Lynn,

Any progress on using the radio and GPS data from a Byonics TT4 so
APRSIS32 will support seeing your own station move on the map?

Tim N9PUZ


On 5/2/2011 8:02 PM, Lynn W Deffenbaugh (Mr) wrote:
> Ok, I'm not going to delay any longer, but am pushing the current
> version out as a general release.   The Wiki has some good information,
> but more will be forthcoming.  If you have any questions about a new
> feature, post it here and it'll either get answered, or a Wiki page link
> will be provided.
>
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

What's wrong with this filter? -s/w -b/CW* t/m/W9JUN-10/1207 d/RS0ISS-4 m/80
s/+Sco/Sy/ o/EL-571205

I'm getting posts from world wide. I have yet to learn how to use some of these
filters correctly.

Negative.  I've been really busy with my day job and trying to get loose
ends of the current development wrapped up so that this general release
could get out the door.  Documentation still isn't as far along as I'd
have liked, but I just haven't had the time to spare and didn't want to
delay any longer.

I've got the TT4 support on the ToDo list and the RFPort/IGate/Digi
stuff is the next large development area I'll be opening, but it might
not actually happen for several more weeks based on 3 busy weeks of work
followed by 2 vacation weeks in Spain coming soon.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/2/2011 9:23 PM, Tim N9PUZ wrote:
> Lynn,
>
> Any progress on using the radio and GPS data from a Byonics TT4 so
> APRSIS32 will support seeing your own station move on the map?
>
> Tim N9PUZ
>
>
> On 5/2/2011 8:02 PM, Lynn W Deffenbaugh (Mr) wrote:
>> Ok, I'm not going to delay any longer, but am pushing the current
>> version out as a general release.   The Wiki has some good information,
>> but more will be forthcoming.  If you have any questions about a new
>> feature, post it here and it'll either get answered, or a Wiki page link
>> will be provided.
>>
>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>

On 5/2/2011 9:41 PM, don.w9jun wrote:
> What's wrong with this filter? -s/w -b/CW* t/m/W9JUN-10/1207 d/RS0ISS-4 m/80
s/+Sco/Sy/ o/EL-571205

I don't see anything wrong with it, but you'll probably get more than
you bargained for.

-s/w - No Water Stations

-b/CW* - No stations starting with CW (typically, but not always, CWOP
stations)

t/m/W9JUN-10/1207 - All messages within 1,207km of W9JUN-10 - This can
be a lot of stations

d/RS0ISS-4 - Everything digipeated by the ISS - This will be quite wide
ranging, but not a lot of stations

m/80 - 80 km around your most recent beaconed position

s/+Sco/Sy/ - All stations using symbols of:
Primary
+ = Red Cross
S = Shuttle
c = No. CivDef
o = EOC
Secondary
S = Sat/Pacsat
y = Sky Warn

o/EL-571205 - A specific EchoLink object

> I'm getting posts from world wide. I have yet to learn how to use some of
these filters correctly.

It might help if you provided a specific station that you don't expect
to be seeing.  Also, firenet.us seems to sometimes provide a burst of
packets that really don't match your filter to start with, but I haven't
nailed down the circumstances for that burst.  It seems to happen
shortly after a firenet.us server restart.

Are you sure you're still connecting to the filtered port (14580) and
not a full feed (10152) in Configure / Ports / APRS-IS / Device?

