniden sent in exchange for my unit which was in for warrenty. Not sure it has the Aussie chip? How do I check? Roger ... From:...
rgg1@...
Dec 27, 2001 3:52 pm
764
... Bryan, I took a look at the code that does the upload, and it performs a check to make certain the ID is numeric. An ID in the form of ##-### would...
Hi Mark, I was hoping you'd jump in here. ;) Thanks. Kevin ... From: silbernagelmark [mailto:marks@...] Sent: Thursday, December 27, 2001 10:57 AM To:...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