Best thing to do is eliminate all of the terms, Clear / Clear Stations,
and add them back one at a time until you determine which is the
offending term.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

So, I assume (dangerous) that is proper to create an area filter and that will
be sufficient to pass only symbols and messages from within that area and not
use the m/80
--- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
>
> On 5/2/2011 9:41 PM, don.w9jun wrote:
> > What's wrong with this filter? -s/w -b/CW* t/m/W9JUN-10/1207 d/RS0ISS-4 m/80
s/+Sco/Sy/ o/EL-571205
>
> I don't see anything wrong with it, but you'll probably get more than
> you bargained for.
>
> -s/w - No Water Stations
>
> -b/CW* - No stations starting with CW (typically, but not always, CWOP
> stations)
>
> t/m/W9JUN-10/1207 - All messages within 1,207km of W9JUN-10 - This can
> be a lot of stations
>
> d/RS0ISS-4 - Everything digipeated by the ISS - This will be quite wide
> ranging, but not a lot of stations
>
> m/80 - 80 km around your most recent beaconed position
>
> s/+Sco/Sy/ - All stations using symbols of:
> Primary
> + = Red Cross
> S = Shuttle
> c = No. CivDef
> o = EOC
> Secondary
> S = Sat/Pacsat
> y = Sky Warn
>
> o/EL-571205 - A specific EchoLink object
>
> > I'm getting posts from world wide. I have yet to learn how to use some of
these filters correctly.
>
> It might help if you provided a specific station that you don't expect
> to be seeing.  Also, firenet.us seems to sometimes provide a burst of
> packets that really don't match your filter to start with, but I haven't
> nailed down the circumstances for that burst.  It seems to happen
> shortly after a firenet.us server restart.
>
> Are you sure you're still connecting to the filtered port (14580) and
> not a full feed (10152) in Configure / Ports / APRS-IS / Device?
>
> Best thing to do is eliminate all of the terms, Clear / Clear Stations,
> and add them back one at a time until you determine which is the
> offending term.
>
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>

m/80 will get you a moving radius of 80km around your last beaconed
position.  That will get you EVERY packet in that range.

If you want to do an explicit area filter as well, you can do that as
either a radius around a point or as a rectangle of lat/lons.

Remember that each term ADDs unless it starts with a minus (-).  A hit
on ANY component will let a packet through, they're ORed together, not
ANDed.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/2/2011 10:13 PM, don.w9jun wrote:
> So, I assume (dangerous) that is proper to create an area filter and that will
be sufficient to pass only symbols and messages from within that area and not
use the m/80
> --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)"<kj4erj@...>  wrote:
>> On 5/2/2011 9:41 PM, don.w9jun wrote:
>>> What's wrong with this filter? -s/w -b/CW* t/m/W9JUN-10/1207 d/RS0ISS-4 m/80
s/+Sco/Sy/ o/EL-571205
>> I don't see anything wrong with it, but you'll probably get more than
>> you bargained for.
>>
>> -s/w - No Water Stations
>>
>> -b/CW* - No stations starting with CW (typically, but not always, CWOP
>> stations)
>>
>> t/m/W9JUN-10/1207 - All messages within 1,207km of W9JUN-10 - This can
>> be a lot of stations
>>
>> d/RS0ISS-4 - Everything digipeated by the ISS - This will be quite wide
>> ranging, but not a lot of stations
>>
>> m/80 - 80 km around your most recent beaconed position
>>
>> s/+Sco/Sy/ - All stations using symbols of:
>> Primary
>> + = Red Cross
>> S = Shuttle
>> c = No. CivDef
>> o = EOC
>> Secondary
>> S = Sat/Pacsat
>> y = Sky Warn
>>
>> o/EL-571205 - A specific EchoLink object
>>
>>> I'm getting posts from world wide. I have yet to learn how to use some of
these filters correctly.
>> It might help if you provided a specific station that you don't expect
>> to be seeing.  Also, firenet.us seems to sometimes provide a burst of
>> packets that really don't match your filter to start with, but I haven't
>> nailed down the circumstances for that burst.  It seems to happen
>> shortly after a firenet.us server restart.
>>
>> Are you sure you're still connecting to the filtered port (14580) and
>> not a full feed (10152) in Configure / Ports / APRS-IS / Device?
>>
>> Best thing to do is eliminate all of the terms, Clear / Clear Stations,
>> and add them back one at a time until you determine which is the
>> offending term.
>>
>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

Oh, one more thing.  The m/80 is redundant as APRSISCE/32 provides an
automatic m/ filter based on Configure / General / Range.  You don't
need to specify your own.  See also
http://aprsisce.wikidot.com/automatic-filters

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/2/2011 10:13 PM, don.w9jun wrote:
> So, I assume (dangerous) that is proper to create an area filter and that will
be sufficient to pass only symbols and messages from within that area and not
use the m/80
> --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)"<kj4erj@...>  wrote:
>> On 5/2/2011 9:41 PM, don.w9jun wrote:
>>> What's wrong with this filter? -s/w -b/CW* t/m/W9JUN-10/1207 d/RS0ISS-4 m/80
s/+Sco/Sy/ o/EL-571205
>> I don't see anything wrong with it, but you'll probably get more than
>> you bargained for.
>>
>> -s/w - No Water Stations
>>
>> -b/CW* - No stations starting with CW (typically, but not always, CWOP
>> stations)
>>
>> t/m/W9JUN-10/1207 - All messages within 1,207km of W9JUN-10 - This can
>> be a lot of stations
>>
>> d/RS0ISS-4 - Everything digipeated by the ISS - This will be quite wide
>> ranging, but not a lot of stations
>>
>> m/80 - 80 km around your most recent beaconed position
>>
>> s/+Sco/Sy/ - All stations using symbols of:
>> Primary
>> + = Red Cross
>> S = Shuttle
>> c = No. CivDef
>> o = EOC
>> Secondary
>> S = Sat/Pacsat
>> y = Sky Warn
>>
>> o/EL-571205 - A specific EchoLink object
>>
>>> I'm getting posts from world wide. I have yet to learn how to use some of
these filters correctly.
>> It might help if you provided a specific station that you don't expect
>> to be seeing.  Also, firenet.us seems to sometimes provide a burst of
>> packets that really don't match your filter to start with, but I haven't
>> nailed down the circumstances for that burst.  It seems to happen
>> shortly after a firenet.us server restart.
>>
>> Are you sure you're still connecting to the filtered port (14580) and
>> not a full feed (10152) in Configure / Ports / APRS-IS / Device?
>>
>> Best thing to do is eliminate all of the terms, Clear / Clear Stations,
>> and add them back one at a time until you determine which is the
>> offending term.
>>
>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

Ok, will do...Lastly, why am I getting stations from 10k miles away. Apparently
the m/80 or t/m/1207 has no bearing on the symbols

--- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
>
> Oh, one more thing.  The m/80 is redundant as APRSISCE/32 provides an
> automatic m/ filter based on Configure / General / Range.  You don't
> need to specify your own.  See also
> http://aprsisce.wikidot.com/automatic-filters
>
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>
> On 5/2/2011 10:13 PM, don.w9jun wrote:
> > So, I assume (dangerous) that is proper to create an area filter and that
will be sufficient to pass only symbols and messages from within that area and
not use the m/80
> > --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)"<kj4erj@>  wrote:
> >> On 5/2/2011 9:41 PM, don.w9jun wrote:
> >>> What's wrong with this filter? -s/w -b/CW* t/m/W9JUN-10/1207 d/RS0ISS-4
m/80 s/+Sco/Sy/ o/EL-571205
> >> I don't see anything wrong with it, but you'll probably get more than
> >> you bargained for.
> >>
> >> -s/w - No Water Stations
> >>
> >> -b/CW* - No stations starting with CW (typically, but not always, CWOP
> >> stations)
> >>
> >> t/m/W9JUN-10/1207 - All messages within 1,207km of W9JUN-10 - This can
> >> be a lot of stations
> >>
> >> d/RS0ISS-4 - Everything digipeated by the ISS - This will be quite wide
> >> ranging, but not a lot of stations
> >>
> >> m/80 - 80 km around your most recent beaconed position
> >>
> >> s/+Sco/Sy/ - All stations using symbols of:
> >> Primary
> >> + = Red Cross
> >> S = Shuttle
> >> c = No. CivDef
> >> o = EOC
> >> Secondary
> >> S = Sat/Pacsat
> >> y = Sky Warn
> >>
> >> o/EL-571205 - A specific EchoLink object
> >>
> >>> I'm getting posts from world wide. I have yet to learn how to use some of
these filters correctly.
> >> It might help if you provided a specific station that you don't expect
> >> to be seeing.  Also, firenet.us seems to sometimes provide a burst of
> >> packets that really don't match your filter to start with, but I haven't
> >> nailed down the circumstances for that burst.  It seems to happen
> >> shortly after a firenet.us server restart.
> >>
> >> Are you sure you're still connecting to the filtered port (14580) and
> >> not a full feed (10152) in Configure / Ports / APRS-IS / Device?
> >>
> >> Best thing to do is eliminate all of the terms, Clear / Clear Stations,
> >> and add them back one at a time until you determine which is the
> >> offending term.
> >>
> >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
> >>
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>

On Mon, May 2, 2011 at 7:42 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:

> Documentation still isn't as far along as I'd
> have liked, but I just haven't had the time to spare and didn't want to
> delay any longer.

We're working on that... everyone can help with that task. Ask
questions, and we'll work on trying to create some more documentation
as we go along. If you know how a feature of APRSISCE/32 works, write
up a page describing that feature, and post it. We can take that and
format it up for the Wiki.

> I've got the TT4 support on the ToDo list and the RFPort/IGate/Digi
> stuff is the next large development area I'll be opening, but it might
> not actually happen for several more weeks based on 3 busy weeks of work
> followed by 2 vacation weeks in Spain coming soon.

Hey, if we can keep Lynn busy for 5 weeks, we might be able to catch
up with documentation. That work thing gets in the way for many of us.
I just did an 18 hour day on Sunday to meet a customer deadline, and
I'm still beat today!

I did however push some packets through the ISS on the way home. I was
bouncing packets off the space station while the Navy Seals were
bouncing bullets around Osama's house!

http://ariss.net/

James
VE6SRV

On Mon, May 2, 2011 at 9:42 PM, Arte Booten <pn2zrc@...> wrote:

>     Lynn has mentioned some keyboard shortcuts to certain functions.  It'd be
> nice to have a list of them.                                                73

Sure, that would be great... can you compile a list of them, and we'll
add them to the Wiki.

James
VE6SRV

Hi Lynn,
All looks good..
Restart is fine in the close box...

First run through. no obvious issues..

Kim
--- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
>
> LclRF now shows the used hop count.
>
> QRU queries will now transmit normal objects if the requester is
> considered "recently" "local" (currently 30 minutes and 2 hops) and the
> object in question is Via RF enabled.  (Julian G4ILO)
>
> Limit ANSRVR group names to 15 characters.  (indirectly Steve G6UIM)
>
> Support Configure / Status Report / DX toggle to insert DX: information
> into a status report transmission.  The information is the same hourly
> DX as it stands when the Configure / Status / Interval expires for
> transmission.
>
> Correction, each time a new DX is detected, the status report is
> transmitted.  Note that for multi-RF-port instances, this can be a bit
> redundant as the status report only carries the maximum DX across all
> ports.  You can also expect a few extra status reports to be transmitted
> immediately at the start of each new clock hour.
>
> Corrected a windows resource leak of 1 GDI object for each Message Box
> displayed.  There still may be more...
>
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>

That is correct.  Each term in the filter is ORed together.  A hit on
any component will allow the packet to be delivered.  There is no filter
that can get you a symbol selection within a range.  If you're not on
mobile Internet, or on a low-powered platform, I'd just ignore the
"extra" stations if you want what the filter delivers.

But, then again, if you only want symbols in range of me, the symbol
filter is redundant.  The m/nnnn filter gives you everything in that
range to start with and is, in many cases, the only filter you need
which is why APRSISCE/32 makes that component automatic.

To see what actual filter is being sent to the APRS-IS servers, look at
Enables / View Logs / Filter.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/2/2011 10:25 PM, don.w9jun wrote:
> Ok, will do...Lastly, why am I getting stations from 10k miles away.
Apparently the m/80 or t/m/1207 has no bearing on the symbols
>
> --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)"<kj4erj@...>  wrote:
>> Oh, one more thing.  The m/80 is redundant as APRSISCE/32 provides an
>> automatic m/ filter based on Configure / General / Range.  You don't
>> need to specify your own.  See also
>> http://aprsisce.wikidot.com/automatic-filters
>>
>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>>
>> On 5/2/2011 10:13 PM, don.w9jun wrote:
>>> So, I assume (dangerous) that is proper to create an area filter and that
will be sufficient to pass only symbols and messages from within that area and
not use the m/80
>>> --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)"<kj4erj@>   wrote:
>>>> On 5/2/2011 9:41 PM, don.w9jun wrote:
>>>>> What's wrong with this filter? -s/w -b/CW* t/m/W9JUN-10/1207 d/RS0ISS-4
m/80 s/+Sco/Sy/ o/EL-571205
>>>> I don't see anything wrong with it, but you'll probably get more than
>>>> you bargained for.
>>>>
>>>> -s/w - No Water Stations
>>>>
>>>> -b/CW* - No stations starting with CW (typically, but not always, CWOP
>>>> stations)
>>>>
>>>> t/m/W9JUN-10/1207 - All messages within 1,207km of W9JUN-10 - This can
>>>> be a lot of stations
>>>>
>>>> d/RS0ISS-4 - Everything digipeated by the ISS - This will be quite wide
>>>> ranging, but not a lot of stations
>>>>
>>>> m/80 - 80 km around your most recent beaconed position
>>>>
>>>> s/+Sco/Sy/ - All stations using symbols of:
>>>> Primary
>>>> + = Red Cross
>>>> S = Shuttle
>>>> c = No. CivDef
>>>> o = EOC
>>>> Secondary
>>>> S = Sat/Pacsat
>>>> y = Sky Warn
>>>>
>>>> o/EL-571205 - A specific EchoLink object
>>>>
>>>>> I'm getting posts from world wide. I have yet to learn how to use some of
these filters correctly.
>>>> It might help if you provided a specific station that you don't expect
>>>> to be seeing.  Also, firenet.us seems to sometimes provide a burst of
>>>> packets that really don't match your filter to start with, but I haven't
>>>> nailed down the circumstances for that burst.  It seems to happen
>>>> shortly after a firenet.us server restart.
>>>>
>>>> Are you sure you're still connecting to the filtered port (14580) and
>>>> not a full feed (10152) in Configure / Ports / APRS-IS / Device?
>>>>
>>>> Best thing to do is eliminate all of the terms, Clear / Clear Stations,
>>>> and add them back one at a time until you determine which is the
>>>> offending term.
>>>>
>>>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

I need to know more about what you mean by "load the check points".
APRSISCE/32 does objects and now supports UI-View-style overlay (.POS)
files.  Either of these can be used for the checkpoints.  I'm assuming
the runner has a live tracker?  Even if not, a radio'd position of the
runner can be manually updated by moving an object.

I'm cross-posting your question to the Yahoo group because I'm fairly
certain someone there has already supported an event like this with
APRSISCE/32 as part of the communications mix.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/3/2011 1:22 AM, David Friese wrote:
> On 4/27/2011 5:55 PM, David Friese wrote:
>> Lynn,
>>
>> For the B2V race we use that other program. I suggested we switch to
>> yours. They asked if we could load the check points somehow to we can
>> tell where the runner is. Does the program already do this?
>>
>> David
>
>
>

Hi Guys

The Net14 Report for April 2011 has been uploaded to www.net14.org.uk . Select
the Net14 News button for news, maps and activity tables for 20m and 30m APRS.

The month produced some exceptional DX in particular with 9A3ADE-14 a /MM
station on a tanker en route to and from Japan. Direct contacts of over 10,000m
were made.

Lynn says "I consider Net14 a good match for some of the messaging features of
APRSISCE/32 and encourage all non-tracking APRS uses in the group."

73

Jim, G0JXN/MB7UXN

Yes, DX reports going out over VHF and HF just fine.

I didn't update prior to using QRU ?WOTA this morning but I received objects
anyway. It's really useful when you have forgotten the LDW number.

Julian, G4ILO

--- In aprsisce@yahoogroups.com, "vk2asy" <vk2asy@...> wrote:
>
> Hi Lynn,
> All looks good..
> Restart is fine in the close box...
>
> First run through. no obvious issues..
>
> Kim
> --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@> wrote:
> >
> > LclRF now shows the used hop count.
> >
> > QRU queries will now transmit normal objects if the requester is
> > considered "recently" "local" (currently 30 minutes and 2 hops) and the
> > object in question is Via RF enabled.  (Julian G4ILO)
> >
> > Limit ANSRVR group names to 15 characters.  (indirectly Steve G6UIM)
> >
> > Support Configure / Status Report / DX toggle to insert DX: information
> > into a status report transmission.  The information is the same hourly
> > DX as it stands when the Configure / Status / Interval expires for
> > transmission.
> >
> > Correction, each time a new DX is detected, the status report is
> > transmitted.  Note that for multi-RF-port instances, this can be a bit
> > redundant as the status report only carries the maximum DX across all
> > ports.  You can also expect a few extra status reports to be transmitted
> > immediately at the start of each new clock hour.
> >
> > Corrected a windows resource leak of 1 GDI object for each Message Box
> > displayed.  There still may be more...
> >
> > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
> >
>

I ordered the Roving Network Bluetooth Serial Adapter, RN-240M today. I am anxious to see how it works.

 

Learned something interesting today which I did not expect. I do not have the SIM card installed. Everything is planned for through RF and Wi-Fi when available. I installed ActiveSync from Microsoft. While the Tilt is connected to my desktop with no Wi-Fi, it gets data through my desktop network connection. How cool is that!? So I can test here CE and 32 at my desktop.

 

Now, the file structure is basically like my desktop, however, I moved APRSISCE and thought the XML etc would be in the same subdirectory as the program and the tiles in a sub-directory. It created new stuff in the root, Mobile Device.

 

I found that I actually have a uSD, 4GB, card and want to put everything there. What is the best way to get it running only off the uSD card?

 

Thanks!

 

Best regards,

Fred, N7FMH

 

PS. Now to find replacement front and back covers as these are beat up a bit.

 

 

---

From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf Of w7boz
Sent: Monday, May 02, 2011 04:49
To: aprsisce@yahoogroups.com
Subject: [aprsisce] Re: Bluetooth module

 

A Tilt for $10. Thats a great deal. Pretty easy to connect the Tilt to a Bluetooth device. Not sure about the T2.... I use my HTC HD2 running aprsisce/ce to a Bluetooth to serial module I am working on. Once you get the devices talking you configure it as a com port. Well, at least on mine. :) If run in to problems let me know and I will try to help you.

Kevin
W7BOZ

PS. To anyone in terested, I will have my HTC Mogul that works with Aprisce very well for sell shortly. If interested email me and I will give you details and a price.

--- In aprsisce@yahoogroups.com, "Fred Hillhouse Jr" <fmhillhouse@...> wrote:
>
> Greetings,
>
>
>
> Went to NEAR-FEST Friday and picked up some new toys. Well, not really new
> but new to me anyway. One of these items was a Tilt for $10.
>
>
>
> My goal now is to connect a T2-301 to it via Bluetooth. One of the first
> hits from Googling, I came up with this link: http://www.rovingnetworks.com/
>
>
>
> I am sure there are many others, and I suspect some are better than others.
> Any recommendations?
>
>
>
> Thanks!
>
>
>
> Best regards,
>
> Fred, N7FMH
>

I am trying to figure out how to edit the XML on the HTC Tilt. Is there a Notebook or equivalent?

 

Thanks!

 

Fred, N7FMH

Hi Fred.

I have a Notepad on my HTC Touch Pro. I think I downloaded it when I was in
Prague and needed to change a setting and didn't have a PC to sync to.

Lord knows where I got it from, but the About says it is by Tillanosoft
http://tillanosoft.com.

HTH.

Julian, G4ILO

--- In aprsisce@yahoogroups.com, "Fred Hillhouse" <fmhillhouse@...> wrote:
>
> I am trying to figure out how to edit the XML on the HTC Tilt. Is there a
> Notebook or equivalent?
>
> Thanks!
>
> Fred, N7FMH
>

Nice tool Julian!  I just tried it and it at least opened the
APRSISCE.XML file, but to anyone that receives an error that the file is
too large, try re-starting APRSISCE and doing Clear / Accumulated /
Clear Telemetry.  I run the u/APWW*/APWM* filter on my phone, so I
accumulate definitions for all APRSISCE/32 users which can be quite
extensive.  After clearing them, Pocket Notepad had no issues loading
the configuration file.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/3/2011 4:30 PM, g4ilo wrote:
> Hi Fred.
>
> I have a Notepad on my HTC Touch Pro. I think I downloaded it when I was in
Prague and needed to change a setting and didn't have a PC to sync to.
>
> Lord knows where I got it from, but the About says it is by Tillanosoft
http://tillanosoft.com.
>
> HTH.
>
> Julian, G4ILO
>
> --- In aprsisce@yahoogroups.com, "Fred Hillhouse"<fmhillhouse@...>  wrote:
>> I am trying to figure out how to edit the XML on the HTC Tilt. Is there a
>> Notebook or equivalent?
>>
>> Thanks!
>>
>> Fred, N7FMH
>>

Fixed display of currently connected APRS-IS server on ME's station
popup.  This shows the actual IP address of a rotation DNS name
translation.  (Steve G6UIM)

Attempt to detect and ignore concatenated packets.  They will show up in
a new Concat trace log.  Note that this may unfortunately find and
ignore false positives like entire >dest,path,path,path: specifications
in a message body, but how often does THAT occur?

Lynn (D) - KJ4ERJ -  Author of APRSISCE for Windows Mobile and Win32

 

No, there is no plain text editor included with Windows Mobile.  That's why the instructions at http://aprsisce.wikidot.com/editing-xml-configuration talk about syncing the file back and forth (forth and back?).   I think Colin actually copies it to the SD card for editing, but I'm not sure.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/3/2011 2:59 PM, Fred Hillhouse wrote:

I am trying to figure out how to edit the XML on the HTC Tilt. Is there a Notebook or equivalent?

 

Thanks!

 

Fred, N7FMH

Doing a presentation to the local Radio Club on Friday night, any suggestions..

Lynn, Could you please generate a code for VK2ER Ross.. send to me off list...

Thanks 73 Kim

I happen to know that Fred, N7FMH, just did a presentation to h is club
last night.  Maybe he can offer suggestions or an outline?

The only thing I learned in the two APRS presentations I've done for
local clubs is that they really didn't want to know about APRSISCE/32,
but about APRS in general.  And one club had been 80% exposed to packet
and were very disillusioned while the other club had no previous
packet/APRS exposure and were stuck on the "why".  We did better at the
first than the second.  I've discovered that I'm better at presenting
what the client can do rather than what you might want to do with the
client, but that should be understandable given how little I actually
get out into the field with it!

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/4/2011 6:09 AM, vk2asy wrote:
> Doing a presentation to the local Radio Club on Friday night, any
suggestions..
>
> Lynn, Could you please generate a code for VK2ER Ross.. send to me off list...
>
> Thanks 73 Kim